| Age | Commit message (Collapse) | Author |
|---|
|
The only functional change is that log_notice("No journal files were found.")
is not printed any more with --quiet. log_error("No journal files were opened
due to insufficient permissions.") is still printed.
I wasn't quite sure where to put this function, but shared/ seems to be the
right place and none of the existing files seem to fit too well.
v2: rename journal_access_check to journal_access_check_and_warn.
|
|
This reverts commit c22569eeeafa94cf510267071f5b75c4ab714e09.
Let's revert this for now, since it apparently doesn't fix the problem
at hand.
|
|
This reverts commit 00d1e0c9def4557c74f46cc2fe3a7ebc32a1dc8a.
|
|
fixes: #5419
|
|
As per commit 25e773e "udev: switch to systemd logging functions"
Now log_set_max_level() in udev_new() overwites system wide log level.
Propagate the udev.conf setting to log_set_max_level()
only if udev_new() is called from within udevd or one of its helpers.
Introduce a UDEV_PROPAGATE_LOG macro that we set with -D on
the gcc command line for all udev binaries we build, but not
for any others. The log_set_max_level() call is guarded by an
ifdef check for that macro, so that it only effects the various
udev binaries.
closes: #4525
|
|
|
|
Environment generators
|
|
We have ./configure switches for various parts of non-essential functionality,
let's add one for this new stuff too. Support for environment generators is
not conditional — if you don't want them, just don't install any.
|
|
Add support for /etc/environment and document the changes to the user manager
to automatically import environment *.conf files from:
~/.config/environment.d/
/etc/environment.d/
/run/environment.d/
/usr/local/lib/environment.d/
/usr/lib/environment.d/
/etc/environment
|
|
Why the strange name: the prefix is necessary to follow our own advice that
environment generators should have numerical prefixes. I also put -d- in the
name because otherwise the name was very easy to mistake with
systemd.environment-generator. This additional letter clarifies that this
on special generator that supports environment.d files.
|
|
v2:
- add example files to EXTRA_DIST
v3:
- rework for the new scheme where nothing is written to disk
v4:
- use separate dirs for system and user env generators
|
|
Environment file generators are a lot like unit file generators, but not
exactly:
1. environment file generators are run for each manager instance, and their
output is (or at least can be) individualized.
The generators themselves are system-wide, the same for all users.
2. environment file generators are run sequentially, in priority order.
Thus, the lifetime of those files is tied to lifecycle of the manager
instance. Because generators are run sequentially, later generators can use or
modify the output of earlier generators.
Each generator is run with no arguments, and the whole state is stored in the
environment variables. The generator can echo a set of variable assignments to
standard output:
VAR_A=something
VAR_B=something else
This output is parsed, and the next and subsequent generators run with those
updated variables in the environment. After the last generator is done, the
environment that the manager itself exports is updated.
Each generator must return 0, otherwise the output is ignored.
The generators in */user-env-generator are for the user session managers,
including root, and the ones in */system-env-generator are for pid1.
|
|
The change:
-/usr/lib/systemd/system/dbus-org.freedesktop.resolve1.service
+/etc/systemd/system/dbus-org.freedesktop.resolve1.service
If resolved is disabled, without this, talking to the resolved bus API will
activate it regardless whether it is enabled or not, let's fix that.
|
|
Fix "make install-tests" when srcdir != builddir, fix valgrind-tests
|
|
|
|
automake helpfully sets a few variables for during build. When our executable
is in a directory underneath $(abs_top_builddir), we know that we're in the
build environment $(abs_top_srcdir) contains the sources, and test data is
under $(abs_top_srcdir)/test. This remains true no matter where the build
directory is relative to the source directory. It also works if the test
executable is invoked as ./test-whatever or .libs/test-whatever, since the
relative path is not used at all.
When running from outside of the build directory, we should be running from the
installed location and we can look for ../testdata relative to the location of
the exe file.
Of course, $SYSTEMD_TEST_DATA always overrides this logic.
|
|
TEST_DIR is rather generic, and we prefix all variables used by installed
executables with "SYSTEMD_".
|
|
Otherwise we are missing $TEST_DIR for the test data and run the test
against the system-installed binaries and keyboard/locale maps.
|
|
Follow-up for 4f8425b8d5a3fb2e5ec24b77f1a7a95db55f532c
|
|
TEST_DATA_FILES
This is a follow-up for 625d8769fa6394a30
|
|
Fixes:
```
Found container virtualization none.
Assertion 'imp.fd >= 0' failed at ../src/test/test-journal-importer.c:43, function test_basic_parsing(). Aborting.
FAIL: test-journal-importer (code: 134)
```
See https://github.com/systemd/systemd/pull/5366#issuecomment-280353804
|
|
|
|
Only one test case is added, but it is enough to check basic sanity of the
code (single-line and binary fields and trusted fields, allocation and freeing).
|
|
No functional change.
|
|
Add a new "install-tests" make target that installs our unit test-*
executables and their test data files into /usr/lib/systemd/tests/.
This is useful for packaging the tests to run them with root privileges
or in CI.
Fixes #5257
|
|
It is useful to package test-* binaries and run them as root under
autopkgtest or manually on particular machines. They currently have a
built-in hardcoded absolute path to their test data, which does not work
when running the test programs from any other path than the original
build directory.
By default, make the tests look for their data in
<test_exe_directory>/testdata/ so that they can be called from any
directory (provided that the corresponding test data is installed
correctly). As we don't have a fixed static path in the build tree (as
build and source tree are independent), set $TEST_DIR with "make check"
to point to <srcdir>/test/, as we previously did with an automake
variable.
|
|
Moe test-resolve's test data from src/resolve/test-data to
test/test-resolve/ to be consistent with test/test-{execute,path}/. This
will make it easier to make the tests relocatable.
|
|
PermissionsStartOnly= (#5309)
ReadOnlyPaths=, ProtectHome=, InaccessiblePaths= and ProtectSystem= are
about restricting access and little more, hence they should be disabled
if PermissionsStartOnly= is used or ExecStart= lines are prefixed with a
"+". Do that.
(Note that we will still create namespaces and stuff, since that's about
a lot more than just permissions. We'll simply disable the effect of
the four options mentioned above, but nothing else mount related.)
This also adds a test for this, to ensure this works as intended.
No documentation updates, as the documentation are already vague enough
to support the new behaviour ("If true, the permission-related execution
options…"). We could clarify this further, but I think we might want to
extend the switches' behaviour a bit more in future, hence leave it at
this for now.
Fixes: #5308
|
|
It's a fairly specialized function. Let's make new files for it and the tests.
|
|
replace test/sys.tar.xz with script to create test/sys/ contents
|
|
IPv6 Neighbor discovery proxy is the IPv6 equivalent to proxy ARP for IPv4.
It is required when ISPs do not unconditional route IPv6 subnets
to their designated target, but expect neighbor solicitation messages
for every address on a link.
A variable IPv6ProxyNDPAddress= is introduced to the [Network] section,
each representing a IPv6 neighbour proxy entry in the neighbour table.
|
|
|
|
comment (#5289)
Sometimes we have comments which don't make sense outside of the systemd
codebase, so let's filter them out from the user-visible files.
Fixes #5286.
|
|
|
|
This adds a generator and a small service that will look for "roothash="
on the kernel command line and use it for setting up a very partition
for the root device.
This provides similar functionality to nspawn's existing --roothash=
switch.
|
|
This adds support for a new kernel command line option "systemd.volatile=" that
provides the same functionality that systemd-nspawn's --volatile= switch
provides, but for host systems (i.e. systems booting with a kernel).
It takes the same parameter and has the same effect.
In order to implement systemd.volatile=yes a new service
systemd-volatile-root.service is introduced that only runs in the initrd and
rearranges the root directory as needed to become a tmpfs instance. Note that
systemd.volatile=state is implemented different: it simply generates a
var.mount unit file that is part of the normal boot and has no effect on the
initrd execution.
The way this is implemented ensures that other explicit configuration for /var
can always override the effect of these options. Specifically, the var.mount
unit is generated in the "late" generator directory, so that it only is in
effect if nothing else overrides it.
|
|
This moves the VolatileMode enum and its helper functions to src/shared/. This
is useful to then reuse them to implement systemd.volatile= in a later commit.
|
|
udev-test.pl shells out systemd-detect-virt, and it really should invoke the
version from the build tree instead of one supplied by the installed system,
hence let's add the builddir to $PATH while building.
|
|
This makes "systemd-run -p MountFlags=shared -t /bin/sh" work, by making
MountFlags= to the list of properties that may be accessed transiently.
|
|
|
|
Udev property ordering
|
|
udev: Add rules for accelerometer orientation quirks
|
|
This commit adds a rules file to extract the properties from hwdb
to set on i2c IIO devices. This is used to set the ACCEL_MOUNT_MATRIX
property on IIO devices, to be consumed by iio-sensor-proxy or
equivalent daemon.
The hwdb file contains documentation on how to write quirks. Note
however that mount information is usually exported in:
- the device-tree for ARM devices
- the ACPI DSDT for Intel-compatible devices
but currently not extracted by the kernel.
Also note that some devices have the framebuffer rotation that changes
between the bootloader and the main system, which might mean that the
accelerometer is then wrongly oriented. This is a missing feature in the
i915 kernel driver: https://bugs.freedesktop.org/show_bug.cgi?id=94894
which needs to be fixed, and won't require quirks.
|
|
Generalize image dissection logic of nspawn, and make it useful for other tools.
|
|
Add new "khash" API and add new sd_id128_get_machine_app_specific() function
|
|
This adds support to the image dissector to deal with encrypted images (only
LUKS). Given that we now have a neatly isolated image dissector codebase, let's
add a new feature to it: support for automatically dealing with encrypted
images. This is then exposed in systemd-dissect and nspawn.
It's pretty basic: only support for passphrase-based encryption.
In order to ensure that "systemd-dissect --mount" results in mount points whose
backing LUKS DM devices are cleaned up automatically we use the DM_DEV_REMOVE
ioctl() directly on the device (in DM_DEFERRED_REMOVE mode). libgcryptsetup at
the moment doesn't provide a proper API for this. Thankfully, the ioctl() API
is pretty easy to use.
|
|
This adds a small tool that may be used to look into OS images, and mount them
to any place. This is mostly a friendlier version of test-dissect-image.c. I am
not sure this should really become a proper command of systemd, hence for now
do not install it into bindir, but simply libexecdir.
This tool is already pretty useful since you can mount image files with it,
honouring the various partitions correctly. I figure this is going to become
more interesting if the dissctor learns luks and verity support.
|
|
This adds two new APIs to systemd:
- loop-util.h is a simple internal API for allocating, setting up and releasing
loopback block devices.
- dissect-image.h is an internal API for taking apart disk images and figuring
out what the purpose of each partition is.
Both APIs are basically refactored versions of similar code in nspawn. This
rework should permit us to reuse this in other places than just nspawn in the
future. Specifically: to implement RootImage= in the service image, similar to
RootDirectory=, but operating on a disk image; to unify the gpt-auto-discovery
generator code with the discovery logic in nspawn; to add new API to machined
for determining the OS version of a disk image (i.e. not just running
containers). This PR does not make any such changes however, it just provides
the new reworked API.
The reworked code is also slightly more powerful than the nspawn original one.
When pointing it to an image or block device with a naked file system (i.e. no
partition table) it will simply make it the root device.
|
|
Since syntax error are non-fatal, downgrade them to warnings.
Use log_syntax to have uniform formatting including the line number.
State machine states like DATA and MATCH are internal, user-facing
messages should use the names from hwdb(7): match, property, record.
Also change "key/value" to "key-value", since there's no alternative
here, both parts must be present.
[/tmp/tmp.KFwEhm74n4/etc/udev/hwdb.d/10-bad.hwdb:2] Property expected, ignoring record with no properties
[/tmp/tmp.KFwEhm74n4/etc/udev/hwdb.d/10-bad.hwdb:5] Property expected, ignoring record with no properties
[/tmp/tmp.KFwEhm74n4/etc/udev/hwdb.d/10-bad.hwdb:9] Property expected, ignoring record with no properties
[/tmp/tmp.KFwEhm74n4/etc/udev/hwdb.d/10-bad.hwdb:11] Key/value pair expected but got " NO_VALUE", ignoring
[/tmp/tmp.KFwEhm74n4/etc/udev/hwdb.d/10-bad.hwdb:18] Property or empty line expected, got "BAD:7:match at wrong place", ignoring record
[/tmp/tmp.KFwEhm74n4/etc/udev/hwdb.d/10-bad.hwdb:22] Property or empty line expected, got "BAD:8:match at wrong place", ignoring record
[/tmp/tmp.KFwEhm74n4/etc/udev/hwdb.d/10-bad.hwdb:23] Match expected but got indented property " Z=z", ignoring line
squash! hwdb: improve syntax error messages
|
|
zsh autocompletion provided by #3062 will be installed when networkd is
enabled.
|
