summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2013-01-08build-sys: fix spelling of sysvrcndirsystemd/v197Lennart Poettering
2013-01-08build-sys: bump version and so revisionsLennart Poettering
2013-01-07build-sys: disable static librariesKay Sievers
2013-01-07bootchart: merge bootchartAuke Kok
Bootchart is renamed to 'systemd-bootchart' and installed as /usr/lib/systemd/systemd-bootchart. The configuration file will reside in /etc/systemd/bootchart.conf.
2013-01-07build-sys: fix help text for --disable-myhostnameLennart Poettering
2013-01-07nss-myhostname: integrate into systemd buildsystemTom Gundersen
Note that there are still some rome for cleanups. In particular, the .la files are now installed, which we probably don't want; and some of the macros in Makefile.am are likely redundan.
2013-01-05build-sys: use full path to python in scriptsZbigniew Jędrzejewski-Szmek
Commit c4eb236a2c didn't take into account the situation when the user sets e.g. PYTHON=python3 (without the full path). This value would then be used verbatim for PYTHON_BINARY and in she-bang lines in scripts, which is incorrect. To fix this, $PYTHON is passed through which, which expands the path. If $PYTHON_BINARY is desired which is not installed on the build system, then PYTHON_BINARY must be set separately.
2013-01-04build-sys: fix message about gintrospectionZbigniew Jędrzejewski-Szmek
When gobject-introspection-devel was not available, the message was missing the yes/no part
2013-01-04systemd-analyze: use specified binary, add --versionZbigniew Jędrzejewski-Szmek
Python binary used in the she-bang line in installed scripts can be set with ./configure PYTHON_BINARY=... Defaults to the same path as python used during compilation. Adding --version makes systemd-analyze behave consistently with the rest of installed programs. The lines in ./configure output are reordered to keep all yes/no lines separate. I think that this makes the output clearer.
2013-01-04build-sys: drop all distribution specfic checksLennart Poettering
Yay, we now have a completely generic systemd. No distribution specific checks anymore!
2013-01-04build-sys: make path of loadkeys/setfont configurable in configureLennart Poettering
2013-01-04systemctl: enable chkconfig compat only if chkconfig is found rather than ↵Lennart Poettering
based on distro
2013-01-04build-sys: make rc-local support part of SYSV compatLennart Poettering
This also drops automatic selection of the rc local scripts based on the local distro. Distributions now should specify the paths of the rc-local and halt-local scripts on the configure command line.
2012-11-24build-sys: drop TARGET_UBUNTULennart Poettering
TARGET_UBUNTU is effectively the same as TARGET_DEBIAN. Given the Ubuntu is unlikely to use systemd anytime soon there's no point in keeping this separate.
2012-11-21build-sys: prepare 196Lennart Poettering
2012-11-20build-sys: make loadable module support optionalTom Gundersen
kmod is unecessary if loadable module support is disabled in the kernel, so make the dependency optional.
2012-11-16udev: make blkid optionalAnders Olofsson
I'm building systemd for an embedded system and we would prefer not having to include the entire util-linux package just to get a libblkid whose functionality we don't need.
2012-11-14configure.ac: fix FTBFS with new glibcMichal Schmidt
glibc moved clock_* functions from librt to the core libc. As a result, clock_gettime is no more a suitable symbol to use when finding librt. Look for mq_open instead. Reference: http://www.sourceware.org/git/gitweb.cgi?p=glibc.git&h=6e6249d0b461b952d0f544792372663feb6d792a Fixes a FTBFS in Fedora Rawhide.
2012-11-13systemd-python: use python${PYTHON_VERSION}-config as python-configZbigniew Jędrzejewski-Szmek
This is the usual setup, where pythonX.Y and pythonX.Y-config go together. Using python-config with python3 will only lead to confusion. --libs is changed to --ldflags, since the latter also includes other required flags like -L<dir>. The tests for HAVE_PYTHON and HAVE_PYTHON_DEVEL are separated. It is possible to have python development libraries installed without the binary (or to want to build python modules without using python during the build). A line is added to the output, to show what flags will be used for python.
2012-10-23udev: add hardware database supportKay Sievers
2012-10-23build-sys: add check for microhttpd versionZbigniew Jędrzejewski-Szmek
2012-10-23build-sys: prepare 195Lennart Poettering
2012-10-21configure.ac: fix typo in fallback value for KILLDave Reisner
2012-10-18units: rework systemd-exit.service to terminate systemd via signal rather ↵Lennart Poettering
than bus This should make session termination more reliable, as D-Bus doesn't have to be around anymore for this to succeed.
2012-10-16journal: implement time-based rotation/vacuumingLennart Poettering
This also enables time-based rotation (but not vacuuming) after 1month, so that not more one month of journal is lost at a time per vacuuming.
2012-10-16configure.ac: Add a --without-python option.Wulf C. Krueger
Being able to be explicit about Python support (in addition to the default of auto-detecting it) and acting upon the result, specifying it as an option gains us more control about both dependencies and the resulting build. Furthermore, relying purely on auto-detection can lead to problems for source-based distros. E. g. systemd being built before *both* 32-bit & 64-bit ABIs are installed will lead to build failures as systemd's build system will pick up either 32-/64-bit Python, conclude both are available and fail if that's not the case.
2012-10-16build-sys: check for name_to_handle_at declaration instead of its definitionMichael Olbrich
AC_CHECK_FUNCS may be successful, even though name_to_handle_at and 'struct file_handle' are not available.
2012-10-09detect-virt: install with fs caps by default to allow unprivileged accessLennart Poettering
2012-10-03build-sys: prepare 194systemd/v194Lennart Poettering
2012-09-28build-sys: prepare 193Lennart Poettering
2012-09-28journal: add minimal journal gateway daemon based on GNU libmicrohttpdLennart Poettering
This minimal HTTP server can serve journal data via HTTP. Its primary purpose is synchronization of journal data across the network. It serves journal data in three formats: text/plain: the text format known from /var/log/messages application/json: the journal entries formatted as JSON application/vnd.fdo.journal: the binary export format of the journal The HTTP server also serves a small HTML5 app that makes use of the JSON serialization to present the journal data to the user. Examples: This downloads the journal in text format: # systemctl start systemd-journal-gatewayd.service # wget http://localhost:19531/entries Same for JSON: # curl -H"Accept: application/json" http://localhost:19531/entries Access via web browser: $ firefox http://localhost:19531/
2012-09-27build-sys: bump revisionLennart Poettering
2012-09-21build-sys: prepare release 191systemd/v191Lennart Poettering
2012-09-20build-sys: prepare v190Lennart Poettering
2012-09-20build-sys: require certain version of libselinuxJan Engelhardt
./.libs/libsystemd-core.a(libsystemd_core_la-selinux-access.o): In function "selinux_access_check": src/core/selinux-access.c:487: undefined reference to "selinux_check_access"
2012-09-17build-sys: __secure_getenv lost dunder in libc 2.17Zbigniew Jędrzejewski-Szmek
2012-09-13python: integrate David Strauss' python-systemd packageLennart Poettering
2012-09-11build-sys: perform autodetection of quota-tools binariesDave Reisner
Use AC_PATH_PROG to try and locate the quotaon and quotacheck binaries, falling back on hardcoded defaults when they can't be found.
2012-09-04missing: define name_to_handle_at on our own if it is missingLennart Poettering
2012-08-25build-sys: xsltproc is required for man pages and gtk-docZbigniew Jędrzejewski-Szmek
2012-08-23build-sys: prepare release 189systemd/v189Lennart Poettering
2012-08-20journalctl: output FSS key as QR code on generatingLennart Poettering
2012-08-20journal: make libgcrypt dependency optionalLennart Poettering
2012-08-13journald: initial version of FSPRG hookupLennart Poettering
This adds forward-secure authentication of journal files. This patch includes key generation as well as tagging of journal files, Verification of journal files will be added in a later patch.
2012-08-08build-sys: prepare release 188systemd/v188Lennart Poettering
2012-08-08build-sys: pass param to stack protectorLennart Poettering
2012-08-08build-sys: drop obsolete gcc switchLennart Poettering
2012-08-08build-sys: enable a couple of security featuresLennart Poettering
Most distributions enable these downstream anyway, but it probably makes sense to enable them unconditionally upstream too.
2012-08-01journal: add sd_journal_perror() to APILennart Poettering
2012-07-22build-sys: hide error message from grepZbigniew Jędrzejewski-Szmek
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-04 14:38:46 +0000