| Age | Commit message (Collapse) | Author |
|---|
|
all local containers
|
|
|
|
|
|
private in-addr-util.[ch]
These are enough calls for a new file, and they are sufficiently
different from the sockaddr-related calls, hence let's split this out.
|
|
make use of it from machined
|
|
|
|
|
|
Alternative NTP implementations should add a:
Conflicts=systemd-timesyncd.service
to take over the built-in NTP functionality of systemd.
|
|
The systemd-escape utility might be used during early boot (e.g. when
being triggered from udev rules), so move it to rootbindir to support
systems with a split /usr setup.
|
|
|
|
This patch adds supports networkd to configure bond mode
during creation via persistent conf. Mode can be configured
with conf param 'Mode'. A new section Bond is added to the
conf to support bond mode.
These modes can be configured now.
balance-rr
active-backup
balance-xor
broadcast
802.3ad
balance-tlb
balance-alb
Example conf file: test-bond.conf
[NetDev]
Name=bond1
Kind=bond
[Bond]
Mode=balance-xor
Test case:
1. start networkd service:
12: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UNKNOWN mode DEFAULT group default
link/ether 22:89:6c:47:23:d2 brd ff:ff:ff:ff:ff:ff
2. find bond mode:
cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
Bonding Mode: load balancing (xor)
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
Changes:
1. Added file networkd-bond.c
2. Bond mode enum BondMode
3. conf section [Bond]
[tomegun: whitespace]
|
|
ConditionFirstBoot= instead
As Zbigniew pointed out a new ConditionFirstBoot= appears like the nicer
way to hook in systemd-firstboot.service on first boots (those with /etc
unpopulated), so let's do this, and get rid of the generator again.
|
|
or when creating OS images offline
A new tool "systemd-firstboot" can be used either interactively on boot,
where it will query basic locale, timezone, hostname, root password
information and set it. Or it can be used non-interactively from the
command line when prepareing disk images for booting. When used
non-inertactively the tool can either copy settings from the host, or
take settings on the command line.
$ systemd-firstboot --root=/path/to/my/new/root --copy-locale --copy-root-password --hostname=waldi
The tool will be automatically invoked (interactively) now on first boot
if /etc is found unpopulated.
This also creates the infrastructure for generators to be notified via
an environment variable whether they are running on the first boot, or
not.
|
|
This way we can reuse it other code thatn just localectl/localed +
timedatectl/timedated.
|
|
This is useful to test the behaviour of the compressor for various buffer
sizes.
Time is limited to a minute per compression, since otherwise, when LZ4
takes more than a second which is necessary to reduce the noise, XZ
takes more than 10 minutes.
% build/test-compress-benchmark (without time limit)
XZ: compressed & decompressed 2535300963 bytes in 794.57s (3.04MiB/s), mean compresion 99.95%, skipped 3570 bytes
LZ4: compressed & decompressed 2535303543 bytes in 1.56s (1550.07MiB/s), mean compresion 99.60%, skipped 990 bytes
% build/test-compress-benchmark (with time limit)
XZ: compressed & decompressed 174321481 bytes in 60.02s (2.77MiB/s), mean compresion 99.76%, skipped 3570 bytes
LZ4: compressed & decompressed 2535303543 bytes in 1.63s (1480.83MiB/s), mean compresion 99.60%, skipped 990 bytes
It appears that there's a bug in lzma_end where it leaks 32 bytes.
|
|
Add liblz4 as an optional dependency when requested with --enable-lz4,
and use it in preference to liblzma for journal blob and coredump
compression. To retain backwards compatibility, XZ is used to
decompress old blobs.
Things will function correctly only with lz4-119.
Based on the benchmarks found on the web, lz4 seems to be the best
choice for "quick" compressors atm.
For pkg-config status, see http://code.google.com/p/lz4/issues/detail?id=135.
|
|
|
|
This patch introduces TUN/TAP device creation support
to networkd.
Example conf to create a tap device:
file: tap.netdev
------------------
[NetDev]
Name=tap-test
Kind=tap
[Tap]
OneQueue=true
MultiQueue=true
PacketInfo=true
User=sus
Group=sus
------------------
Test:
1. output of ip link
tap-test: tap pi one_queue UNKNOWN_FLAGS:900 user 1000 group 1000
id:
uid=1000(sus) gid=10(wheel) groups=10(wheel),1000(sus)
context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
Modifications:
Added:
1. file networkd-tuntap.c
3. netdev kind NETDEV_KIND_TUN and NETDEV_KIND_TAP
2. Tun and Tap Sections and config params to parse
conf and gperf conf parameters
[tomegun: tweak the 'kind' checking for received ifindex]
|
|
|
|
file-hierarchy(7)
This new tool is based on "sd-path", a new (so far unexported) API for
libsystemd, that can hopefully grow into a workable API covering /opt
and more one day.
|
|
|
|
Instead of adjusting job timeouts in the core, let fstab-generator
write out a dropin snippet with the appropriate JobTimeout.
x-systemd-device.timeout option is removed from Options= line
in the generated unit.
The functions to write dropins are moved from core/unit.c to
shared/dropin.c, to make them available outside of core.
generator.c is moved to libsystemd-label, because it now uses
functions defined in dropin.c, which are in libsystemd-label.
|
|
|
|
This ways, distributions have an easier way to replace the OS specific
generic groups/users while keeping systemd's own.
|
|
When disk space taken up by coredumps grows beyond a configured limit
start removing the oldest coredump of the user with the most coredumps,
until we get below the limit again.
|
|
So that building from an archive works even if intltool is not present.
The README file already mentioned that intltool should only be required
when building from git.
Tested: Built it from the distribution archive on a host without intltool.
$ ./configure --enable-polkit
$ make
|
|
This treats it similarly to networkd, resolved and others and it matches
what 90-systemd.preset does.
|
|
|
|
This allows us to bootup a rootfs with a /usr directory only.
|
|
|
|
|
|
Should make the transition easier for exisiting users.
|
|
|
|
|
|
src/shared/async.c uses pthread so it will fail at link time if we link
only to libsystemd-shared and use async
|
|
|
|
|
|
|
|
|
|
Running "make dist" requires --enable-compat-libs since DIST_SOURCES will list
generated files such as libsystemd-daemon.c.
Tested:
$ ./configure && make && make dist
*** compat-libs must be enabled in order to make dist
make: *** [dist-check-compat-libs] Error 1
|
|
Running "make dist" requires Python support since some of the man page sources
(such as man/systemd.index.xml and man/systemd.directives.xml) are generated by
Python scripts, so break "make dist" and give an useful error message when
Python or the Python lxml module is not available.
Tested:
$ ./configure --without-python && make && make dist
*** python and python-lxml module must be installed and enabled in order to make dist
make: *** [dist-check-python] Error 1
|
|
Python support is pretty much essential to create man pages, so we should make
sure that distcheck will request it during configure.
Tested: Successfully ran "make distcheck" and confirmed --with-python was
present in the ./configure run inside the unpacked distribution directory.
|
|
File src/python-systemd/id128-constants.h is auto generated and its generation
does not require special tools, only sed. There is no point in bundling it in
the distribution archive, so let's mark it as nodist_ to have it excluded.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=80006
Tested: Successfully ran "make dist" after ./configure --without-python.
|
|
The sysusers.d/systemd.conf configuration file was originally introduced in
commit 1b99214789101, but it was not marked for cleanup. This caused distcheck
to complain about the file not being removed by distcleam.
Tested: Successfully ran "make distcheck" with this patchset.
|
|
|
|
If the file is not listed, then "make dist" will not include it.
Tested: "make distcheck" works after this fix is applied.
Fixes: 139b011ab81ccea1d51f09e0261a1c390115c6ff
|
|
It was incorrectly looking for a file in src/libsystemd-network/ when the file was actually deployed to src/systemd/ instead. This broke "make dist".
Tested: "make dist" works again after this patchset is applied.
Fixes: f20a35cc0d537dd4cfc1054cf7936b04a1700f3a
|
|
Makefile.am had a reference to it but it none of the sources included it.
Tested: "make dist" works again after this patchset is applied.
Fixes: 2ea8857effb833615b16d10fc7a19a7104c19e13
|
|
debug-generator can mask specific units if they are specified on the
kernel command line with systemd.mask=.
debug-generator can pull in debug-shell.service is systemd.debug-shell
is passed on the kernel command line.
|
|
Create a structure describing a DHCPv6 lease. Add internal functions
for creating a new lease and accessing the server ID, preference and
IAID. Provide functions for clearing addresses and associated timers.
External users are initially given only the capabilities of
referencing and unreferencing the lease structure.
|
