summaryrefslogtreecommitdiff
path: root/Makefile.am
AgeCommit message (Collapse)Author
2013-12-16build-sys: add cppcheck targetLennart Poettering
This uses --enable=all mode. Should be taken with a grain of salt though. While many recommendations make sense we should probably keep "int r" always on function scope, and many of the portability warnings really don't matter to us because we only care for Linux/glibc.
2013-12-13bus: install systemd-bus-proxyd unit files for compatibility with dbus1Lennart Poettering
2013-12-12build-sys: use internal library for dhcp client testsZbigniew Jędrzejewski-Szmek
Also clean up AM_CFLAGS in a few places.
2013-12-12build: Add dependency on libsystemd-bus needed for main loopPatrik Flykt
2013-12-12dhcp: Add test for discover DHCP packet creationPatrik Flykt
Set a fake MAC address and emulate raw packet sending. When the buffer containing the Discover message is received, check selected IP and UDP headers and compute IP header and UDP message checksums. Also send the DHCP message for option parsing and expect a successful outcome.
2013-12-12build: Add libsystemd-dhcpPatrik Flykt
2013-12-12build: Add DHCP option testPatrik Flykt
2013-12-12build: Add initial build supportPatrik Flykt
The client test program is the only one to be built so far.
2013-12-11journald: port to sd-event and enable watchdog supportLennart Poettering
2013-12-11event: hook up sd-event with the service watchdog logicLennart Poettering
Adds a new call sd_event_set_watchdog() that can be used to hook up the event loop with the watchdog supervision logic of systemd. If enabled and $WATCHDOG_USEC is set the event loop will ping the invoking systemd daemon right after coming back from epoll_wait() but not more often than $WATCHDOG_USEC/4. The epoll_wait() will sleep no longer than $WATCHDOG_USEC/4*3, to make sure the service manager is called in time. This means that setting WatchdogSec= in a .service file and calling sd_event_set_watchdog() in your daemon is enough to hook it up with the watchdog logic.
2013-12-10fix scan-build issuesThomas Hindoe Paaboel Andersen
The static analyzer scan-build had a few issues with analysing parts of systemd. gpt-auto-generator.c: scan-build could not find blkid.h. Whether it should be blkid.h or blkid/blkid.h seems to depend on the version used. We already use blkid/blkid.h in udev-builtin-blkid.c so it seems safe to use that here too. Makefile.am: Moved some -D's from CFLAGS to CPPFLAGS. I also simplified them a bit and got rid of a left over DBUS_CFLAGS. test-cgroup-mask.c/test-sched-prio.c A variable was added to store the replaced TEST_DIR. When wrapped in an assert_se TEST_DIR was not replaced in the logged error. While not an issue introduced in this patch we might as well fix it up while we are here.
2013-12-09bus: demarshal gvariantLennart Poettering
2013-12-05bus: start maintaining a list of difference between kdbus/dbus1Lennart Poettering
2013-12-05bus: add support for serializing to gvariantLennart Poettering
(deserialization is still missing, hence this is not hooked up to kdbus)
2013-12-03bus: internalize a lot of protocol definitionsLennart Poettering
We shouldn export what isn't necessary or useful to clients, so let's add the protocol definitions we only need internally into a private header.
2013-12-03units: ship busname units for the bus activated services we shipLennart Poettering
2013-12-02catalog: rename files to specify language in the filenameZbigniew Jędrzejewski-Szmek
2013-12-03units: create busnames.target for user sessions tooLennart Poettering
2013-12-03units: install busnames.target by defaultLennart Poettering
2013-12-03bus: add generator that turns old dbus1 activation files into .busname + ↵Lennart Poettering
.service units
2013-12-02bus: add .busname unit type to implement kdbus-style bus activationLennart Poettering
2013-12-01build-sys: allow building systemctl with --disable-logindMarcel Holtmann
When logind is disabled, do not attempt to link against the non-existing libsystemd-login-internal.la library.
2013-12-01catalog,po: add Italian translationDaniele Medri
2013-11-30build-sys: no longer rebuild various bits and pieces such as man pages each ↵Lennart Poettering
time the Makefile changes We don't do this for .c files either, even they are also influence quite a bit by makefile settings. Given that XSLT is a lot slower then the rest of the build let's make our build a bit faster if people end up touching the Makefile.
2013-11-29rename stdio-bridge to bus-proxydKay Sievers
2013-11-28build-sys: make multi-seat-x optionalZbigniew Jędrzejewski-Szmek
At some point it should become disabled by default. http://lists.freedesktop.org/archives/systemd-devel/2013-November/014869.html
2013-11-28bus: add new sd_bus_creds object to encapsulate process credentialsLennart Poettering
This way we can unify handling of credentials that are attached to messages, or can be queried for bus name owners or connection peers. This also adds the ability to extend incomplete credential information with data from /proc, Also, provide a convenience call that will automatically determine the most appropriate credential object for an incoming message, by using the the attached information if possible, the sending name information if available and otherwise the peer's credentials.
2013-11-28catalog,po: add Russian translationSergey Ptashnick
2013-11-27journal: add a test case for flushing messages out of a series of journal ↵Lennart Poettering
files into a single new one
2013-11-26networkd: add bridge supportTom Gundersen
A bridge is specified in a .netdev file with a section [Bridge] and at least the entry Name=. A link may be joined to a bridge if the .network applied to it has a Bridge= entry giving the name of the bridge in its [Network] section. We eagerly create all bridges on startup, and links are added to bridges as soon as they both appear.
2013-11-23networkd: fix buildTom Gundersen
Forgot to 'git add'...
2013-11-23cgroups: Fix test service inclusion in MakefileDavid Strauss
2013-11-22build-sys: move more files from core/ to share/ that are generic enoughLennart Poettering
2013-11-22bus: rework sd_bus_error APIsLennart Poettering
All calls that set a sd_bus_error structure will now return the same error converted to a negative errno. This may be used as syntactic sugar to return from a function and setting a bus_error structure in one go. Also, translate all Linux Exyz (EIO, EINVAL, EUCLEAN, EPIPE, ...) automatically into counterparts in the (new) "Posix.Error." namespace. If we fail to allocate memory for the components of a sd_bus_error automatically reset it to an OOM error which we always can write.
2013-11-22cgroups: Cache controller masks and optimize queues.David Strauss
2013-11-20core: convert PID 1 to libsystemd-busLennart Poettering
This patch converts PID 1 to libsystemd-bus and thus drops the dependency on libdbus. The only remaining code using libdbus is a test case that validates our bus marshalling against libdbus' marshalling, and this dependency can be turned off. This patch also adds a couple of things to libsystem-bus, that are necessary to make the port work: - Synthesizing of "Disconnected" messages when bus connections are severed. - Support for attaching multiple vtables for the same interface on the same path. This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus calls which used an inappropriate signature. As a side effect we will now generate PropertiesChanged messages which carry property contents, rather than just invalidation information.
2013-11-17catalog: add French translationSylvain Plantefeve
2013-11-15random-seed: improve debugging messages a bitZbigniew Jędrzejewski-Szmek
2013-11-15build: use printf to generate symbol testsDave Reisner
echo is basically unportable, so use printf instead.
2013-11-15build-sys: don't mix dynamic and static libsTom Gundersen
2013-11-14rtnl: add event loop integrationTom Gundersen
2013-11-14loopback-setup: move to rtnlTom Gundersen
This should be equivalent to the old behavior.
2013-11-13zsh-completion: add bootctlMarko Myllynen
2013-11-13libsystemd-id128: statically include sd_listen_fds()Kay Sievers
2013-11-12build-sys: parallelize 'exported' targetZbigniew Jędrzejewski-Szmek
2013-11-12build-sys: make public libraries depend on .sym filesZbigniew Jędrzejewski-Szmek
This way modyfing the .sym file causes a rebuild.
2013-11-12build-sys: add a link test for exported symbolsZbigniew Jędrzejewski-Szmek
I know that this is a pretty big net to catch some small fish, but we *do* regularly forget to properly export symbols that were supposed to be exported. This time sd_bus_get_current and some renamed symbols are caught.
2013-11-12build-sys: Add --disable-networkd optionColin Walters
For GNOME (Continuous), we are unlikely to require or want systemd-networkd in the near term future; all of the tools and code are targeting NetworkManager. The long term story is still an open question of course, but for now, there's no reason for gnome-continuous to build or ship this.
2013-11-12bus: beautify bus_message_dump() output a bitLennart Poettering
2013-11-10build-sys: subtract list of exported symbols from "check-api-unused" listLennart Poettering