| Age | Commit message (Collapse) | Author |
|---|
|
When a systemd service running in a container exits with a non-zero
code, it can be useful to terminate the container immediately and get
the exit code back to the host, when systemd-nspawn returns. This was
not possible to do. This patch adds the following to make it possible:
- Add a read-only "ExitCode" property on PID 1's "Manager" bus object.
By default, it is 0 so the behaviour stays the same as previously.
- Add a method "SetExitCode" on the same object. The method fails when
called on baremetal: it is only allowed in containers or in user
session.
- Add support in systemctl to call "systemctl exit 42". It reuses the
existing code for user session.
- Add exit.target and systemd-exit.service to the system instance.
- Change main() to actually call systemd-shutdown to exit() with the
correct value.
- Add verb 'exit' in systemd-shutdown with parameter --exit-code
- Update systemctl manpage.
I used the following to test it:
| $ sudo rkt --debug --insecure-skip-verify run \
| --mds-register=false --local docker://busybox \
| --exec=/bin/chroot -- /proc/1/root \
| systemctl --force exit 42
| ...
| Container rkt-895a0cba-5c66-4fa5-831c-e3f8ddc5810d failed with error code 42.
| $ echo $?
| 42
Fixes https://github.com/systemd/systemd/issues/1290
|
|
These programs should be run manually, typically two instances on a
veth pair to check conflict detection.
Both test programs take the ifname as input, the ACD also takes the
IP address to check, whereas LL (optionally) takes the seed, which
determines the sequence of IP addresses to try.
|
|
This splits the Address Conflict Detection out of the Link Local
library so that we can reuse it for DHCP and static addresses in
the future.
Implements RFC5227.
|
|
We currently process every ARP packet, but we should only care about the ones
relating to our IP address.
Also rename ipv4ll helpers to apr-utils.[ch], and rework the helpers a bit.
|
|
This was used by consoled, which was removed, let's remove this too now.
|
|
|
|
Bump version info and update NEWS for the upcoming release.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.nspawn fiels are simple settings files that may accompany container
images and directories and contain settings otherwise passed on the
nspawn command line. This provides an efficient way to attach execution
data directly to containers.
|
|
Various networkd and dhcp updates
|
|
No functional changes, just moving definitions into separate header
files.
|
|
|
|
|
|
build-sys: allow skipping installation of completions
|
|
Manual merge of https://github.com/systemd/systemd/pull/751.
|
|
Tests are modified to check behaviour with relax and without relax.
New tests are added for hostname_cleanup().
Tests are moved a new file (test-hostname-util) because there's
now a bunch of them.
New parameter is not used anywhere, except in tests, so there should
be no observable change.
|
|
./configure --with-bashcompletiondir=no or --without-bashcompletiondir
now works as expected. Similarly for zsh.
https://github.com/systemd/systemd/issues/533
|
|
Test af-list and arphdr-list.
|
|
Prepare for bug-fix release and bump versions.
|
|
|
|
|
|
|
|
|
|
Bump version to 223 and increase libsystemd libtool-info as we added a
structure-member (without increasing structure size) to sd-bus-vtable.
|
|
This drops the libsystemd-terminal and systemd-consoled code for various
reasons:
* It's been sitting there unfinished for over a year now and won't get
finished any time soon.
* Since its initial creation, several parts need significant rework: The
input handling should be replaced with the now commonly used libinput,
the drm accessors should coordinate the handling of mode-object
hotplugging (including split connectors) with other DRM users, and the
internal library users should be converted to sd-device and friends.
* There is still significant kernel work required before sd-console is
really useful. This includes, but is not limited to, simpledrm and
drmlog.
* The authority daemon is needed before all this code can be used for
real. And this will definitely take a lot more time to get done as
no-one else is currently working on this, but me.
* kdbus maintenance has taken up way more time than I thought and it has
much higher priority. I don't see me spending much time on the
terminal code in the near future.
If anyone intends to hack on this, please feel free to contact me. I'll
gladly help you out with any issues. Once kdbus and authorityd are
finished (whenever that will be..) I'll definitely pick this up again. But
until then, lets reduce compile times and maintenance efforts on this code
and drop it for now.
|
|
This adds test-bus-proxy which should be used to test correct behavior of
systemd-bus-proxyd. The first test that was added is to verify we actually
receive NameAcquired signals for ourselves on bus-connect.
|
|
resolved: add basic NSEC and NSEC3 support
|
|
This target allows to trigger a build of $(BUILT_SOURCES) manually. This
is handy if you tend to use 'make systemd-foobar' to directly build a
single binary. Those do not pull in $(BUILT_SOURCES), unfortunately. See
automake docs for that.
|
|
For when a Hashmap is overkill.
|
|
|
|
This file is mostly GitHub glue and not particularly useful to
end-users. So only add it to the dist tarball but do not install it as
documentation.
|
|
automake: Do not install developer files on end-user systems.
|
|
autogen.sh, .dir-locals.el, .vimrc, .ycm_extra_conf.py, .travis.yml,
.mailmap files are only useful with the source tree, for the
developers. Do not install these files as documentation on the
end-user systems, but keep them distributed with the tarball.
|
|
python-system has moved to it's own repository:
https://github.com/systemd/python-systemd
|
|
|
|
The idea is that after adding a new man page, make update-man-list
will be used to regenerate part of the makefile. So the data already
present in the makefile cannot be used to do that.
Also, renames filter out generated xml files in make-man-rules.py
itself in order to make Makefile.am a bit simpler, and rename files
to dist_files to better reflect new meaning.
|
|
It's moved to the iio-sensor-proxy D-Bus service.
|
|
rules: remove all power management from udev
|
|
The main purpose of this hwdb was to tag touchpads that have the physical
trackstick buttons wired to the touchpad (Lenovo Carbon X1 3rd, Lenovo *50
series). This hwdb is not required on kernels 4.0 and above, the kernel now
re-routes button presses through the trackstick's device node. Userspace does
not need to do anything.
See kernel commit cdd9dc195916ef5644cfac079094c3c1d1616e4c.
This reverts commit 001a247324b44c0e0b8fdba41a6fc66e7465b8b6.
|
|
build-sys: make sure check-api-docs sees each symbol just once
|
|
It is not udev's task to apply any of these setting that way, or
from udev rules files. Things need to be sortet out in the kernel,
or explicit whitelist can possibly be added to the hardware database.
Until that is sorted out, and general agreement, udev is not
willing to maintain any such lists or power management settings
in general.
"Thanks for digging this out! I thought my Kinesis keyboard got broken
and ordered a new one, only to find out that the new one doesn't work
as well. I'm not sure whether we should start collecting a blacklist
of keyboards which don't work with USB autosuspend, or rather a
whitelist? Or revert this wholesale?"
https://github.com/systemd/systemd/issues/340
|
|
Given that some symbols are exposed by multiple libraries (due to the
compatibility libraries), let's ensure "make check-api-docs" only shows
each symbol once by filtering out duplicates.
|
|
This fully synchronizes the content of a "make dist" and a "git archive"
tar ball.
http://lists.freedesktop.org/archives/systemd-devel/2015-June/033214.html
|
|
|
