summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2016-03-17basic/missing: add copy_file_rangeZbigniew Jędrzejewski-Szmek
syscall numbers based on: https://fedora.juszkiewicz.com.pl/syscalls.html
2016-03-04Enable test-ipcrm, test-hostname in unsafe testsZbigniew Jędrzejewski-Szmek
2016-02-23Remove systemd-bootchartDaniel Mack
This commit rips out systemd-bootchart. It will be given a new home, outside of the systemd repository. The code itself isn't actually specific to systemd and can be used without systemd even, so let's put it somewhere else.
2016-02-22missing.h: Explicitly check for IFLA_BRPORT_PROXYARPDaniel Mack
RHEL explicitly disables IFLA_BRPORT_PROXYARP by renaming the enum value. In order to support unpatched builds, we have two options: a) redefine the enum value through missing.h and ignore the fact that it is really unsupported, or b) omit that enum value on rtnl_prot_info_bridge_port_types[] As we are not actually using this netlink type anywhere, and because it is only hooked up for the sake of completeness, this patch opts for the former.
2016-02-18Merge pull request #2621 from keszybz/wheel-groupMartin Pitt
build-sys: allow wheel group name to be specified
2016-02-17build-sys: allow references to wheel group to be omittedZbigniew Jędrzejewski-Szmek
https://github.com/systemd/systemd/issues/2492
2016-02-16build-sys: fix type detectionLennart Poettering
Before this patch existence of char16_t, char32_t, key_serial_t was checked with AC_CHECK_DECLS() which doesn't actually work for types. Correct this to use AC_CHECK_TYPES() instead. Also, while we are at it, change the check for memfd_create() to use AC_CHECK_DECLS() instead of AC_CHECK_FUNCS(). This is a better choice, since a couple of syscalls are defined by glibc but not exported in the header files (pivot_root() for example), and we hence should probably be more picky with memfd_create() too, which glibc might decide to expose one day, but not necessarily in the headers too.
2016-02-16resolved: turn on DNSSEC by default, unless configured otherwiseLennart Poettering
Let's make sure DNSSEC gets more testing, by defaulting DNSSEC to "allow-downgrade" mode. Since distros should probably not ship DNSSEC enabled by default add a configure switch to disable this again. DNSSEC in "allow-downgrade" mode should mostly work without affecting user experience. There's one exception: some captive portal systems rewrite DNS in order to redirect HTTP traffic to the captive portal. If these systems implement DNS servers that are otherwise DNSSEC-capable (which in fact is pretty unlikely, but still...), then this will result in the captive portal being inaccessible. To fix this support in NetworkManager (or any other network management solution that does captive portal detection) is required, which simply turns off DNSSEC during the captive portal detection, and resets it back to the default (i.e. on) after captive portal authentication is complete.
2016-02-13build-sys: drop libsystemd-{id128,daemon,login,journal}.so compat libsLennart Poettering
They have long been obsolete, and upstream distros and packages have mostly switched over, let's get rid of it for good.
2016-02-11Merge pull request #2587 from haraldh/tpmv3Lennart Poettering
sd-boot: put hashed kernel command line in a PCR of the TPM
2016-02-11sd-boot: put hashed kernel command line in a PCR of the TPMHarald Hoyer
The UEFI BIOS already hashes the contents of the loaded image, so the initrd and the command line of the binary are recorded. Because manually added LoadOptions are not taken into account, these should be recorded also. This patch logs and extends a TPM PCR register with the LoadOptions. This feature can be enabled with configure --enable-tpm The PCR register index can be specified with configure --with-tpm-pcrindex=<NUM>
2016-02-11configure: bump version numbersystemd/v229Lennart Poettering
2016-02-10coredump: dump priviliges when processing system coredumpsLennart Poettering
Let's add an extra-safety net and change UID/GID to the "systemd-coredump" user when processing coredumps from system user. For coredumps of normal users we keep the current logic of processing the coredumps from the user id the coredump was created under. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=87354
2016-02-10configure.ac: Fix help text of --enable-* optionsDaniel Mack
Fixes #2567
2016-01-27utf8.[ch] et al: use char32_t and char16_t instead of int, int32_t, int16_tShawn Landden
rework C11 utf8.[ch] to use char32_t instead of uint32_t when referring to unicode chars, to make things more expressive. [ @zonque: * rebased to current master * use AC_CHECK_DECLS to detect availibility of char{16,32}_t * make utf8_encoded_to_unichar() return int ]
2016-01-18build-sys: allow building man pages even if disabled in ./configureZbigniew Jędrzejewski-Szmek
This is purely for developer convenience: building man pages is slow so people tend to disable them when not working on documentation. But sometimes it is useful to build the man page to look something up, especially when working on an older machine which has outdated documentation, or to test some change to documentation. The rules to build man pages are now outside of the ENABLE_MANPAGES conditional, but they are not used unless manually invoked, and only the inclusion of man pages in build and install targets is affected by the conditional. Also, more generated files are removed in clean, which seems to be good thing, and Makefile.am is simplified.
2015-12-12build-sys: refactor `have_smack` detectionEvgeny Vereshchagin
2015-12-12build-sys: fix ./configure --enable-smackEvgeny Vereshchagin
Fixes: $ ./configure ... --enable-smack $ make src/core/load-fragment-gperf.c $ grep -i smack src/core/load-fragment-gperf.c {"Swap.SmackProcessLabel", config_parse_warn_compat, DISABLED_CONFIGURATION, 0}, ... should be {"Swap.SmackProcessLabel", config_parse_exec_smack_process_label, 0, offsetof(Swap, exec_context)}, ...
2015-12-10importd: drop dkr supportLennart Poettering
The current code is not compatible with current dkr protocols anyway, and dkr has a different focus ("microservices") than nspawn anyway ("whole machine containers"), hence drop support for it, we cannot reasonably keep this up to date, and it creates the impression we'd actually care for the microservices usecase.
2015-12-10Merge pull request #2129 from poettering/dnssec3Tom Gundersen
Third DNSSEC patch series
2015-12-10build-sys: libgcrypt error messages make no sense without libgpg-errorLennart Poettering
Hence, pull in this library too, if we need libgcrypt.
2015-12-09build: fix systemd-journal-upload installationEvgeny Vereshchagin
Fixes: $ ./configure ... --disable-microhttpd --enable-libcurl --enable-sysusers $ make && make install DESTDIR=$(pwd)/INST $ ls INST/usr/lib/sysusers.d/ basic.conf systemd.conf There is no a file with `systemd-journald-upload`
2015-11-18build: bump version numberssystemd/v228David Herrmann
Prepare for v228 release and bump version numbers.
2015-11-03build-sys: temporarily lower libmount version checkMartin Pitt
util-linux 2.27.1's configure.ac still claims to be 2.27.0, which breaks our version check. Lower it back to 2.27.0 until util-linux gets a fixed tarball. See #1754
2015-11-02core: drop check for /etc/mtabMartin Pitt
util-linux 2.27.1 now entirely stops looking at /etc/mtab, so we don't need to verify /etc/mtab during early boot any more. Later on, tmpfiles.d/etc.conf will fix /etc/mtab anyway, so there's not even a point in warning about it. Drop test_mtab() and bump the util-linux dependency to >= 2.17.1. Fixes #1495
2015-10-15Merge pull request #1527 from keszybz/lz4Lennart Poettering
Using lz4 frame api for coredump files
2015-10-14build-sys: enable lz4 by default if availableZbigniew Jędrzejewski-Szmek
--enable-lz4 can be used to force lz4 requirement, --disable-lz4 can be used to skip lz4 support even if available. Also, make surrounding checks for bzip2, xz, and zlib similar in structure. This fixes the check for requested but missing bzip2.
2015-10-14build: libdl is needed only for libnss_resolveMichal Schmidt
Not everything needs to link to libdl. dlopen+dlsym are used only by libnss_resolve.
2015-10-14build: don't link everything to libcapMichal Schmidt
The intent of the assignments around the check for libcap was obviously to avoid polluting LIBS. To work properly, LIBS must be restored from the save_LIBS variable. The practical effect is small though, because pretty much everything links with libbasic, which links with CAP_LIBS.
2015-10-14build: fix overlinking to libdwMichal Schmidt
We have two AC_CHECK_LIB checks for libdw. The first one has an empty action-if-found, so it defaults to adding "-ldw" to LIBS. LIBS are applied to everything we build. But only systemd-coredump needs libdw. It already links to ELFUTILS_LIBS correctly in Makefile.am. Drop the first AC_CHECK_LIB check. The second check is sufficient. Q: Don't we already use "-Wl,--as-needed" to eliminate overlinking? A: We do, but it is effective only for executables, not for shared libraries. This is due to a libtool bug: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=347650
2015-10-12build-sys: check for xsltproc when building manpagesZbigniew Jędrzejewski-Szmek
Only check for xsltproc if it will be used. If not found, complain. https://github.com/systemd/systemd/issues/1521
2015-10-10build-sys: use pkgconfig and lz4 and bump versionZbigniew Jędrzejewski-Szmek
The new frame api was released in v. 125.
2015-10-07configure.ac: bump version numberDaniel Mack
2015-10-07ask-password: add support for caching passwords in the kernel keyringLennart Poettering
This adds support for caching harddisk passwords in the kernel keyring if it is available, thus supporting caching without Plymouth being around. This is also useful for hooking up "gdm-auto-login" with the collected boot-time harddisk password, in order to support gnome keyring passphrase unlocking via the HDD password, if it is the same. Any passwords added to the kernel keyring this way have a timeout of 2.5min at which time they are purged from the kernel.
2015-10-05missing.h : add bridge paramsSusant Sahani
2015-09-24Merge pull request #1374 from olof/autoconf_gcrypt_depLennart Poettering
build-sys: only use AM_PATH_LIBGCRYPT macro if it exists
2015-09-24build-sys: only use AM_PATH_LIBGCRYPT macro if it existsOlof Johansson
If gcrypt's m4 macro files aren't installed, with this change, gcrypt will be disabled --- unless gcrypt support was explicitly requested by passing --enable-gcrypt to configure, in which case it will fail. Without this change, autoconf would fail either way with not being able to resolve AM_PATH_LIBGCRYPT.
2015-09-23build: remove AC_FUNC_MALLOCJan Engelhardt
What is the rationale to have AC_FUNC_MALLOC? It does not actually abort the configure run if an "unsuitable" malloc was found, and instead just replaces malloc by rpl_malloc, for which systemd however has no definition, either. Remove the call.
2015-09-22build-sys: Check behavior of -Werror=shadow before deciding to use itFilipe Brandenburger
gcc versions 4.6 and earlier used to complain when a local variable shadows a global function, 4.7 and above only complain if a local variable shadows a global variable. Fix this by checking whether gcc 4.7+ behavior is in place before deciding to use -Werror=shadow in $(CFLAGS), by using a custom test program source that shadows a global function with a local variable and confirming that -Werror=shadow does not make the compile to break. Tested: - On gcc 4.7 and 4.8, confirmed nothing changed (other than the order of the -Werror=shadow argument, going to the end of CFLAGS.) - On gcc 4.6, confirmed by looking at the config.log output that the check for -Werror=shadow failed and it was not included in CFLAGS. - Ran `make V=1` to confirm -Werror=shadow was still in use, introduced a bogus shadowing issue and confirmed it was caught when building with a recent gcc.
2015-09-14mount: use libmount to monitor mountinfo & utabKarel Zak
The current implementation directly monitor /proc/self/mountinfo and /run/mount/utab files. It's really not optimal because utab file is private libmount stuff without any official guaranteed semantic. The libmount since v2.26 provides API to monitor mount kernel & userspace changes and since v2.27 the monitor is usable for non-root users too. This patch replaces the current implementation with libmount based solution. Signed-off-by: Karel Zak <kzak@redhat.com>
2015-09-10smack: label /etc/mtab as "_" when '--with-smack-run-label' is enabled.Sangjung Woo
/etc/mtab should be labeled as "_", even though systemd has its own smack label using '--with-smack-run-label' configuration. This is mainly because all processes could read that file and the origin of this file (i.e. /proc/mounts) is labeled as "_". This labels /etc/mtab as "_" when '--with-smack-run-label' is enabled.
2015-09-08build: prepare for v226David Herrmann
Bump version info and update NEWS for the upcoming release.
2015-09-06build-sys: remove sphinx binary from configure summaryMichael Biebl
We no longer use sphinx as part of the build process so remove it from the configure summary as well. This is a leftover from commit 2799e519cabb6dfa99341b9a56ebd4dc2a4ec22a.
2015-09-01build-sys: Look for gcc-* binutils wrappers only if we're using GCCJan Alexander Steffens (heftig)
If we don't look for them, LT_INIT will and default to the unprefixed tools. Apparently clang doesn't like the wrappers being used. Should fix #1077.
2015-08-26build-sys: bump versionsKay Sievers
2015-08-06build-sys: line-wrap message about google serversZbigniew Jędrzejewski-Szmek
This way it is more readable in a wall of configure output.
2015-08-05build-sys: allow skipping installation of completionsZbigniew Jędrzejewski-Szmek
./configure --with-bashcompletiondir=no or --without-bashcompletiondir now works as expected. Similarly for zsh. https://github.com/systemd/systemd/issues/533
2015-07-31build: bump version to 224David Herrmann
Prepare for bug-fix release and bump versions.
2015-07-31build-sys: use 'test -f' instead of AC_CHECK_FILEJohannes Nixdorf
AC_CHECK_FILE fails when cross-compiling. It is intended to be used to check for files that are used at runtime during build time (e.g. /etc/passwd, /dev/*) [1]. For files which are only used at build time 'test -f' is sufficient. [1]: https://lists.gnu.org/archive/html/autoconf/2000-10/msg00018.html
2015-07-29build: bump version infosystemd/v223David Herrmann
Bump version to 223 and increase libsystemd libtool-info as we added a structure-member (without increasing structure size) to sd-bus-vtable.