| Age | Commit message (Collapse) | Author |
|---|
|
|
|
but let's make it available via "autogen.sh a"
|
|
Even if the lower-leveld dbus1 protocol calls it "serial", let's expose
the word "cookie" for this instead, as this is what kdbus uses and since
it doesn't imply monotonicity the same way "serial" does.
|
|
|
|
systemd-bus-driverd is a small daemon that connects to kdbus and
implements the org.freedesktop.DBus interface. IOW, it provides the bus
functions traditionally taken care for by dbus-daemon.
Calls are proxied to kdbus, either via libsystemd-bus (were applicable)
or with the open-coded use of ioctl().
Note that the implementation is not yet finished as the functions to
add and remove matches and to start services by name are still missing.
|
|
__DATE__ and suchlike
|
|
|
|
Since we want to retain the ability to break kernel ←→ userspace ABI
after the next release, let's not make use by default of kdbus, so that
people with future kernels will not suddenly break with current systemd
versions.
kdbus support is left in all builds but must now be explicitly requested
at runtime (for example via setting $DBUS_SESSION_BUS). Via a configure
switch the old behaviour can be restored. In fact, we change autogen.sh
to do this, so that git builds (which run autogen.sh) get kdbus by
default, but tarball builds (which ue the configure defaults) do not get
it, and hence this stays out of the distros by default.
|
|
This reverts commit f1a1264d13b31b9f5521f482d9a5a9d78da55efb.
We can turn this off with a pragma only on old gcc. Newer gcc doesn't
need this, so let's not turn this off for everybody.
|
|
We already use various constructs, so let's just admit that we're using C99.
|
|
At some point it should become disabled by default.
http://lists.freedesktop.org/archives/systemd-devel/2013-November/014869.html
|
|
|
|
|
|
Since valgrind only generates useful output on exit() (rather than
exec()) we need to explicitly exit when valgrind is detected.
|
|
This allows make rules for generated build files (i.e. configure,
Makefile.in, ... ) to be skipped. This is useful when
the source is stored without timestamps (for example in CVS or GIT).
When the build rules trigger to regenerate the build files, it tries to
use the same autotools version (currently 1.14) as was originally used
for the release. Since many of our build machines run Debian Squeeze,
they only have autotools 1.11 available and the build fails.
Currently, we have to work around this by touching all the generated
files before building to avoid triggering the make rule. With this
patch, we would be able to just run configure with
--disable-maintainer-mode instead. The patch sets the default to enable
to not change the default behavior.
Ref: http://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/
?id=f5cc26c77d2f332a9b40f51f0ec72e95711edf1e
|
|
For GNOME (Continuous), we are unlikely to require or want
systemd-networkd in the near term future; all of the tools and code
are targeting NetworkManager.
The long term story is still an open question of course, but for now,
there's no reason for gnome-continuous to build or ship this.
|
|
|
|
Older gcc versions throw things like:
In file included from /usr/include/fcntl.h:302:0,
from ../src/core/execute.c:25:
In function 'open',
inlined from 'open_null_as' at ../src/core/execute.c:196:12:
/usr/include/bits/fcntl2.h:50:24: error: call to '__open_missing_mode'
declared with attribute error: open with O_CREAT in second argument needs 3 arguments
__open_missing_mode ();
|
|
|
|
|
|
This is no longer necessary with kmod-15. Bump the requirement.
|
|
This works analogous to the existing backlight and random seed services
|
|
Allows the systemd --system process to change its current
SMACK label to a predefined custom label (usually "system")
at boot time.
This is needed to have a few system-generated folders and
sockets automatically be created with the right SMACK
label. Without that, processes either cannot communicate with
systemd or systemd fails to perform some actions.
|
|
|
|
|
|
|
|
|
|
Enabling address sanitizer seems like a useful thing, but is quite
tricky. Proper flags have to be passed to CPPFLAGS, CFLAGS and
LDFLAGS, but passing them on the commandline doesn't work because
we tests are done with ld directly, and not with libtool like in
real linking. We might want to fix this, but let's add a handy
way to enable address checking anyway.
|
|
The modules should build just fine, but AM_PATH_PYTHON sets
pkgpyexecdir for us. Without that variable we don't know where to
install modules. In addition libtool tries an empty rpath, breaking
the build. Those issues could be fixed or worked around, but we
probably don't have many people who want to avoid using python binary,
but want to compile python modules. If such uses ever come up, this
issue should be revisited.
|
|
|
|
systemd-logind will start user@.service. user@.service unit uses
PAM with service name 'systemd-user' to perform account and session
managment tasks. Previously, the name was 'systemd-shared', it is
now changed to 'systemd-user'.
Most PAM installations use one common setup for different callers.
Based on a quick poll, distributions fall into two camps: those that
have system-auth (Redhat, Fedora, CentOS, Arch, Gentoo, Mageia,
Mandriva), and those that have common-auth (Debian, Ubuntu, OpenSUSE).
Distributions that have system-auth have just one configuration file
that contains auth, password, account, and session blocks, and
distributions that have common-auth also have common-session,
common-password, and common-account. It is thus impossible to use one
configuration file which would work for everybody. systemd-user now
refers to system-auth, because it seems that the approach with one
file is more popular and also easier, so let's follow that.
|
|
btrfs.h was added to uapi in Linux 3.9. To fix building with older
header versions this adds a configure check for the header and re-adds
btrfs definitions to missing.h which was removed in bed2e820 along with
two other ioctls used by gpt-auto-generator.
[ Apparently, btrfs.h was only added recently:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=55e301fd57a6239ec14b91a1cf2e70b3dd135194
let's re-add it for now -- kay ]
|
|
As many laptops don't save/restore screen brightness across reboots,
let's do this in systemd with a minimal tool, that restores the
brightness as early as possible, and saves it as late as possible. This
will cover consoles and graphical logins, but graphical desktops should
do their own per-user stuff probably.
This only touches firmware brightness controls for now.
|
|
Moved zsh shell completion to shell-completion/zsh/_systemd for
automake's sake. Also allow users to specify where the files should go
with::
./configure --with-zshcompletiondir=/path/to/some/where
and by default going to `$datadir/zsh/site-functions`
|
|
|
|
|
|
Python 2.7, and 3.2 and higher support querying compilation
flags through pkg-config. This makes python support follow
rules similar to various other optional compilation-time
libraries. New flags are called PYTHON_DEVEL_CFLAGS and
PYTHON_DEVEL_LIBS, because PYTHON (without _DEVEL), is
already used for the python binary name, and things would
be confusing if the same prefix was used for two things.
configure has --disable-python-devel to disable python modules.
One advantage is that CFLAGS for modules gets smaller:
- -I/usr/include/python3.3m -I/usr/include/python3.3m -Wno-unused-result -DDYNAMIC_ANNOTATIONS_ENABLED=1 -DNDEBUG -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -grecord-gcc-switches -m64 -mtune=generic -D_GNU_SOURCE -fPIC -fwrapv
+ -I/usr/include/python3.3m
as does LIBS:
- -lpthread -ldl -lutil -lm -lpython3.3m
+ -lpython3.3m
Support for Python 2.6 is removed, but can be easily
restored by using
PYTHON_DEVEL_CFLAGS="$(python2.6-config --cflags)",
etc., as ./configure parameters.
https://bugs.freedesktop.org/show_bug.cgi?id=57800
|
|
|
|
Back in 6a58bf4135 raising stop iteration was removed from the C
code, but wasn't added in the Python counterpart.
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=55248
|
|
Tcrypt uses a different approach to passphrases/key files. The
passphrase and all key files are incorporated into the "password"
to open the volume. So, the idea of slots that provide a way to
open the volume with different passphrases/key files that are
independent from each other like with LUKS does not apply.
Therefore, we use the key file from /etc/crypttab as the source
for the passphrase. The actual key files that are combined with
the passphrase into a password are provided as a new option in
/etc/crypttab and can be given multiple times if more than one
key file is used by a volume.
|
|
Enable coverage with --enable-coverage.
"make coverage" will create the report locally,
"make coverage-sync" will upload the report to
http://www.freedesktop.org/software/systemd/coverage/.
Requires lcov version 1.10 to handle naming in systemd and to
use the --no-external option.
[zj: make the coverage at least generate something with
separate build dir, simplify rules a bit: all errors
are mine. ]
|
|
This reverts commit cd3069559a09b4e4f85a6f02aa8f0521f48359ca.
Emacs compilation can be fixed by putting
(custom-set-variables
'(compilation-environment (quote ("GCC_COLORS="))))
in ~/.emacs.
|
|
Guys, we know that emacs is the best editor on earth, but unfortunately
its "M-x compile" terminal cannot do colors (well, it does its own
highlighting of the output anyway), and it will inform the programs it
calls about this with TERM=dumb, and gcc should check for that. But you
guys turned that off. Not cool. Let's turn it on again.
|
|
PKG_CHECK_EXISTS won't created a cached variable that later messes with
our PKG_CHECK_MODULES check for an explicit version. Unfortunately,
nesting these checks as the code existed lead to an odd error. Rather,
split the checks apart.
This also improves to the error message when the requisite version
isn't found, and supplies the literal version systemd needs.
|
|
Almost everyone wants kmod support, so don't fail silently if the libs are
out-of-date.
kmod can still be explicitly disabled and if it is not found at all, we still
default to disabling it.
|
|
As of kmod v14, it is possible to export the static node information from
/lib/modules/`uname -r`/modules.devname in tmpfiles.d(5) format.
Use this functionality to let systemd-tmpfilesd create the static device nodes
at boot, and drop the functionality from systemd-udevd.
As an effect of this we can move from systemd-udevd to systemd-tmpfiles-setup-dev:
* the conditional CAP_MKNOD (replaced by checking if /sys is mounted rw)
* ordering before local-fs-pre.target (see 89d09e1b5c65a2d97840f682e0932c8bb499f166)
|
|
|
|
Embedded folks don't need the machine registration stuff, hence it's
nice to make this optional. Also, I'd expect that machinectl will grow
additional commands quickly, for example to join existing containers and
suchlike, hence it's better keeping that separate from loginctl.
|
