summaryrefslogtreecommitdiff
path: root/Makefile.am
AgeCommit message (Collapse)Author
2013-07-26build-sys: use pkg-config for python compilation flagsZbigniew Jędrzejewski-Szmek
Python 2.7, and 3.2 and higher support querying compilation flags through pkg-config. This makes python support follow rules similar to various other optional compilation-time libraries. New flags are called PYTHON_DEVEL_CFLAGS and PYTHON_DEVEL_LIBS, because PYTHON (without _DEVEL), is already used for the python binary name, and things would be confusing if the same prefix was used for two things. configure has --disable-python-devel to disable python modules. One advantage is that CFLAGS for modules gets smaller: - -I/usr/include/python3.3m -I/usr/include/python3.3m -Wno-unused-result -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_GNU_SOURCE -fPIC -fwrapv + -I/usr/include/python3.3m as does LIBS: - -lpthread -ldl -lutil -lm -lpython3.3m + -lpython3.3m Support for Python 2.6 is removed, but can be easily restored by using PYTHON_DEVEL_CFLAGS="$(python2.6-config --cflags)", etc., as ./configure parameters. https://bugs.freedesktop.org/show_bug.cgi?id=57800
2013-07-26shared: split mkdir_*() and mkdir_*_label() from each otherKay Sievers
Avoid pulling-in selinux for tools which just create directories but not need to fix the selinux label.
2013-07-26shell-completion: add kernel-installKay Sievers
2013-07-23remove systemd-timestamp from sourcesDave Reisner
No sense in keeping this around if support for reading RD_TIMESTAMP has been removed.
2013-07-23build-sys: prepare 206systemd/v206Lennart Poettering
2013-07-19make: Automake is complaining about .PRECIOUS being redefinedHolger Hans Peter Freyther
Yesterday I added test-suite.log as dependency to the .PRECIOUS target. Automake is warning about this target being redefined and from what I see there is no way I can stop the warning but I can add the %MAKEFILE% as dependency. automake warning: Makefile.am:35: warning: user target '.PRECIOUS' defined here ... /usr/share/automake-1.13/am/configure.am: ... overrides Automake target '.PRECIOUS' defined here [zj: s/%MAKEFILE%/Makefile/ because %MAKEFILE% wasn't actually substituted properly.]
2013-07-18test: Keep the test-suite.log around in case of a test failureHolger Hans Peter Freyther
The addition of .DELETE_ON_ERROR will lead to the removal of the test-suite.log in case of a test failure. Mark the rule as PRECIOUS to keep that file around.
2013-07-16switch from udev keymaps to hwdbKay Sievers
2013-07-15build-sys: make generated man pages part of the distribution tarballZbigniew Jędrzejewski-Szmek
They were removed by mistake, and since we ship .html files, we certainly should ship man pages. https://bugs.freedesktop.org/show_bug.cgi?id=61753
2013-07-15build-sys: discover the path to kexec during build timeZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=55248
2013-07-13Add test coverage and generate report with lcovThomas H.P. Andersen
Enable coverage with --enable-coverage. "make coverage" will create the report locally, "make coverage-sync" will upload the report to http://www.freedesktop.org/software/systemd/coverage/. Requires lcov version 1.10 to handle naming in systemd and to use the --no-external option. [zj: make the coverage at least generate something with separate build dir, simplify rules a bit: all errors are mine. ]
2013-07-12static-nodes: don't hardcode path to mkdirTom Gundersen
2013-07-10udev: add builtin 'keyboard' to manage key mappingsKay Sievers
2013-07-08static-nodes: move creation of static nodes from udevd to tmpfilesTom Gundersen
As of kmod v14, it is possible to export the static node information from /lib/modules/`uname -r`/modules.devname in tmpfiles.d(5) format. Use this functionality to let systemd-tmpfilesd create the static device nodes at boot, and drop the functionality from systemd-udevd. As an effect of this we can move from systemd-udevd to systemd-tmpfiles-setup-dev: * the conditional CAP_MKNOD (replaced by checking if /sys is mounted rw) * ordering before local-fs-pre.target (see 89d09e1b5c65a2d97840f682e0932c8bb499f166)
2013-07-05tests: add tests for string lookup tablesZbigniew Jędrzejewski-Szmek
The tests check if the tables have entries for all values in the enum, and that the entries are unique.
2013-07-03build-sys: bump/correct library versionsLennart Poettering
2013-07-02build-sys: two files were missing in distcheckZbigniew Jędrzejewski-Szmek
One is a typo, the other one doesn't actually exist yet.
2013-07-02build-sys: work around automake issue with files with a leading '-'Kay Sievers
We should probably work around it, until it is sorted out. http://debbugs.gnu.org/cgi/bugreport.cgi?bug=14728
2013-07-02build-sys: install rpm macros file to /usr/lib/rpm/macros.dFedora systemd team
RPM macros are moved from /etc to /usr, in the sprit of moving in the direction of empty /etc. RPM gained support for the new directory recently, in v. 4.10.90: https://bugzilla.redhat.com/show_bug.cgi?id=846679.
2013-07-02machined: split out machine registration stuff from logindLennart Poettering
Embedded folks don't need the machine registration stuff, hence it's nice to make this optional. Also, I'd expect that machinectl will grow additional commands quickly, for example to join existing containers and suchlike, hence it's better keeping that separate from loginctl.
2013-07-01keymap: remove non-existing driver string matchesKay Sievers
There are no such strings for input devices in the kernel.
2013-07-01core: add new "scope" unit type for making a unit of pre-existing processesLennart Poettering
"Scope" units are very much like service units, however with the difference that they are created from pre-existing processes, rather than processes that systemd itself forks off. This means they are generated programmatically via the bus API as transient units rather than from static configuration read from disk. Also, they do not provide execution-time parameters, as at the time systemd adds the processes to the scope unit they already exist and the parameters cannot be applied anymore. The primary benefit of this new unit type is to create arbitrary cgroups for worker-processes forked off an existing service. This commit also adds a a new mode to "systemd-run" to run the specified processes in a scope rather then a transient service.
2013-06-29build-sys: "link" libsystemd-id128.so with libsystemd-labelZbigniew Jędrzejewski-Szmek
Fixed build on debian wheezy: ./.libs/libudev.so: undefined reference to `cg_create' Appears to have no influence on the resulting binaries and libraries. Cf. b5fafdf63f.
2013-06-28keymap: Add Samsung Series 3장동준
Signed-off-by: Martin Pitt <martinpitt@gnome.org>
2013-06-28core: add transient unitsLennart Poettering
Transient units can be created via the bus API. They are configured via the method call parameters rather than on-disk files. They are subject to normal GC. Transient units currently may only be created for services (however, we will extend this), and currently only ExecStart= and the cgroup parameters can be configured (also to be extended). Transient units require a unique name, that previously had no configuration file on disk. A tool systemd-run is added that makes use of this functionality to run arbitrary command lines as transient services: $ systemd-run /bin/ping www.heise.de Will cause systemd to create a new transient service and run ping in it.
2013-06-27test: Add list testcaseJan Janssen
2013-06-27core: general cgroup reworkLennart Poettering
Replace the very generic cgroup hookup with a much simpler one. With this change only the high-level cgroup settings remain, the ability to set arbitrary cgroup attributes is removed, so is support for adding units to arbitrary cgroup controllers or setting arbitrary paths for them (especially paths that are different for the various controllers). This also introduces a new -.slice root slice, that is the parent of system.slice and friends. This enables easy admin configuration of root-level cgrouo properties. This replaces DeviceDeny= by DevicePolicy=, and implicitly adds in /dev/null, /dev/zero and friends if DeviceAllow= is used (unless this is turned off by DevicePolicy=).
2013-06-20build-sys: make intltool and distcheck happyZbigniew Jędrzejewski-Szmek
2013-06-20logind: add infrastructure to keep track of machines, and move to slicesLennart Poettering
- This changes all logind cgroup objects to use slice objects rather than fixed croup locations. - logind can now collect minimal information about running VMs/containers. As fixed cgroup locations can no longer be used we need an entity that keeps track of machine cgroups in whatever slice they might be located. Since logind already keeps track of users, sessions and seats this is a trivial addition. - nspawn will now register with logind and pass various bits of metadata along. A new option "--slice=" has been added to place the container in a specific slice. - loginctl gained commands to list, introspect and terminate machines. - user.slice and machine.slice will now be pulled in by logind.service, since only logind.service requires this slice.
2013-06-18units: add default units for system.slice, user.slice, machine.sliceLennart Poettering
2013-06-17core: add new .slice unit type for partitioning systemsLennart Poettering
In order to prepare for the kernel cgroup rework, let's introduce a new unit type to systemd, the "slice". Slices can be arranged in a tree and are useful to partition resources freely and hierarchally by the user. Each service unit can now be assigned to one of these slices, and later on login users and machines may too. Slices translate pretty directly to the cgroup hierarchy, and the various objects can be assigned to any of the slices in the tree.
2013-06-12build-sys: add 'man' targetZbigniew Jędrzejewski-Szmek
Useful when working just on the documentation.
2013-06-12build-sys: don't install quotaon.service twiceRoss Burton
quotaon.service is already installed through dist_systemunit_DATA, so it doesn't need to be added to nodist_systemunit_DATA. Installing the same file twice results in a race condition where the install process can fail. https://bugs.freedesktop.org/show_bug.cgi?id=65659 [zj: actually remove quotaon.service from the other list.]
2013-06-10tests: add testcase for skipping-entries-on-direction-change-bugMarius Vollmer
This test case failed until a3e6f050de8. Taken from https://bugs.freedesktop.org/show_bug.cgi?id=65255.
2013-06-03Makefile.am: merge conditionalsTom Gundersen
Merge all ENABLE_TMPFILES conditionals into one, and merge two ENABLE_EFI conditionals. Also make sure the .in files are always distributed.
2013-06-02build-sys: option to disable tmpfilesUmut Tezduyar
2013-05-24keymap: Add Logitech USB (iTouch)Martin Pitt
https://launchpad.net/bugs/1152377
2013-05-22bus: add benchmark tool to determine the right threshold for copying vs. memfdLennart Poettering
2013-05-20bus: add a more comprehensive test for the bloom filter logicLennart Poettering
2013-05-17bus: add minimal locking around the memfd cacheLennart Poettering
We want to allow clients to process an sd_bus_message on a different thread than it was received on. Since unreffing a bus message might readd some of its memfds to the memfd cache add some minimal locking around the cache.
2013-05-16bus: make bus ref counting atomicLennart Poettering
This is preparation to allow sd_bus_message obejcts to be processed in a different thread from their originating sd_bus object.
2013-05-16utmp: turn systemd-update-utmp-shutdown.service into a normal runtime serviceLennart Poettering
With this change systemd-update-utmp-shutdown.service is replaced by systemd-update-utmp.service which is started at boot and stays around until shutdown. This allows us to properly order the unit against both /var/log and auditd. https://bugzilla.redhat.com/show_bug.cgi?id=853104 https://bugs.freedesktop.org/show_bug.cgi?id=64365
2013-05-15units: rework systemd-random-seed-{load,save}.service to be a single serviceLennart Poettering
That way ordering it with MountsRequiredFor= works properly, as this no longer results in mount units start requests to be added to the shutdown transaction that conflict with stop requests for the same unit.
2013-05-15bus: add support for adding memfds into message payloadLennart Poettering
2013-05-10bus: add new API for kdbus memfd functionalityLennart Poettering
2013-05-09build-sys: add convinience 'make python-shell'Zbigniew Jędrzejewski-Szmek
This will launch $(PYTHON) with $LD_LIBRARY_PATH and $PYTHONPATH as ./configure-d and DESTDIR-ed. Use as: make install DESTDIR=/var/tmp/inst python-shell
2013-05-09build-sys: prepare 204systemd/v204Lennart Poettering
2013-05-08systemd-python: add wrappers for easy functions in sd-loginZbigniew Jędrzejewski-Szmek
sd_get_uids, sd_get_seats, sd_get_sessions, and sd_get_machine_names.
2013-05-07build-sys: properly mkdir for GENERAL_ALIASESZbigniew Jędrzejewski-Szmek
Previous commit (20d408766) was broken. The problem is not connected to DESTDIR being set or not, but to the fact that targets in $GENERAL_ALIASES have directory components, so mkdir -p wasn't recursing deep enough.
2013-05-07build-sys: properly mkdir with DESTDIR setZbigniew Jędrzejewski-Szmek
grawity> ln: failed to create symbolic link ‘/home/grawity/pkg/aur/systemd-git/pkg/systemd//etc/systemd/system/multi-user.target.wants/remote-fs.target’: No such file or directory
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-29 21:22:11 +0000