summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2015-03-09missing.h: add NDA_*Michael Olbrich
This is necessary to build with older kernel headers. NDA_VLAN was introduced in v3.9 and NDA_PORT, NDA_VNI and NDA_IFINDEX in v3.10
2015-03-04build-sys: fix check for efi-lds fileMirco Tischler
Using the DIR macro breaks caching and has no benefit as it only offers performance improvements when AS_FOR is used with a single element list. Also --with-lds-dir= was broken as we never set have_efi_lds in this case. Fix this and check if PATH actually contains the efi-lds file.
2015-03-02build-sys: allow lto and FORTIFY_SOURCE with -O[sz]Zbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=89382
2015-02-24build-sys: fail if gnuefi files are not foundZbigniew Jędrzejewski-Szmek
The build would fail later anyway, so it is better to bail out early. Also check for the second bios file only if the first one was not found. I'm not sure which one is preferred. If the other one, the order should be flipped.
2015-02-24build: add -Wno-format-signednessDavid Herrmann
gcc5 introduced this option (gcc4 silently ignores it, which is fine). Given that gcc5 thinks 'unsigned char'/'unsigned short' is promoted to 'int' for var-args, stuff like this spits out warnings: uint8_t x; printf("%" PRIu8", x); gcc5 promots 'x' to 'int', instead of 'unsigned int' and thus gets a signedness-warnings as it expects an 'unsigned int'. glibc states otherwise: unsigneds are always promoted to 'unsigned int'. Until gcc and glibc figure this out, lets just ignore that warning (which is totally useless in its current form).
2015-02-18Add gettext supportDidier Roche
2015-02-17sd-boot: add EFI boot manager and stub loaderKay Sievers
2015-02-14sd-rtnl: add missing IFLA_INET6_ADDR_GEN_MODE definitionDjalal Harouni
Add missing IFLA_INET6_ADDR_GEN_MODE definition so we can build with kernel headers < 3.17
2015-02-13build-sys: already bump package version in preparation for next releaseLennart Poettering
(don't misunderstand this, the release is still out quite a bit...)
2015-01-28build-sys: make xz and zlib build-time optional againLennart Poettering
2015-01-27build-sys: make bzip2 really optionalLennart Poettering
2015-01-26build-sys: unbundle unifontZbigniew Jędrzejewski-Szmek
We should prefer the unifont.hex file from the system, instead of our own. Upstream has made a few releases since our version was included, and we should follow upstream changes. But adding 2.6MB to our source repo every time upstream releases is not nice.
2015-01-23build-sys: lookup for sulogin, it might not be in /sbinCristian Rodríguez
2015-01-22tmpfiles: use ACL magic on journal directoriesZbigniew Jędrzejewski-Szmek
2015-01-22import: introduce new mini-daemon systemd-importd, and make machinectl a ↵Lennart Poettering
client to it The old "systemd-import" binary is now an internal tool. We still use it as asynchronous backend for systemd-importd. Since the import tool might require some IO and CPU resources (due to qcow2 explosion, and decompression), and because we might want to run it with more minimal priviliges we still keep it around as the worker binary to execute as child process of importd. machinectl now has verbs for pulling down images, cancelling them and listing them.
2015-01-21build: Add parallel-tests automake optionMartin Pitt
We use PY_LOG_COMPILER in Makefile.am for running *.py tests, which requires automake's parallel test runner. This has only been the default from 1.13 on. As we only require automake 1.11, add it as an option explicitly.
2015-01-21import: support downloading bzip2-encoded imagesLennart Poettering
This way, we can import CoreOS images unmodified.
2015-01-19networkd: netdev - add ipvlan supportTom Gundersen
2015-01-16import: support importing qcow2 imagesLennart Poettering
With this change the import tool will now unpack qcow2 images into normal raw disk images, suitable for usage with nspawn. This allows has the benefit of also allowing importing Ubuntu Cloud images for usage with nspawn.
2015-01-13shared: add minimal firewall manipulation helpers for establishing NAT ↵Lennart Poettering
rules, using libiptc
2015-01-08build: print conditions of ldconfig, hibernate configsUmut Tezduyar Lindskog
2015-01-07util: make use of kcmp() to compare fds, if it is availableLennart Poettering
2014-12-28machinectl/machined: implement "rename", "clone", "read-only" verbs for ↵Lennart Poettering
machine images
2014-12-25configure.ac: keep posix compat for string testsDave Reisner
'==' and '=' are equivalent in /bin/bash, but POSIX compliant shells do not understand '==.'
2014-12-25build-sys: remove references to dbusinterfacedirFilipe Brandenburger
This directory is not used by systemd. Tested by running a full build, running `make install` and comparing the file list in the target trees and making sure that `make distcheck` still works.
2014-12-25build-sys: do not use pkgconfig dbus-1.pc to find dbus directoriesFilipe Brandenburger
Do not use the dbus-1.pc pkgconfig settings to determine dbus directories. Use directories relative to ${sysconfdir} and ${datadir} instead. This approach was suggested by Simon McVittie in: http://lists.freedesktop.org/archives/systemd-devel/2014-October/024388.html Tested by building and installing systemd without the dbus-devel installed. Without this patch, the dbus files and directories end up in the root of the filesystem. With this patch, they end up in the same locations as previously (assuming default ${sysconfdir} and ${datadir}) whether dbus-devel is present or not. Also made sure that `make check` works without dbus-devel installed.
2014-12-23import: rename 'poll-dck' to 'pull-dkr'Lennart Poettering
I figure "pull-dck" is not a good name, given that one could certainly read the verb in a way that might be funny for 16year-olds. ;-) Also, don't hardcode the index URL to use, make it runtime and configure time configurable instead.
2014-12-20build: add option to disable hwdbUmut Tezduyar Lindskog
[tomegun: fix Makefile-man.am, based on fix from Michael Biebl]
2014-12-14blkid: Warn when rejecting a superblock with a bad csumGabriel de Perthuis
Bump libblkid requirement from 2.20 to 2.24. util-linux 2.25 is actually required since fdbbad981cc5da8bb4ed7e9b6646e7a114745ec5
2014-12-13journal: add debug mode for mmap-cache (--enable-debug=mmap-cache)Michal Schmidt
This is useful for exposing unsafe access to mmapped objects after the context that they were mapped in was already moved. For example: journal_file_move_to_object(f1, OBJECT_DATA, p1, &o1); journal_file_move_to_object(f2, OBJECT_DATA, p2, &o2); t = o1->object.type; /* this usually works, but is unsafe */
2014-12-13configure.ac: add a generic --enable-debug, replace --enable-hashmap-debugMichal Schmidt
There will be more debugging options later. --enable-debug will enable them all. --enable-debug=hashmap will enable only hashmap debugging. Also rename the C #define to ENABLE_DEBUG_* pattern.
2014-12-10build-sys: bump package and library versions in preparation for 218 releaseLennart Poettering
2014-12-09bus-proxy: cloning smack labelPrzemyslaw Kedzierski
When dbus client connects to systemd-bus-proxyd through Unix domain socket proxy takes client's smack label and sets for itself. It is done before and independent of dropping privileges. The reason of such soluton is fact that tests of access rights performed by lsm may take place inside kernel, not only in userspace of recipient of message. The bus-proxyd needs CAP_MAC_ADMIN to manipulate its label. In case of systemd running in system mode, CAP_MAC_ADMIN should be added to CapabilityBoundingSet in service file of bus-proxyd. In case of systemd running in user mode ('systemd --user') it can be achieved by addition Capabilities=cap_mac_admin=i and SecureBits=keep-caps to user@.service file and setting cap_mac_admin+ei on bus-proxyd binary.
2014-11-30build-sys: configure the list of system users, files and directoriesŁukasz Stelmach
Choose which system users defined in sysusers.d/systemd.conf and files or directories in tmpfiles.d/systemd.conf, should be provided depending on comile-time configuration.
2014-11-28mount: use libmount to enumerate /proc/self/mountinfoChris Leech
This lets libmount add in user options from /run/mount/utab, like _netdev which is needed to get proper ordering against remote-fs.target
2014-11-24terminal/idev: add compose-file supportDavid Herrmann
Add support for compose files to idev-keyboard. This requires libxkbcommon-0.5.0, which is pretty new, but should be fine. We don't use the compose-files, yet. Further commits will put life into them.
2014-11-24localed: validate xkb keymapsDavid Herrmann
Introduce a new optional dependency on libxkbcommon for systemd-localed. Whenever the x11 keymap settings are changed, use libxkbcommon to compile the keymap. If the compilation fails, print a warning so users will get notified. On compilation failure, we still update the keymap settings for now. This patch just introduces the xkbcommon infrastructure to have keymap validation in place. We can later decide if/how we want to enforce this.
2014-11-22missing: add IFLA_BRPORT_LEARNING and friendsZbigniew Jędrzejewski-Szmek
IFLA_BRPORT_LEARNING was added in v3.10-rc4-583-g9ba18891f7, and IFLA_BRPORT_UNICAST_FLOOD in v3.10-rc4-584-g867a59436f.
2014-10-30configure.ac: add --enable-hashmap-debug optionMichal Schmidt
The option simply enables hashmap debugging by defining ENABLE_HASHMAP_DEBUG. I suggest developing new code with it enabled, to have the iterator checks.
2014-10-29util: make use of the new getrandom() syscall if it is available when ↵Lennart Poettering
needing entropy Doesn't require an fd, and could be a bit faster, so let's make use of it, if it is available.
2014-10-28build-sys: bump version number in preparation for releaseLennart Poettering
2014-10-28login: remove multi-seat-xTimofey Titovets
2014-10-17missing: remove fanotifyZbigniew Jędrzejewski-Szmek
It was only used in readahead.
2014-10-09build-sys: use -Wno-gnu-variable-sized-type-not-at-end under clangZbigniew Jędrzejewski-Szmek
Otherwise we get useless warnings about journal code.
2014-10-09build-sys: use -Wno-typedef-redefinition only for clangZbigniew Jędrzejewski-Szmek
Our checks for -Wno-xxx switches do not work with gcc [1]. [1] https://gcc.gnu.org/wiki/FAQ#wnowarning
2014-10-05build-sys: use linux/memfd.h if availableZbigniew Jędrzejewski-Szmek
linux/memfd.h was added linux 3.17, so it might not be widely available for a while. Also, check if memfd_create is defined, for the HAVE_LINUX_MEMFD_H check to have a chance of succeeding. Also, collapse all ifdefs for memfd-related stuff, because they were all added together so there's no need to check separately.
2014-09-26make utmp/wtmp support configurableEmil Renner Berthing
This adds --disable-utmp option to configure. If it is used, all utmp-related functionality, including querying runlevel support, is removed.
2014-09-25readahead: wipe out readaheadDaniel Buch
2014-09-19terminal: add graphics interfaceDavid Herrmann
The grdev layer provides graphics-device access via the libsystemd-terminal library. It will be used by all terminal helpers to actually access display hardware. Like idev, the grdev layer is built around session objects. On each session object you add/remove graphics devices as they appear and vanish. Any device type can be supported via specific card-backends. The exported grdev API hides any device details. Graphics devices are represented by "cards". Those are hidden in the session and any pipe-configuration is automatically applied. Out of those, we configure displays which are then exported to the API user. Displays are meant as lowest hardware entity available outside of grdev. The underlying pipe configuration is fully hidden and not accessible from the outside. The grdev tiling layer allows almost arbitrary setups out of multiple pipes, but so far we only use a small subset of this. More will follow. A grdev-display is meant to represent real connected displays/monitors. The upper level screen arrangements are user policy and not controlled by grdev. Applications are free to apply any policy they want. Real card-backends will follow in later patches.
2014-09-15build: colorize gcc only if on ttyMichal Schmidt
Rather than forcing gcc to always produce colorized error messages whether on tty or not, enable automatic colorization by ensuring GCC_COLORS is set to a non-empty string. Doing it this way removes the need for workarounds in ~/.emacs or ~/.vimrc for "M-x compile" or ":make", respectively, to work.