summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2013-06-09Version bump to 1.0, dropping _beta tageudev/v1.0Anthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-06-04Remove libudev-legacyAnthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-10Version bump to eudev-1_beta4eudev/v1_beta4Anthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-09build-sys: fix HAVE/ENABLE_FIRMWAREKay Sievers
This fixes: https://github.com/gentoo/eudev/issues/55 https://bugs.freedesktop.org/show_bug.cgi?id=62864 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-07src/udev/udev-event.c: restore code to allow rule generator to workAnthony G. Basile
This code was dropped while importing from upstream. It is needed to allow the legacy renaming of interfaces like eth* or wlan*. X-Eudev-Bug: 56 X-Eudev-Bug-URL: https://github.com/gentoo/eudev/issues/56 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-05bump versions to eudev-1_beta3 and udev-200Ian Stakenvicius
2013-04-04Set rootprefix to be '${prefix}' if unsetIan Stakenvicius
Previously, rootprefix was set to the actual value of the default prefix, which caused issues when running 'make distcheck' since prefix is set to a non-standard value but rootprefix is unset. By assigning the variable rather than its contents, this should now be avoided.
2013-04-04set default prefix to /usr for necessary rootprefix default operationIan Stakenvicius
2013-04-04Removed hard-coded paths in rule-writer scriptsIan Stakenvicius
Both scripts had hard-coded paths to 'rule_generator.functions'; these were changed to be substituted in by configure so the paths will match where files are installed.øy Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-04Restored the rule generator bits from udev-171Ian Stakenvicius
This restores the rule generator scripts for the persistent network and optical device rule generator scripts that were removed after udev-171, and re-introduces their installation to the build system. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-04-02udev: make firmware loading optional and disable by defaultTom Gundersen
Distros that whish to support old kernels should set --with-firmware-dirs="/usr/lib/firmware/updates:/usr/lib/firmware" to retain the old behaviour. Signed-off-by: Anthony G. Basile <blueness@gentoo.org> Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
2013-03-14Fix whitespace in various filesAnthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-03-10Only check for gperf if --enable-keymapAnthony G. Basile
gperf is only used to generate some header file for src/keymap, and so we should only test for its existence if --enable-keymap is given. See: https://github.com/gentoo/eudev/issues/50 https://bugs.gentoo.org/show_bug.cgi?id=452760 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-02-04Make udevlibexecdir be /libIan Stakenvicius
ie, fix another regression in our build system ; gentoo bug 455326 it's common for eg. mips systems to not have symlink from the directory {lib32 or lib64} to /lib. only the libraries belong to /$(get_libdir) and everything in /lib/udev goes to, well, /lib/udev, NOT /$(get_libdir)/udev -- ssuominen Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
2013-01-29Fix AM_CONDITIONAL for HAVE_BLKIDIan Stakenvicius
Corrects error caused in commit a9ef3ca7642ae67fc6859d2b5861f8b0f0ab3a68 Signed-off-by: Ian Stakenvicius <axs@gentoo.org> Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
2013-01-28Make blkid optionalIan Stakenvicius
Embedded systems may not want to include util-linux when they do not intend to use blkid functionality Modified from original author's commit to not install 60-persistent-storage.rules if blkid is disabled systemd commit f553b3b1074151200187df916427a1468186435e Original author: Anders Olofsson <Anders.Olofsson@axis.com> Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-01-22Fix --disable-modules config optioneudev/v1_beta2Ian Stakenvicius
This option should be enabled by default, however there was no logic in AC_ARG_ENABLE to set the variable to be enabled when the flag was unspecified Signed-off-by: Ian Stakenvicius <axs@gentoo.org> Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-01-21Fall back on POSIX mkstemp() for systems lacking mkostemp()Anthony G. Basile
We add an autotools check to use mkstemp() and fcntl() when mkostemp() is missing. This is not strictly equivalent because we have no way of setting the file access mode O_WRONLY flag, but that should produce no functional difference. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-01-21Adjust version in configure.ac for beta2 releaseIan Stakenvicius
Signed-off-by: Anthony G. Basile <blueness@gentoo.org> Signed-off-by: Ian Stakenvicius <axs@gentoo.org>
2013-01-21Forward-port of libudev.so.0 code from libudev-171Ian Stakenvicius
Add --enable-legacylib option to configure, allowing for build and installation of libudev.so.0 shared library for supporting pre-udev-183 software. Library is installed to rootlibdir. Note that this legacy library will not be maintained, and should not be used for anything other than supporting a working system until all software on the system is migrated to use libudev.so.1 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-01-08Bump UDEV_VERSION as libudev is 196 compliantIan Stakenvicius
We haven't confirmed yet that everything is compliant with 196 but libudev is and it seems relevant that udevadm reports the udev version that provides hwdb functions Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2013-01-04Fixed some comments relating to udevlibexecdir pathsIan Stakenvicius
Keymaps rules had stated to add or modify /usr/lib/udev/* files instead of using generic paths, and there was no mention of /etc/udev/* being valid even though it is (and is the better way to do system-specific modifications)
2013-01-04Adjust the install path of keymaps to $(libdir)/udevIan Stakenvicius
Since these keymaps are the default reference files they should be installed in the same location as the default rules files. This matches sys-fs/udev behaviour as well
2012-12-27build: switch to C99Luca Barbato
Remove some redundant checks while at it.
2012-12-12Merge pull request #32 from nvinson/distcheck_fixblueness
Fix make distcheck error: "gtk-doc must be installed and enabled in order to make dist" Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-12-12Changed --enable-split-usr to add hard-coded paths for rules etc in both / ↵Ian Stakenvicius
and /usr This is necessary because the code originally defined paths assuming UDEV_LIBEXECDIR was /usr prefixed, and also that udevrulesdir was located in /etc. Since (1) both of these defaults have changed, and (2) they could be set to more or less anything, we want to ensure that there is support for the standard paths as well, irrespective of what UDEV_LIBEXECDIR and UDEV_RULES_DIR are set to. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-12-08Move DISTCHECK_CONFIGURE_FLAGS var to Makefile.amNick Vinson
DISTCHECK_CONFIGURE_FLAGS is an automake variable and is not properly detected when it is inside configure.ac
2012-12-08eudev 1_beta1eudev/v1_beta1Richard Yao
Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-12-08Add fallback path when accept4() is not available.Richard Yao
Commit ff2c503df091e6e4e9ab48cdb6df6ec8b7b525d0 introduced accept4() into udev, which broke compatibility with kernels older than Linux 2.6.32 (or Linux 2.6.36 on ARM). The purpose of accept4() is to permit O_NONBLOCK and O_CLOEXEC to be specified at the accept() call site while previously, they had to be set using fcntl() because Linux does not inherit them. Since accept4() increases the minimum kernel version, we add a fallback path for situations in which it is unavailable. Reported-by: Stephen Klimaszewski <steev@gentoo.org> Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-12-02Fix autotools module checksRichard Yao
Module loading support was unconditionally disabled in the initial autotools tests. I had missed this in my testing because I still had the 80-drivers.rules file from udev 171 on my system, which masked this issue by invoking modprobe explicitly. This patch corrects the issue. Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-12-02Use udev version instead of eudev version for compatibilityRichard Yao
The use of the eudev version in pkgconfig files caused build failures, so we switch to the udev version for compatibility purposes. Resolves gentoo/eudev#22 Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-12-01drop ACL support, udev-acl is in consolekit upstreamIan Stakenvicius
2012-11-29Put rules.d back into rootlibdir/udev , not sure why/how it moved...Ian Stakenvicius
2012-11-25Fix up building gudev and introspection under make distcheckAnthony G. Basile
This commit makes sure that src/gudev/gudevprivate.h is included in the distribution, fixing a failure in building gudev with `make distcheck`. There's also some code cleanup and migration of all configurable paths to the main configure.ac file. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-25Fix compilation of gudev and introspectionAnthony G. Basile
This commit the related issues of building gudev with/out introspection. It draws on suggestions from nvinson in https://github.com/gentoo/eudev/pull/20 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-25Fixes the contents of udev.pcAnthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-24Fix paths: test/udev-test.pl now works under sudo make distcheckAnthony G. Basile
We move the test-udev.c and test-libudev.c from src/test to test. This corrects the a problem with hard coded relative paths finding the test/test/sys directory created by test/udev-test.pl. This commit draws heavily from nvinson patch in https://github.com/gentoo/eudev/pull/20 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-23Propagation of configured installation paths to Makefile.am and .c codeAnthony G. Basile
This commit is a continuation of the previous one in which all the configured paths obtained in configure.ac are propagated to the Makefile.am and .c files via AM_CPPFLAGS of the form -DUDEV_CONF_FILE=\"$(udevconffile)\". This should address the issue in https://github.com/gentoo/eudev/issues/17 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-23Consolidate configuration of all installation paths into configure.acAnthony G. Basile
The configuration of the installation paths for various components was scattered between the main configure.ac file and the various Makefile.am's. These components are: udev config file, hwdb, keymaps and force-release keymaps and the rules. This commit consolidates them all into one point in configure.ac and anticipates the inclusion of new AM_CPPFLAGS of the form -DHWDB_BIN=@udevhwdbdir@ as upstream has done, so it is easier to address issues like: https://github.com/gentoo/eudev/issues/17 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-23configure.ac: remove unecessary check for pythonAnthony G. Basile
The original checks for python were to build some man pages and for systemd-python. These checks are no longer relevant. There still is a dependency on python for tests but this is checked by test/rules-test.sh which tests for python or skips. Also, there is a dependency on perl for both tests and hwdb. These checks can be reintroduced at a future date when re revisit both. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-23configure.ac: clean up GTK_DOC_CHECKAnthony G. Basile
The GTK_DOC_CHECK macro includes AC_ARG_ENABLE/AS_HELP_STRING etc for --enable-gtk-doc and there is no need for a second check. One caveat should be noted: GTK_DOC_CHECK must begin the line for gtkdocize to recognize its presense in configure.ac. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-23Permit users to disable module loading supportRichard Yao
Inspired by e30431623a7d871da123cc37055ac49abf2c20ea from systemd. Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-11-23Use libkmod only when requestedRichard Yao
We support module loading through modprobe when libkmod is neither available nor wanted. Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-11-23Reintroduce blkid-kmodRichard Yao
This opens the door to using disabling the use of kmod from autotools. Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-11-22Fix keymap test during make distcheckAnthony G. Basile
The keys/keymap test preformed by src/keymap/check-keymaps.sh must find both keys.txt and the keymap directory. When building out of the source tree, eg when doing `make distcheck`, these are located at ${top_builddir}/src/keymap/keys.txt and ${top_srcdir}/keymap/, respectively. This patch fixes the build so that these are now correctly found. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-22configure.ac: change package name to eudevAnthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-22Make udevlibexecdir be substituted out of configure and assigned ↵Ian Stakenvicius
${rootlibdir}/udev instead of ${root}/lib/udev
2012-11-20Reintroduce keymaps build and testAnthony G. Basile
This commit reintroduces code to 1) build src/keymap 2) test keymap/Makefile.am that it has all the key maps listed 3) test that all the key names in keymap/* are in <linux/input.h> 4) do a syntax check on rules/*.rules which now includes 95-keymap.rules and 95-keyboard-force-release.rules For #4, the regex expressions in rule-syntax-check.py had to be updated. They do not allow trailing comments via # comment, and I did not include that. A rule in 95-keymap.rules had to have its comment moved from the end to another line. Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2012-11-19Reintroduce blkid-builtinRichard Yao
The build failure that prompted its removal has been resolved. Signed-off-by: Richard Yao <ryao@gentoo.org>
2012-11-19Check for unshare on the configure and provide an inline replacement when ↵klondike
not available