| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Let's add a generic parser for VLAN ids, which should become handy as
preparation for PR #3428. Let's also make sure we use uint16_t for the vlan ID
type everywhere, and that validity checks are already applied at the time of
parsing, and not only whne we about to prepare a netdev.
Also, establish a common definition VLANID_INVALID we can use for
non-initialized VLAN id fields.
|
|
This reworks sd-ndisc and networkd substantially to support IPv6 RA much more
comprehensively. Since the API is extended quite a bit networkd has been ported
over too, and the patch is not as straight-forward as one could wish. The
rework includes:
- Support for DNSSL, RDNSS and RA routing options in sd-ndisc and networkd. Two
new configuration options have been added to networkd to make this
configurable.
- sd-ndisc now exposes an sd_ndisc_router object that encapsulates a full RA
message, and has direct, friendly acessor functions for the singleton RA
properties, as well as an iterative interface to iterate through known and
unsupported options. The router object may either be retrieved from the wire,
or generated from raw data. In many ways the sd-ndisc API now matches the
sd-lldp API, except that no implicit database of seen data is kept. (Note
that sd-ndisc actually had a half-written, but unused implementaiton of such
a store, which is removed now.)
- sd-ndisc will now collect the reception timestamps of RA, which is useful to
make sd_ndisc_router fully descriptive of what it covers.
Fixes: #1079
|
|
The current raw_clone function takes two arguments, the cloning flags and
a pointer to the stack for the cloned child. The raw cloning without
passing a "thread main" function does not make sense if a new stack is
specified, as it returns in both the parent and the child, which will fail
in the child as the stack is virgin. All uses of raw_clone indeed pass NULL
for the stack pointer which indicates that both processes should share the
stack address (so you better don't pass CLONE_VM).
This commit refactors the code to not require the caller to pass the stack
address, as NULL is the only sensible option. It also adds the magic code
needed to make raw_clone work on sparc64, which does not return 0 in %o0
for the child, but indicates the child process by setting %o1 to non-zero.
This refactoring is not plain aesthetic, because non-NULL stack addresses
need to get mangled before being passed to the clone syscall (you have to
apply STACK_BIAS), whereas NULL must not be mangled. Implementing the
conditional mangling of the stack address would needlessly complicate the
code.
raw_clone is moved to a separete header, because the burden of including
the assert machinery and sched.h shouldn't be applied to every user of
missing_syscalls.h
|
|
Split seccomp into nspawn-seccomp.[ch]. Currently there are no changes,
but this will make it easy in the future to share or use the seccomp logic
from systemd core.
|
|
|
|
|
|
Add a synchronization point so that custom initramfs units can run
after the root device becomes available, before it is fsck'd and
mounted.
This is useful for custom initramfs units that may modify the
root disk partition table, where the root device is not known in
advance (it's dynamically selected by the generators).
|
|
--network-zone=
This way, they "just work", similar to --network-veth behaves, as long as
networkd is enabled and running on all involved nodes.
|
|
|
|
Rework DUID setting
|
|
|
|
|
|
machined: make "clone" asynchronous, and support copy-based fall-back
|
|
Cloning an image can be slow, if the image is not on a btrfs subvolume, hence
let's make sure we do this asynchronously in a child process, so that machined
isn't blocked as long as we process the client request.
This adds a new, generic "Operation" object to machined, that is used to track
these kind of background processes.
This is inspired by the MachineOperation object that already exists to make
copy operations asynchronous. A later patch will rework the MachineOperation
logic to use the generic Operation instead.
|
|
|
|
Follow-up for 91f9f8f1bae and 4f4d6ee4be1c
|
|
This adds a new --private-userns-chown switch that may be used in combination
with --private-userns. If it is passed a recursive chmod() operation is run on
the OS tree, fixing all file owner UID/GIDs to the right ranges. This should
make user namespacing pretty workable, as the OS trees don't need to be
prepared manually anymore.
|
|
After all, the enum definition is in output-mode.h
|
|
This adds a new GetProcesses() bus call to the Unit object which returns an
array consisting of all PIDs, their process names, as well as their full cgroup
paths. This is then used by "systemctl status" to show the per-unit process
tree.
This has the benefit that the client-side no longer needs to access the
cgroupfs directly to show the process tree of a unit. Instead, it now uses this
new API, which means it also works if -H or -M are used correctly, as the
information from the specific host is used, and not the one from the local
system.
Fixes: #2945
|
|
Kill user session scope by default
|
|
|
|
Fixes #3035
|
|
We don#t really support systems where XDG_RUNTIME_DIR is not supported for
systemd --user. Hence, let's always set our own XDG_RUNTIME_DIR for tests that
involve systemd --user, so that we know it is set, and that it doesn't polute
the user's actual runtime dir.
|
|
it's unused, and should we need it one day we can always resurrect it from git
history.
|
|
Previously, libxkbcommon was a compile-time option. When enabled the localed
binary would strictly depend on it, thus pulling in libxkbcommon and its
dependencies, which are non-trivial in size.
With this change we dlopen() libxkbcommon when it is available instead. If the
library is available behaviour is as before. However, if it isn't the system is
considered "headless", i.e. without local hardware and all attempts to set the
local keyboard configuration will be refused.
This is useful for general-purpose distributions which want to support
"headless" (such as container systems) and "full" systems with the same build.
|
|
nspawn: always setup machine id (v3)
|
|
We check /etc/machine-id of the container and if it is already populated
we use value from there, possibly ignoring value of --uuid option from
the command line. When dealing with R/O image we setup transient machine
id.
Once we determined machine id of the container, we use this value for
registration with systemd-machined and we also export it via
container_uuid environment variable.
As registration with systemd-machined is done by the main nspawn process
we communicate container machine id established by setup_machine_id from
outer child to the main process by unix domain socket. Similarly to PID
of inner child.
|
|
Fixes:
$ ls -ld test/sys
drwxr-xr-x. 12 vagrant vagrant 4096 Jan 6 2012 test/sys
$ git pull
Updating d4337c1..710a885
Fast-forward
...
test/sys.tar.xz | Bin 261380 -> 165116 bytes
test/udev-test.pl | 67 ++++++++++++-----
$ sudo make check TESTS=test/udev-test.pl
...
FAIL: test/udev-test.pl
$ rm -r test/sys
$ make test/sys
$ sudo make check TESTS=test/udev-test.pl
...
PASS: test/udev-test.pl
|
|
We don't want to actually install it anywhere, because it
is only usable copied or %included directly into a spec file,
and must be available before %prep is run. But still, it's
useful to generate it automatically so it's easier to copy
and it doesn't go stale.
|
|
build-sys: move test-nss to manual_tests
|
|
|
|
Add a test for nss modules and some related fixes
|
|
nss-dns is also "tested". It should be almost always available,
and provides a reference for comparison.
|
|
|
|
|
|
lldp: move public macros to sd-lldp.h and namespace them
|
|
- Move gcrypt.h include inside grcrypt-util.h.
- Allow gcrypt-util.[ch] to be compiled even without gcrypt.
This allows the logic in files using gcrypt to be simplified.
- Fix compilation of systemd-resolve without gcrypt.
systemd-resolved already supported that.
Fixes #2711.
|
|
lldp.h contains definitions of LLDP types, subtypes and capabilities which
should be exposed in public headers. Get rid of the file and move those
definitions to sd-lldp.h with the SD_ prefix.
|
|
Add some simple tests for env_value_is_valid and env_assignment_is_valid
|
|
|
|
|
|
core: set NoNewPrivileges for seccomp if we don't have CAP_SYS_ADMIN
|
|
journal-upload doesn't really need microhttpd to run.
Without the dependency, we can cross compile systemd
without microhttpd and get the uploader part of the
remote logging.
Change-Id: I28dfa5ad2aae94e50de1d32713e1827623c3fd1d
|
|
Use sendfile smarter
|
|
We have a bunch of syscall wrapper definitions and it's easier to
see that they follow the same pattern if they are not interspersed
with other defines.
Change the wrappers to be uniform:
- if __NR_XXX is not defined, do not bother to call the syscall,
and return -1/ENOSYS immediately.
- do not check __NR_XXX defines if we detect the symbol as defined,
since we don't need them anyway
- reindent stuff for readability
New file basic/missing_syscall.h is included at the end of missing.h
because it might make use of some of the definitions in missing.h.
|
|
|
|
DHCP DUID and IAID configurability
|
|
|
|
tests: move out unrelated tests from test-util to their own file
|
