summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2013-04-25build-sys: add --with-debug-shell=PATHCristian Rodríguez
Distributions may have selinux but not sushell or might need to set a custom debug shell. Defaults to /sbin/sushell if selinux is enabled, /bin/sh if not. [zj: Renamed --with-debugshelltty to --with-debug-tty, and added a line in output showing DEBUGSHELL and DEBUGTTY. I figure that debug shell is pretty useful, and I hope the extra line in configure status will draw attention to it.]
2013-04-19build-sys: prevent library underlinkingEvangelos Foutras
Underlinking can cause subtle bugs like the recent issue with libnss_myhostname (which was fixed in commit 1e335af7).
2013-04-19build-sys: prepare release 202Lennart Poettering
2013-04-18buildsys: Add --disable-tests to avoid building testsHenrik Grindal Bakken
This patch adds --disable-tests to configure. It is based on a patch posted by Thierry Reding in 2010. The motivation for adding it is that some tests fail link-time when cross-compiling. The patch adds a new Makefile variable -- manual_tests -- and uses that instead of noinst_PROGRAMS. However, if ENABLE_TESTS is true, the former is added to the latter. It also renames noinst_tests to simply tests.
2013-04-17configure: use AC_CHECK_TOOL for objcopy, strings and gperfMartin Jansa
* using AC_PATH_TOOL does not allow to override it from shell environment which is useful when cross-compiling * with external toolchain I have different HOST_PREFIX and HOST_SYS AC_PATH_TOOL is using HOST_SYS as prefix and fails to find objcopy which is available only as ${TARGET_PREFIX}-objcopy then it tries objcopy without prefix which is found on host, but that objcopy does not work for !host (e.g. arm when building on x86) libs
2013-04-12bus: make the kdbus code valgrind cleanLennart Poettering
2013-04-08build-sys: prepare 201Lennart Poettering
2013-03-29build-sys: prepare release 200Lennart Poettering
2013-03-28build-sys: fix HAVE/ENABLE_FIRMWAREKay Sievers
https://bugs.freedesktop.org/show_bug.cgi?id=62864
2013-03-26build-sys: bump version and .so revisionsLennart Poettering
2013-03-25build-sys: add missing sed substitution for DEBUGTTYKay Sievers
2013-03-25build-sys: configurable debug shell tty pathUmut Tezduyar
2013-03-23add --with-telinit=PATH configure optionCristian Rodríguez
Distributions that never shipped upstart do not have "telinit" in /lib/upstart/.. Defaults to /lib/upstart/telinit so there is no change for systems existing installs.
2013-03-21build-sys: use _FORTIFY_SOURCE with new gcc level -OgZbigniew Jędrzejewski-Szmek
2013-03-20bus: add basic implementation of a native bus client libraryLennart Poettering
2013-03-20build-sys: fix typo in human-readable outputJan Engelhardt
2013-03-18udev: make firmware loading optional and disable by defaultTom Gundersen
Distros that whish to support old kernels should set --with-firmware-dirs="/usr/lib/firmware/updates:/usr/lib/firmware" to retain the old behaviour.
2013-03-07build-sys: bump release and sonamesLennart Poettering
2013-03-04build-sys: be more tolerant if dbus directories do not existMichael Biebl
use readlink -m instead of -f since we might be building in a minimal chroot where those directories do not actually exist and readlink -f would return an empty string.
2013-03-04build-sys: resolve absolute path for the dbus directoriesMichael Biebl
/usr/share/dbus-1/system-services simply looks a lot nicer then /usr/share/dbus-1/services/../system-services
2013-03-04build-sys: replace backticks `` with $()Michael Biebl
for consistencies sake use $() everywhere
2013-03-04build-sys: don't hard code bash-completion directoryMichael Biebl
2013-03-04build-sys: use $PKG_CONFIG instead of calling the pkg-config binary directlyMichael Biebl
2013-02-28Merge branch 'python-systemd-reader'Zbigniew Jędrzejewski-Szmek
* python-systemd-reader: python-systemd: rename Journal to Reader build-sys: upload python documentation to freedesktop.org systemd-python: add Journal class for reading journal python: build html docs using sphinx journalct: also print Python code in --new-id python: utilize uuid.UUID in logging python: add systemd.id128 module ... and 34 other commits In short: python module systemd.id128 is added, and existing systemd.journal gains a new class systemd.journal.Reader, which can be used to iterate over journal entries. Documentation is provided, and accessible under e.g. pydoc3 systemd.journal.Reader or firefox http://www.freedesktop.org/software/systemd/man/python-systemd/
2013-02-28build-sys: make sphinx support uncoditionalZbigniew Jędrzejewski-Szmek
It needs to be invoked explicitly, so there's no need to check explicitly.
2013-02-25debug-shell: don't be picky, use /bin/sh rather than /bin/bashTom Gundersen
In a minimal initramfs, one might not always have the full bash available. Typically if using busybox.
2013-02-22python: build html docs using sphinxZbigniew Jędrzejewski-Szmek
Build instructions: make make DESTIDIR=/tmp/... install make DESTIDIR=/tmp/... sphinx-html sphinx-man sphinx-epub ...
2013-02-13build-sys: make EFI support build-time optionalLennart Poettering
2013-02-13build-sys: make PolicyKit support compile-time optional (was ↵Lennart Poettering
runtime-optional already)
2013-02-13build-sys: disable tests in po/, docs/ with separate build dirZbigniew Jędrzejewski-Szmek
Both gtk-doc and intltoolize have problems with VPATH builds. "Creatively" disable tests when configuring from outside the source directory. This more-or-less reverts 9795da43c.
2013-02-11build-sys: add -U_FORTIFY_SOURCE to $PYTHON_CFLAGS when necessaryZbigniew Jędrzejewski-Szmek
This patch only adds one line, but moves python detection after cflags detection, so the result of the latter can be used in the former. $PYTHON_CFLAGS usually includes -D_FORTIFY_SOURCE, which will generate a warning when compiling without optimization. Avoid by undefining _FORTIFY_SOURCE.
2013-01-22Replace autoconf int max test with simple defineZbigniew Jędrzejewski-Szmek
2013-01-23configure.ac: combine --Wformat* options into one argumentKay Sievers
https://bugs.freedesktop.org/show_bug.cgi?id=59621
2013-01-18build-sys: add autoconf macro to pick macro for x32 compatibilityZbigniew Jędrzejewski-Szmek
2013-01-11build-sys: use _FORTIFY_SOURCE only if optimizingZbigniew Jędrzejewski-Szmek
Rather then force the user to undefine _FORTIFY_SOURCE, don't define it in the first place if it cannot be used. I'm assuming that -O* can only be sensibly specified in $CFLAGS.
2013-01-08build-sys: fix spelling of sysvrcndirsystemd/v197Lennart Poettering
2013-01-08build-sys: bump version and so revisionsLennart Poettering
2013-01-07build-sys: disable static librariesKay Sievers
2013-01-07bootchart: merge bootchartAuke Kok
Bootchart is renamed to 'systemd-bootchart' and installed as /usr/lib/systemd/systemd-bootchart. The configuration file will reside in /etc/systemd/bootchart.conf.
2013-01-07build-sys: fix help text for --disable-myhostnameLennart Poettering
2013-01-07nss-myhostname: integrate into systemd buildsystemTom Gundersen
Note that there are still some rome for cleanups. In particular, the .la files are now installed, which we probably don't want; and some of the macros in Makefile.am are likely redundan.
2013-01-05build-sys: use full path to python in scriptsZbigniew Jędrzejewski-Szmek
Commit c4eb236a2c didn't take into account the situation when the user sets e.g. PYTHON=python3 (without the full path). This value would then be used verbatim for PYTHON_BINARY and in she-bang lines in scripts, which is incorrect. To fix this, $PYTHON is passed through which, which expands the path. If $PYTHON_BINARY is desired which is not installed on the build system, then PYTHON_BINARY must be set separately.
2013-01-04build-sys: fix message about gintrospectionZbigniew Jędrzejewski-Szmek
When gobject-introspection-devel was not available, the message was missing the yes/no part
2013-01-04systemd-analyze: use specified binary, add --versionZbigniew Jędrzejewski-Szmek
Python binary used in the she-bang line in installed scripts can be set with ./configure PYTHON_BINARY=... Defaults to the same path as python used during compilation. Adding --version makes systemd-analyze behave consistently with the rest of installed programs. The lines in ./configure output are reordered to keep all yes/no lines separate. I think that this makes the output clearer.
2013-01-04build-sys: drop all distribution specfic checksLennart Poettering
Yay, we now have a completely generic systemd. No distribution specific checks anymore!
2013-01-04build-sys: make path of loadkeys/setfont configurable in configureLennart Poettering
2013-01-04systemctl: enable chkconfig compat only if chkconfig is found rather than ↵Lennart Poettering
based on distro
2013-01-04build-sys: make rc-local support part of SYSV compatLennart Poettering
This also drops automatic selection of the rc local scripts based on the local distro. Distributions now should specify the paths of the rc-local and halt-local scripts on the configure command line.
2012-11-24build-sys: drop TARGET_UBUNTULennart Poettering
TARGET_UBUNTU is effectively the same as TARGET_DEBIAN. Given the Ubuntu is unlikely to use systemd anytime soon there's no point in keeping this separate.
2012-11-21build-sys: prepare 196Lennart Poettering
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-08 02:45:45 +0000