summaryrefslogtreecommitdiff
path: root/Makefile.am
AgeCommit message (Collapse)Author
2014-05-18network: always take possession of host side of nspawn veth tunnels and do ↵Lennart Poettering
IPv4LL on them
2014-05-18timesyncd: run timesyncd as unpriviliged user "systemd-timesync" (but still ↵Lennart Poettering
with CAP_SYS_TIME)
2014-05-16networkd: manager - read fallback DNS servers from config fileTom Gundersen
We will still use the compiled-in defaults if no DNS entry exists in the config file.
2014-05-15network: fix build failure, missing KMOD_XXX flagsCristian Rodríguez
- Add KMOD_CFLAGS and KMOD_LIBS where appropiate - networkd now requires kmod. make --disable-kmod --enable-networkd to raise an error.
2014-05-15readahead: add test to show fs_on_ssd() resultZbigniew Jędrzejewski-Szmek
2014-05-15sd-bus: introduce sd_bus_slot objects encapsulating callbacks or vtables ↵Lennart Poettering
attached to a bus connection This makes callback behaviour more like sd-event or sd-resolve, and creates proper object for unregistering callbacks. Taking the refernce to the slot is optional. If not taken life time of the slot will be bound to the underlying bus object (or in the case of an async call until the reply has been recieved).
2014-05-13shared: add ring bufferDavid Herrmann
New "struct ring" object that implements a basic ring buffer for arbitrary byte-streams. A new basic runtime test is also added. This will be needed for our pty helpers for systemd-console and friends.
2014-05-12networkd: introduce ipip tunnelSusant Sahani
This patch enables basic ipip tunnel support. It works with kernel module ipip example conf: file: ipip.netdev [NetDev] Name=ipip-tun Kind=ipip MTUBytes=1480 [Tunnel] Local=192.168.223.238 Remote=192.169.224.239 TTL=64 file: ipip.network [Match] Name=em1 [Network] Tunnel=ipip-tun [tomegun: - drop unused variable - take ref when enslaving]
2014-05-08timesyncd: only run when the system has a carrier on a network interfaceTom Gundersen
As the operational state detection in sd-network is still too primitive, timesyncd will likely try to connect a bit early, so the first attempt will fail.
2014-05-06timesyncd: hook up systemd-timesyncd with systemd-timedatedLennart Poettering
Later on we will probably remove support for controlling any other NTP implementations but systemd-timesyncd, but for now, let's keep things generic
2014-05-06timesyncd: read server settings from a configuration fileLennart Poettering
Also, allow compiling in a default server list via a configure command line item.
2014-05-05timesyncd: lookup name server via sd-resolve, support IPv6, react to ↵Lennart Poettering
SIGINT/SITERM
2014-05-05build-sys: move async.[ch] to src/sharedLennart Poettering
So that we can use it at multiple places.
2014-04-29build-sys: fix linking order for networkd-wait-onlyKay Sievers
2014-04-29sd-resolve: rework sd-resolve to be callback based, similar in style to ↵Lennart Poettering
sd-bus and sd-event
2014-04-29networkd: fix distcheckTom Gundersen
2014-04-29timesyncd: add unit and man pageKay Sievers
2014-04-28rename timedate-sntp to timesyncKay Sievers
2014-04-27libnetworkd: add link local testsUmut Tezduyar Lindskog
- Also only allow positive ifindex on both dhcp and ipv4ll [tomegun: the kernel always sets a positive ifindex, but some APIs accept ifindex=0 with various meanings, so we should protect against accidentally passing ifindex=0 along.]
2014-04-26networkd-wait-online: drop config file and add commandline options insteadTom Gundersen
2014-04-24errno: make sure to handle the 3 errnos that are aliases for others properlyLennart Poettering
2014-04-24networkd-wait-online: improve interoptability and enable by defaultTom Gundersen
To make sure we don't delay boot on systems where (some) network links are managed by someone else we don't block if something else has successfully brought up a link. We will still block until all links we are aware of that are managed by networkd have been configured, but if no such links exist, and someone else have configured a link sufficiently that it has a carrier, it may be that the link is ready so we should no longer block. Note that in all likelyhood the link is not ready (no addresses/routes configured), so whatever network managment daemon configured it should provide a similar wait-online service to block network-online.target until it is ready. The aim is to block as long as we know networking is not fully configured, but no longer. This will allow systemd-networkd-wait-online.service to be enabled on any system, even if we don't know whether networkd is the main/only network manager. Even in the case networking is fully configured by networkd, the default behavior may not be sufficient: if two links need to be configured, but the first is fully configured before the second one appears we will assume the network is up. To work around that, we allow specifying specific devices to wait for before considering the network up. This unit is enabled by default, just like systemd-networkd, but will only be pulled in if anyone pulls in network-online.target.
2014-04-22remove bus-driverd, the interface is now handled natively by bus-proxydKay Sievers
2014-04-19nss-myhostname: port to sd-rtnlTom Gundersen
2014-04-17build-sys: do not try to build test-rtnl-manual w/o kmodZbigniew Jędrzejewski-Szmek
2014-04-17build-sys: add libkmod flags for test_rtnl_manualŁukasz Stelmach
2014-04-13udev: remove seqnum API and all assumptions about seqnumsKay Sievers
The way the kernel namespaces have been implemented breaks assumptions udev made regarding uevent sequence numbers. Creating devices in a namespace "steals" uevents and its sequence numbers from the host. It confuses the "udevadmin settle" logic, which might block until util a timeout is reached, even when no uevent is pending. Remove any assumptions about sequence numbers and deprecate libudev's API exposing these numbers; none of that can reliably be used anymore when namespaces are involved.
2014-04-10bus: update kdbus.hKay Sievers
2014-04-10cgls: fix running with -M optionLukas Nykryn
systemd-machined doesn't store cgroup path in a state file anymore. Let's figure it out from the scope.
2014-04-02build-sys: remove no longer needed user/org.freedesktop.DBus.busnameKay Sievers
2014-03-28sd-rtnl: rework rtnl type systemTom Gundersen
Use a static table with all the typing information, rather than repeated switch statements. This should make it a lot simpler to add new types. We need to keep all the type info to be able to create containers without exposing their implementation details to the users of the library. As a freebee we verify the types of appended/read attributes. The API is extended to nicely deal with unions of container types.
2014-03-26build-sys: update "linkcheck"Kay Sievers
<kay> ssuominen: and drop --no-as-needed from the linkcheck? <kay> ssuominen: i expect it all triggers without the gc-sections thing alone <ssuominen> if the intention is to make it strict as possible, to catch undefined references caused by missing -lfoo in linker line, then LDFLAGS="-Wl,-fuse-ld=gold -Wl,--as-needed -Wl,--no-gc-sections"
2014-03-26build-sys: rename "check-broken" to "linkcheck"Kay Sievers
2014-03-26build-sys: split "make upload" and "make tango"Kay Sievers
2014-03-26bus: provide org.freedesktop.systemd1.busname for systemd --userKay Sievers
2014-03-26build-sys: disable test-cgroup-mask, it mangles valid user data in ↵Kay Sievers
/run/user/$UID/ $ ./test-cgroup-mask ... rmdir("/run/user/2702/systemd/generator") = 0 open("/run/user/2702/systemd/generator.late", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_NOFOLLOW|O_NOATIME|O_CLOEXEC) = 5 fstat(5, {st_mode=S_IFDIR|0755, st_size=3200, ...}) = 0 fcntl(5, F_GETFL) = 0x78800 (flags O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_NOFOLLOW|O_NOATIME) fcntl(5, F_SETFD, FD_CLOEXEC) = 0 getdents(5, /* 160 entries */, 32768) = 10072 unlinkat(5, "org.gnome.Weather.Application.busname", 0) = 0 unlinkat(5, "dbus-org.gnome.Weather.Application.service", 0) = 0 ...
2014-03-26build-sys: add "make check-broken" to find limited-toolchain link errorsKay Sievers
2014-03-25build-sys: fix library link ordersystemd/v212Kay Sievers
2014-03-25build-sys: split-off internal libsystemd-resolveKay Sievers
2014-03-25build-sys: prepare 212Lennart Poettering
2014-03-25sd-rtnl: add support for tunnel attributesSusant Sahani
Added support for tunneling netlink attrributes (ipip, gre, sit). These works with kernel module ipip, gre and sit . The test cases are moved to a separate file and manual test as well because they require respective kernel modules as well.
2014-03-24core: remove tcpwrap supportLennart Poettering
tcpwrap is legacy code, that is barely maintained upstream. It's APIs are awful, and the feature set it exposes (such as DNS and IDENT access control) questionnable. We should not support this natively in systemd. Hence, let's remove the code. If people want to continue making use of this, they can do so by plugging in "tcpd" for the processes they start. With that scheme things are as well or badly supported as they were from traditional inetd, hence no functionality is really lost.
2014-03-21libsystemd-network: move network-utils from src/sharedTom Gundersen
This does not belong in shared as it is mostly a detail of our networking subsystem. Moreover, now we can use libudev here, which will simplify things.
2014-03-19busname: introduce Activating directiveDaniel Mack
Add a new config 'Activating' directive which denotes whether a busname is actually registered on the bus. It defaults to 'yes'. If set to 'no', the .busname unit only uploads policy, which will remain active as long as the unit is running.
2014-03-17build-sys: move sd-login src/login → src/libsystemd/sd-loginLennart Poettering
After all, it is ultimately linked to libsystems.so anyway, thus belongs there and shares very little with the rest of logind, hence let's move this away.
2014-03-17journal-remote: HTTP(s) supportZbigniew Jędrzejewski-Szmek
The whole tool is made dependent on µhttpd availability. It should be easy to make the µhttpd parts conditional, but since transfer over HTTP seems to be the primary use case, currently this is not done. Current implementation uses nested epoll loops: sd-event is used for the external event loop, and µhttpd uses epoll in its own loop. Unfortunately µhttpd does not expose enough information to add the descriptors it uses to the external event loop. This means that starvation of other events is possible, if one of the inner µhttpd loops is constantly busy. This means that µhttpd servers should not be mixed with other sources. The TLS authentication parts haven't been really tested properly, and should not be take too seriously.
2014-03-17journal-remote: tool to receive messages over the networkZbigniew Jędrzejewski-Szmek
2014-03-17journal-gatewayd: log to journal from gnutlsZbigniew Jędrzejewski-Szmek
Prefix "gnutls: " is added. Some semi-random mapping of gnutls levels to syslog levels is done, but since gnutls levels seem to be used rather loosely, most end up as debug.
2014-03-15zsh completion: Install _sd_machines with _machinectlWieland Hoffmann
_machinectl uses _sd_machines to provide a list of all available machines.
2014-03-14journald: add support for wall forwardingSebastian Thorarensen
This will let journald forward logs as messages sent to all logged in users (like wall). Two options are added: * ForwardToWall (default yes) * MaxLevelWall (default emerg) 'ForwardToWall' is overridable by kernel command line option 'systemd.journald.forward_to_wall'. This is used to emulate the traditional syslogd behaviour of sending emergency messages to all logged in users.