summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2013-09-26configure.ac: add header check for mtd/mtd-user.hAnthony G. Basile
This addresses https://github.com/gentoo/eudev/issues/73 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-09-14configure.ac: compat with upstream 207Anthony G. Basile
2013-09-10configure.ac: moving towards release 1.3Anthony G. Basile
2013-08-16configure.ac: remove check for mktimerofl0r
mktime is not used anywhere in the code, and the stock configure check for mktime invokes UB, so lets just remove it. closes #71
2013-08-02configure.ac: compatible with systemd 206Anthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-07-31Revert "static-nodes: remove creation of static nodes if HAVE_LIBKMOD"Ian Stakenvicius
This reverts commit aa417a4d83999f6d7f092161d5c411b8cbce9977. Preface: The kmod+tmpfiles static dev-node creation requires two commands to be executed at runtime -- it is not something that will automatically occur without a system's setup being explicitly designed or changed so that these commands are executed. Preface2: In order for the kmod+tmpfiles static dev-node creation to work properly, that -must- be executed at startup before {systemd-,}udevd starts. The reason for this is because udevd will only set permissions on those files at startup, and so if udevd starts beforehand then these nodes will exist with permissions that are (probably) too restrictive. The function in udevd which creates static-nodes is non-fatal and only updates mtime on the devnodes if they already exist. As such, if a system is configured to execute kmod+tmpfiles to create static-nodes, because that must occur first, eudev's udevd will not conflict. Also, if a system does not execute kmod+tmpfiles, then eudev will still create the static devnodes, even if kmod-14 or higher is installed. There *may* be a conflict if kmod+tmpfiles is executed after udevd starts, but as per "preface2" this is not a supported configuration. Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
2013-07-31static-nodes: remove creation of static nodes if HAVE_LIBKMODAnthony G. Basile
This address upstream commit edeb68c53f1cdc452016b4c8512586a70b1262e3 and https://bugs.gentoo.org/show_bug.cgi?id=477890. If eudev is configured with --enable-libkmod then we check for kmod >= 14 and ifdef out the code removed in the upstream commit. Otherwise we retain it for modutils. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-07-24Switch from external keymaps to internal (hwdb) keymapsIan Stakenvicius
This commit imports the new internal keyboard handling from upstream. This is a combination of many upstream commits, including those that added code, removed old code, and updated the hwdb. Some commits (hwdb ones specifically) were unrelated but brought in anyways to keep the whole hwdb consistent. Each upstream commit included is as follows: 9d7d42bc406a2ac04639674281ce3ff6beeda790 - internal keymap support 0c959b39175b126fdb70ae00de37ca6d9c8ca3a1 - hwdb: keyboard -- add file e8193554925a22b63bef0e77b8397b56d63a91ff - hwdb: keyboard -- update comments c79d894d590fc9df4861738555cc43c477e33376 - hwdb: import data aedc2eddd16e48d468e6ad0aea2caf00c7d37365 - hwdb: keyboard update 97a9313cafccf772ce03f5ebd36fe4d9d8412583 - hwdb: drop non-existant Samsung 900XC3 from keymap ddc77f62244bb41d5c8261517e2e1ff1b763fc94 - switch from udev keymaps to hwdb 0c3815773331b263713f4f7b9d80bc1ca159338e - also remove keymaps-force-release directory 1b6bce89b3383904d0dab619dd38bff673f7286e - keymap: re-add Logitech USB corded/cordless models bf89b99c5a39115112c2eda4c2103e2db54988d2 - 60-keyboard.hwdb: Fix syntax error ce39bb6909578017aa10031638e724e038f0b859 - hwdb: data update, upstream 884c86812c51479496edd50b278383d7bb67baf0 - rules: keyboard - use builtin command All code from each of the above commits is attributed to the original authors. There were some adjustments made in order to support the code differences between upstream and eudev, which was done by myself. Also of note is that the code can still be disabled via the --disable-keymaps configure option, which was removed from upstream. Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
2013-07-11Version bump to 1.1Anthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-06-09Version bump to 1.0, dropping _beta tageudev/v1.0Anthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-06-04Remove libudev-legacyAnthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-10Version bump to eudev-1_beta4eudev/v1_beta4Anthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-09build-sys: fix HAVE/ENABLE_FIRMWAREKay Sievers
This fixes: https://github.com/gentoo/eudev/issues/55 https://bugs.freedesktop.org/show_bug.cgi?id=62864 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-07src/udev/udev-event.c: restore code to allow rule generator to workAnthony G. Basile
This code was dropped while importing from upstream. It is needed to allow the legacy renaming of interfaces like eth* or wlan*. X-Eudev-Bug: 56 X-Eudev-Bug-URL: https://github.com/gentoo/eudev/issues/56 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-05bump versions to eudev-1_beta3 and udev-200Ian Stakenvicius
2013-04-04Set rootprefix to be '${prefix}' if unsetIan Stakenvicius
Previously, rootprefix was set to the actual value of the default prefix, which caused issues when running 'make distcheck' since prefix is set to a non-standard value but rootprefix is unset. By assigning the variable rather than its contents, this should now be avoided.
2013-04-04set default prefix to /usr for necessary rootprefix default operationIan Stakenvicius
2013-04-04Removed hard-coded paths in rule-writer scriptsIan Stakenvicius
Both scripts had hard-coded paths to 'rule_generator.functions'; these were changed to be substituted in by configure so the paths will match where files are installed.øy Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-04Restored the rule generator bits from udev-171Ian Stakenvicius
This restores the rule generator scripts for the persistent network and optical device rule generator scripts that were removed after udev-171, and re-introduces their installation to the build system. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-02udev: make firmware loading optional and disable by defaultTom Gundersen
Distros that whish to support old kernels should set --with-firmware-dirs="/usr/lib/firmware/updates:/usr/lib/firmware" to retain the old behaviour. Signed-off-by: Anthony G. Basile <blueness@gentoo.org> Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
2013-03-14Fix whitespace in various filesAnthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-03-10Only check for gperf if --enable-keymapAnthony G. Basile
gperf is only used to generate some header file for src/keymap, and so we should only test for its existence if --enable-keymap is given. See: https://github.com/gentoo/eudev/issues/50 https://bugs.gentoo.org/show_bug.cgi?id=452760 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-02-04Make udevlibexecdir be /libIan Stakenvicius
ie, fix another regression in our build system ; gentoo bug 455326 it's common for eg. mips systems to not have symlink from the directory {lib32 or lib64} to /lib. only the libraries belong to /$(get_libdir) and everything in /lib/udev goes to, well, /lib/udev, NOT /$(get_libdir)/udev -- ssuominen Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
2013-01-29Fix AM_CONDITIONAL for HAVE_BLKIDIan Stakenvicius
Corrects error caused in commit a9ef3ca7642ae67fc6859d2b5861f8b0f0ab3a68 Signed-off-by: Ian Stakenvicius <axs@gentoo.org> Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
2013-01-28Make blkid optionalIan Stakenvicius
Embedded systems may not want to include util-linux when they do not intend to use blkid functionality Modified from original author's commit to not install 60-persistent-storage.rules if blkid is disabled systemd commit f553b3b1074151200187df916427a1468186435e Original author: Anders Olofsson <Anders.Olofsson@axis.com> Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-01-22Fix --disable-modules config optioneudev/v1_beta2Ian Stakenvicius
This option should be enabled by default, however there was no logic in AC_ARG_ENABLE to set the variable to be enabled when the flag was unspecified Signed-off-by: Ian Stakenvicius <axs@gentoo.org> Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-01-21Fall back on POSIX mkstemp() for systems lacking mkostemp()Anthony G. Basile
We add an autotools check to use mkstemp() and fcntl() when mkostemp() is missing. This is not strictly equivalent because we have no way of setting the file access mode O_WRONLY flag, but that should produce no functional difference. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-01-21Adjust version in configure.ac for beta2 releaseIan Stakenvicius
Signed-off-by: Anthony G. Basile <blueness@gentoo.org> Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
2013-01-21Forward-port of libudev.so.0 code from libudev-171Ian Stakenvicius
Add --enable-legacylib option to configure, allowing for build and installation of libudev.so.0 shared library for supporting pre-udev-183 software. Library is installed to rootlibdir. Note that this legacy library will not be maintained, and should not be used for anything other than supporting a working system until all software on the system is migrated to use libudev.so.1 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-01-08Bump UDEV_VERSION as libudev is 196 compliantIan Stakenvicius
We haven't confirmed yet that everything is compliant with 196 but libudev is and it seems relevant that udevadm reports the udev version that provides hwdb functions Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-01-04Fixed some comments relating to udevlibexecdir pathsIan Stakenvicius
Keymaps rules had stated to add or modify /usr/lib/udev/* files instead of using generic paths, and there was no mention of /etc/udev/* being valid even though it is (and is the better way to do system-specific modifications)
2013-01-04Adjust the install path of keymaps to $(libdir)/udevIan Stakenvicius
Since these keymaps are the default reference files they should be installed in the same location as the default rules files. This matches sys-fs/udev behaviour as well
2012-12-27build: switch to C99Luca Barbato
Remove some redundant checks while at it.
2012-12-12Merge pull request #32 from nvinson/distcheck_fixblueness
Fix make distcheck error: "gtk-doc must be installed and enabled in order to make dist" Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-12-12Changed --enable-split-usr to add hard-coded paths for rules etc in both / ↵Ian Stakenvicius
and /usr This is necessary because the code originally defined paths assuming UDEV_LIBEXECDIR was /usr prefixed, and also that udevrulesdir was located in /etc. Since (1) both of these defaults have changed, and (2) they could be set to more or less anything, we want to ensure that there is support for the standard paths as well, irrespective of what UDEV_LIBEXECDIR and UDEV_RULES_DIR are set to. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-12-08Move DISTCHECK_CONFIGURE_FLAGS var to Makefile.amNick Vinson
DISTCHECK_CONFIGURE_FLAGS is an automake variable and is not properly detected when it is inside configure.ac
2012-12-08eudev 1_beta1eudev/v1_beta1Richard Yao
Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-12-08Add fallback path when accept4() is not available.Richard Yao
Commit ff2c503df091e6e4e9ab48cdb6df6ec8b7b525d0 introduced accept4() into udev, which broke compatibility with kernels older than Linux 2.6.32 (or Linux 2.6.36 on ARM). The purpose of accept4() is to permit O_NONBLOCK and O_CLOEXEC to be specified at the accept() call site while previously, they had to be set using fcntl() because Linux does not inherit them. Since accept4() increases the minimum kernel version, we add a fallback path for situations in which it is unavailable. Reported-by: Stephen Klimaszewski <steev@gentoo.org> Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-12-02Fix autotools module checksRichard Yao
Module loading support was unconditionally disabled in the initial autotools tests. I had missed this in my testing because I still had the 80-drivers.rules file from udev 171 on my system, which masked this issue by invoking modprobe explicitly. This patch corrects the issue. Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-12-02Use udev version instead of eudev version for compatibilityRichard Yao
The use of the eudev version in pkgconfig files caused build failures, so we switch to the udev version for compatibility purposes. Resolves gentoo/eudev#22 Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-12-01drop ACL support, udev-acl is in consolekit upstreamIan Stakenvicius
2012-11-29Put rules.d back into rootlibdir/udev , not sure why/how it moved...Ian Stakenvicius
2012-11-25Fix up building gudev and introspection under make distcheckAnthony G. Basile
This commit makes sure that src/gudev/gudevprivate.h is included in the distribution, fixing a failure in building gudev with `make distcheck`. There's also some code cleanup and migration of all configurable paths to the main configure.ac file. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-25Fix compilation of gudev and introspectionAnthony G. Basile
This commit the related issues of building gudev with/out introspection. It draws on suggestions from nvinson in https://github.com/gentoo/eudev/pull/20 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-25Fixes the contents of udev.pcAnthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-24Fix paths: test/udev-test.pl now works under sudo make distcheckAnthony G. Basile
We move the test-udev.c and test-libudev.c from src/test to test. This corrects the a problem with hard coded relative paths finding the test/test/sys directory created by test/udev-test.pl. This commit draws heavily from nvinson patch in https://github.com/gentoo/eudev/pull/20 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-23Propagation of configured installation paths to Makefile.am and .c codeAnthony G. Basile
This commit is a continuation of the previous one in which all the configured paths obtained in configure.ac are propagated to the Makefile.am and .c files via AM_CPPFLAGS of the form -DUDEV_CONF_FILE=\"$(udevconffile)\". This should address the issue in https://github.com/gentoo/eudev/issues/17 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-23Consolidate configuration of all installation paths into configure.acAnthony G. Basile
The configuration of the installation paths for various components was scattered between the main configure.ac file and the various Makefile.am's. These components are: udev config file, hwdb, keymaps and force-release keymaps and the rules. This commit consolidates them all into one point in configure.ac and anticipates the inclusion of new AM_CPPFLAGS of the form -DHWDB_BIN=@udevhwdbdir@ as upstream has done, so it is easier to address issues like: https://github.com/gentoo/eudev/issues/17 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-23configure.ac: remove unecessary check for pythonAnthony G. Basile
The original checks for python were to build some man pages and for systemd-python. These checks are no longer relevant. There still is a dependency on python for tests but this is checked by test/rules-test.sh which tests for python or skips. Also, there is a dependency on perl for both tests and hwdb. These checks can be reintroduced at a future date when re revisit both. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-23configure.ac: clean up GTK_DOC_CHECKAnthony G. Basile
The GTK_DOC_CHECK macro includes AC_ARG_ENABLE/AS_HELP_STRING etc for --enable-gtk-doc and there is no need for a second check. One caveat should be noted: GTK_DOC_CHECK must begin the line for gtkdocize to recognize its presense in configure.ac. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-29 00:34:16 +0000