| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
For ALUA support it's useful to have the target port group number
of a device.
Signed-off-by: Hannes Reinecke <hare@suse.de>
|
|
|
|
|
|
|
|
Some SCSI devices use the same WWN and have a WWN extension that we
need to take into account when creating the /dev/disk/by-id/wwn
symlinks. Thus, introduce ID_WWN_WITH_EXTENSION. This property will
contain either the WWN (if no extension is present) or the WWN with
the vendor extension appended.
Example:
# /lib/udev/ata_id/ata_id --export /dev/sda |grep WWN
ID_WWN=0x5001517387d61905
ID_WWN_WITH_EXTENSION=0x5001517387d61905
# /lib/udev/scsi_id --whitelisted --export -d /dev/sdb |grep WWN
ID_WWN=0x600508b400105df7
ID_WWN_VENDOR_EXTENSION=0x0000e00000d80000
ID_WWN_WITH_EXTENSION=0x600508b400105df70000e00000d80000
# /lib/udev/scsi_id --whitelisted --export -d /dev/sdc |grep WWN
ID_WWN=0x600508b400105df7
ID_WWN_VENDOR_EXTENSION=0x0000e00000db0000
ID_WWN_WITH_EXTENSION=0x600508b400105df70000e00000db0000
Signed-off-by: David Zeuthen <davidz@redhat.com>
|
|
Since the Unit Serial Number and the WWN are useful bits of
information export them as properties in the udev database. These
bits of information are often printed on the physical disk, see
http://people.freedesktop.org/~david/FUJITSU-MAY2036RC-sas-disk-picture.jpg
and displaying them separately in the UI (or in /dev/disk) might help
users identify the physical disk. This patch exports these bits of
information as ID_WWN and ID_SCSI_SERIAL.
Note that ata_id also use the ID_WWN property since commit
66094a4a7fc1d303e80785d586800eae9841502b (2009-11-04).
Also print out ID_SCSI=1 so users of the udev database knows the disk
speaks SCSI.
Here's the scsi_id output from one of my SAS disks with these changes:
ID_SCSI=1
ID_VENDOR=FUJITSU
ID_VENDOR_ENC=FUJITSU\x20
ID_MODEL=MAY2036RC
ID_MODEL_ENC=MAY2036RC\x20\x20\x20\x20\x20\x20\x20
ID_REVISION=0103
ID_TYPE=disk
ID_SERIAL=3500000e01b83f520
ID_SERIAL_SHORT=500000e01b83f520
ID_WWN=0x500000e01b83f520
ID_SCSI_SERIAL=B3G1P8500RWT
Unfortunately we can't overload ID_SERIAL for two reasons
1. ID_SERIAL (and ID_SERIAL_SHORT) exported by scsi_id isn't really
the unit serial number (as defined by SCSI) - it is sometimes the
WWN (since it is more unique than the Unit Serial Number) and
complex rules (to make the serial unique) govern what value to
use.
2. It would break existing setups if the value of ID_SERIAL changed
Signed-off-by: David Zeuthen <davidz@redhat.com>
|
|
see https://bugzilla.redhat.com/show_bug.cgi?id=516920
|
|
It's provided by the kernel since 2.6.23.
|
|
Thanks to Lennart for the log file!
|
|
POSIX.1-2001 declares usleep() function obsolete and POSIX.1-2008
removes it.
[Kay Sievers]
- include time.h
- use const for timespec
- scsi_id: drop rand() in retry loop
- modem-probe: rename msuspend() to msleep()
|
|
Fix spelling in docbook comments, code comments, and a local variable
name. Thanks to "ispell -h" for docbook HTML and "scspell" for source
code.
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
|
|
Instead of using multiple recursive Makefile.am files, use a single
Makefile.am that sets and builds all the basic suite of libraries and
binaries for udev. This reduces the number of files in the source tree, and
also reduces drastically the build time when using parallel-make.
With this setup, all the compile steps will be executed in parallel, and
just the linking stage will be (partially) serialised on the libraries
creation.
|
|
|
|
The callers of prepend_vendor_model both expect < 0 to be returned on
error and the index to be returned otherwise. However
prepend_vendor_model actually returns 1 on error. Fix this by correctly
returning -1.
Older kernels (before e5b3cd42: "SCSI: sanitize INQUIRY strings")
truncated the model field in sysfs (or propagated bad results from the
target) to less than the expected/required 16 characters which meant
that the SCSI id was mangled into:
# /sbin/scsi_id -g -s /block/sdg
S146cee20VIRTUAL-DISK
when it should have been:
# /sbin/scsi_id -g -s /block/sdg
SIET VIRTUAL-DISK 146cee20
Notice how the serial number has been pasted over the vendor+model at
index 1 instead of being added at the end.
In the former case:
# cat /sys/devices/platform/host5/session1/target5:0:0/5:0:0:1/model | od -t c -t x1
0000000 V I R T U A L - D I S K \n
56 49 52 54 55 41 4c 2d 44 49 53 4b 0a
But it should have been:
# cat /sys/devices/platform/host5/session1/target5:0:0/5:0:0:1/model | od -t c -t x1
0000000 V I R T U A L - D I S K
56 49 52 54 55 41 4c 2d 44 49 53 4b 20 20 20 20
0000020 \n
0a
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
So ID_MODEL and ID_VENDOR are pretty useful keys. However since we fix
them up (removing leading/trailing whitespace, converts spaces to
underscores) for use in device naming etc. we also force these fixups on
the desktop shell. And this looks pretty ugly.
The attached patch introduces the ID_MODEL_ENC and ID_VENDOR_ENC keys
that contains the encoded version of the raw strings obtained. It's
pretty similar in spirit to ID_FS_LABEL and its cousin ID_FS_LABEL_ENC.
With this patch a desktop shell can fix up these strings as it sees fit.
Note that some fixup is still needed though, for example
# /lib/udev/ata_id --export /dev/sda |grep ID_MODEL
ID_MODEL=INTEL_SSDSA2MH080G1GC
ID_MODEL_ENC=INTEL\x20SSDSA2MH080G1GC\x20\x20\x20\x20\x20\x20\x20\x20
\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
Note the trailing and leading whitespace. Anyway with the attached patch
the desktop shell should be able to display "INTEL SSDSA2MH080G1GC"
rather than "INTEL_SSDSA2MH080G1GC" to the user.
|
|
[...] running the command
`make maintainer-clean' should not delete `configure' even if
`configure' can be remade using a rule in the Makefile. More
generally, `make maintainer-clean' should not delete anything that
needs to exist in order to run `configure' and then begin to build
the program. This is the only exception; `maintainer-clean' should
delete everything else that can be rebuilt.
|
|
|
|
|
|
|
|
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
|
|
|
|
|
|
The problem was strncpy() doesn't stop after writing the terminating
NUL; by definition it goes on to zero the entire buffer.
I spy another use of strncpy in udev_device_add_property_from_string(),
which is responsible for another ~1% user cpu time...
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
|
|
|
|
"Hello world!" linked against libselinux parses /proc/mounts and
whatever else on startup, even when the lib is not needed at all.
Not funny! Get rid of that thing where it's not absolutely needed.
|
|
|
|
|
|
|
|
The sg_io_v4 interface passes pointers as u64s. It turns out GCC
disapproves of us casting a u64 straight to a 32 bit pointer.
cc1: warnings being treated as errors
scsi_serial.c: In function ‘sg_err_category4’:
scsi_serial.c:159: warning: cast to pointer from integer of different size
scsi_serial.c: In function ‘scsi_dump_v4’:
scsi_serial.c:303: warning: cast to pointer from integer of different size
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
minus signs need to be escaped and the program is not in the $PATH anymore
|
|
I could not build scsi_id because of a missing #include
for sys/stat.h, so I had to add that.
Signed-off-by: Thomas Koeller <thomas@koeller.dyndns.org>
|
|
|
|
|
