| Age | Commit message (Collapse) | Author |
|---|
|
* configure the multipath target with round-robin path selector and
conservative default for a start : yes it makes this release the first
really useful one.
* temporarily disable map creation for single path device due to current
restrictive defaults in the kernel target. Sistina should work it out.
* correct the strncmp logic in blacklist function.
Tested on StorageWorks with 2.6.0-test10-udm1 :
xa-s03:~# ./multipath -v
60001fe1000bdad0000903507109004b (1 0 1 1) /dev/sda op:1 /dev/sda
[HSG80 ]
60001fe1000bdad000090371312100bf (1 0 1 2) /dev/sdb op:1 /dev/sdb
[HSG80 ]
60001fe1000bdad000090371312100c2 (1 0 1 3) /dev/sdc op:1 /dev/sdc
[HSG80 ]
60001fe1000bdad00009037131210067 (1 0 2 1) /dev/sdd op:1 /dev/sdd
[HSG80 ]
60001fe1000bdad000090371312100b3 (1 0 2 2) /dev/sde op:1 /dev/sde
[HSG80 ]
60001fe1000bdad00009035071090024 (1 0 2 3) /dev/sdf op:1 /dev/sdf
[HSG80 ]
600508b4000156d700012000000b0000 (1 0 3 1) /dev/sdg op:1 /dev/sdg
[HSV110 (C)COMPAQ]
600508b4000156c30001200000210000 (1 0 3 2) /dev/sdh op:1 /dev/sdh
[HSV110 (C)COMPAQ]
600508b4000156d700012000000b0000 (1 0 6 1) /dev/sdi op:1 /dev/sdi
[HSV110 (C)COMPAQ]
600508b4000156c30001200000210000 (1 0 6 2) /dev/sdj op:1 /dev/sdj
[HSV110 (C)COMPAQ]
60001fe1000bdad0000903507109004b
\_(1 0 1 1) /dev/sda op:1 /dev/sda [HSG80 ]
60001fe1000bdad000090371312100bf
\_(1 0 1 2) /dev/sdb op:1 /dev/sdb [HSG80 ]
60001fe1000bdad000090371312100c2
\_(1 0 1 3) /dev/sdc op:1 /dev/sdc [HSG80 ]
60001fe1000bdad00009037131210067
\_(1 0 2 1) /dev/sdd op:1 /dev/sdd [HSG80 ]
60001fe1000bdad000090371312100b3
\_(1 0 2 2) /dev/sde op:1 /dev/sde [HSG80 ]
60001fe1000bdad00009035071090024
\_(1 0 2 3) /dev/sdf op:1 /dev/sdf [HSG80 ]
600508b4000156d700012000000b0000
\_(1 0 3 1) /dev/sdg op:1 /dev/sdg [HSV110 (C)COMPAQ]
\_(1 0 6 1) /dev/sdi op:1 /dev/sdi [HSV110 (C)COMPAQ]
600508b4000156c30001200000210000
\_(1 0 3 2) /dev/sdh op:1 /dev/sdh [HSV110 (C)COMPAQ]
\_(1 0 6 2) /dev/sdj op:1 /dev/sdj [HSV110 (C)COMPAQ]
N|600508b4000156d700012000000b0000 : 0 4194304 multipath 2 2 10
round-robin 2 /dev/sdg 10 2 1 2 /dev/sdi 10 2 1 2
N|600508b4000156c30001200000210000 : 0 20971520 multipath 2 2 10
round-robin 2 /dev/sdh 10 2 1 2 /dev/sdj 10 2 1 2
xa-s03:~# dmsetup ls
600508b4000156c30001200000210000 (254, 1)
600508b4000156d700012000000b0000 (254, 0)
xa-s03:~# ll /dev/mapper/
total 0
brw------- 1 root root 254, 1 Dec 9 22:57
600508b4000156c30001200000210000
brw------- 1 root root 254, 0 Dec 9 22:57
600508b4000156d700012000000b0000
crw------- 1 root root 10, 63 Jul 25 22:48 control
xa-s03:~# dd if=/dev/mapper/600508b4000156c30001200000210000
of=/dev/null bs=1M count=500
500+0 records in
500+0 records out
524288000 bytes transferred in 5.662530 seconds (92589003 bytes/sec)
gee, that pretty fast :)
|
|
* update the Makefiles to autodetect libgcc.a & gcc includes
"ulibc-style". Factorisation of udevdirs & others niceties
* drop a hint about absent /dev/sd? on failed open() for poor Debian
users who don't imagine their favorite distro with only 16 preconfigured
SCSI device nodes :)
|
|
This patch updates scsi_id under udev from version 0.1 to version 0.2.
|
|
* implement a reschedule flag in /var/run. Last thing the prog do before
exit is check if a call to multipath was done (but canceled by
/var/run/multipath.run check) during its execution. If so restart the
main loop.
* implement a blacklist of sysfs bdev to not bother with for now (hd,
md, dm, sr, scd, ram, raw). This avoid sending SG_IO to unappropiate
devices.
Compiles & survive "while true;do (./multipath -v &);done"
|
|
* Adds a /var/run/multipath.run handling to avoid simultaneous runs.
* Remove a commented-out "printf"
|
|
here is the next update which brings this multipath to the state i'm not
ashamed of it being in udev :)
* drop a libdevmapper copy in extras/multipath; maybe discussions w/
Sistina folks will bring a better solution in the future.
* drop a putchar usage in libdevmapper to compile cleanly with klibc
* drop another such usage of my own in main.c
* massage the Makefile to compile libdevmapper against klibc
* use "ld" to produce the binary rather than "gcc -static"
* stop being stupid w/ uneeded major, minor & dev in main.c:dm_mk_node()
* reverse to creating striped target for now because the multipath
target is more hairy than expected initialy
* push the version code to 009 to be in synch w/ udev
builds & run here.
binary size is 43ko, which is fairly gratifying after all the efforts
I've put to compiling it with klibc :)
|
|
here is a clean-up patch :
* removes sg_err.[ch] deps
* makes sure the core code play nice with klibc
* port the sysfs calls to dlist helpers
* links against udev's sysfs (need libsysfs.a & dlist.a)
* finally define DM_TARGET as "multipath" as Joe posted the code today
(not tested yet)
* push version forward (do you want it in sync with udev version?)
libdevmapper doesn't play well with klibc, so I wasn't able to produce a
static binary yet. Help needed here ... as I don't want to fall back to
merge libdevmapper code in the core.
It compiles here and doesn't segfault.
|
|
|
|
<christophe.varoqui@free.fr>
|
