| Age | Commit message (Collapse) | Author |
|---|
|
The home and power buttons on the Cube iwork8 air tablet are swapped,
add a hwdb entry fixing this up.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Sometimes a system may have 2 input event nodes with the same name where
we only want to apply keyboard hwdb rules to 1 of the 2 devices.
This problem happens e.g. on devices where the soc_button_array driver is
used (e.g. intel atom based tablets) which registers 2 event nodes with
the name "gpio-keys".
This commit adds a new extended match rule which extends the match to also
check $attr{phys} and $attr{capabilities/ev}, allowing to differentiate
between devices with an identical name.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
mute button. (#5012)
|
|
Fixes #4938
|
|
|
|
|
|
Yubikeys and other pseudo keyboards require that they are in the US layout,
otherwise the data they send is invalid. Add two new keys to signal this to
processes that handles (XKB) layouts.
|
|
60-keyboard.rules was renamed to 60-evdev.rules in 51c0c2869
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Fixes #4728
|
|
Fixes: #4721
|
|
MS-1422) (#4696)
Add MSI VR420 (model MS-1422) to the list of MSI models which need to
ignore brightness hotkey presses, as these are already reported through
the acpi-video interface.
Bug-link: https://bugzilla.redhat.com/show_bug.cgi?id=1270124
Reported-by: David Dreggors <dadreggors@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Pavilion x360 13 (#4680)
|
|
Like the Inspiron 1520, the Dell Latitude 2110 emits brightness-control
key events both through atkbd and acpi-video. This suppresses them on
the atkbd side.
|
|
|
|
|
|
It's hard to say which one of the two mappings should stay. But the later
one would win (when both very present), and nobody complained, so let's
assume that that's the one.
|
|
It seems awkward to have both cases mixes. Note that the real parser
accepts both cases, and this only standarizes the usage in the systemd
database.
|
|
This way it's clear that the property block does not end at the comment.
The python checker will complain if this is not the case.
We had a few bugs before where two match blocks were merged by mistake,
and this change should help avoid that.
|
|
|
|
|
|
Added HP Folio 1040g2 Fn+F8 MICMUTE FIx
|
|
Fixes #2997
|
|
Apparently the vendor string for newer models now uses "svnHP" instead of
"svnHewlett-Packard", so add this alternative match to the global HP map.
Generalize matches for micmute key on ProBook 4xx.
Silence two hardwired keys on the ProBook 440 G3 that should not produce evdev
events. Thanks to Hermann Kraus for those! (See PR #2679)
|
|
https://launchpad.net/bugs/1535219
|
|
hwdb: remove references to udevadm info /dev/input/event*
|
|
Fixes #2343
|
|
This Lenovo machine use codec Line2 to implement a microphone mute
button, it depends on the unsolicited interrupt to generate key event,
the scan code for this button is assigned to 0x00 in the linux kernel
driver, and the keycode is KEY_MICMUTE(248), we need to remap this
keycode to KEY_F20 to make this hotkey work in X11.
BugLink: https://bugs.launchpad.net/bugs/1531362
Signed-off-by: Hui Wang <hui.wang@canonical.com>
|
|
|
|
|
|
Thanks to Olaf Hering!
|
|
The Yoga's firmware sends key events whenever it's being folded or unfolded.
These are thus *not* a button for requesting a screen orientation change, just
an indication that this already happened. Thus they should not be assigned to
"direction", but be ignored. Assigning them to "reserved" does not silence the
"unknown key pressed" kernel warning, so there's no point in maintaining a
mapping here.
Fixes #1440
|
|
Follow-up commit to e1fd19958: Add d8 scan code as well.
Fixes #1440
|
|
Fixes #1440
|
|
This breaks the same vendor/product ID with the German keyboard layout. As this
is a hack around some weird keyboard driver bug, let's revert until this is
understood better.
See https://github.com/systemd/systemd/issues/1243
This reverts commit a2aa71a9542492d6b34007b9dac28e4f10b4256d.
|
|
|
|
|
|
|
|
Unplugging and plugging in the cable will create various scancodes
on the keyboard controller.
Userspace within X should be able to interact with these to show
interesting messages. Assign them to generic prog1/prog2.
(David: add comment to hwdb explaining that these keycodes are reserved)
|
|
typo
keymap: Add Samsung NP350V and NP670Z
|
|
It does not generate a release event.
https://launchpad.net/bugs/1441849
|
|
This adds support for the keyboard illumination keys and fixes
Fn+F1.
|
|
Parse properties in the form
EVDEV_ABS_00="<min>:<max>:<res>:<fuzz>:<flat>"
and apply them to the kernel device. Future processes that open that device
will see the updated EV_ABS range.
This is particularly useful for touchpads that don't provide a resolution in
the kernel driver but can be fixed up through hwdb entries (e.g. bcm5974).
All values in the property are optional, e.g. a string of "::45" is valid to
set the resolution to 45.
The order intentionally orders resolution before fuzz and flat despite it
being the last element in the absinfo struct. The use-case for setting
fuzz/flat is almost non-existent, resolution is probably the most common case
we'll need.
To avoid multiple hwdb invocations for the same device, replace the
hwdb "keyboard:" prefix with "evdev:" and drop the separate 60-keyboard.rules
file. The new 60-evdev.rules is called for all event nodes
anyway, we don't need a separate rules file and second callout to the hwdb
builtin.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=89684
|
|
|
|
This reverts commit ba76ee29bc02879fb42c048132af8889b00220d5. As it turns
out, we need to match on driver=atkbd to not load the fixups on any
plugged USB devices.
That is, whenever you use "name:<name>:dmi:<dmi>" style matches, you
better provide a name or you're screwing things up.
|
|
|
|
Currently, we always run
hwdb 'keyboard:name:$attr{name}:$attr{[dmi/id]modalias}'
as last step to match keyboards. Therefore, if nothing else matched so
far, we still try the device-name+dmi combination.
However, we have a special atkbd rule which is only run for atkbd as:
hwdb 'keyboard:$attr{[dmi/id]modalias}'
This is redundant, as we already pass the same information to hwdb in the
last fallback step.
This patch converts the hwdb "keyboard:dmi:*" matches to
"keyboard:name:*:dmi:*" matches and drops the redundant rule.
|
|
There is no reason to match on usb-modaliases, if we can use the
input-modalias to achieve the same. This commit changes the
keyboard-lookups to not be restricted to USB, but pass all modaliases to
the hwdb. Furthermore, we convert all usb:* matches to input:* matches,
thus getting rid of any ambiguity if multiple usb devices are chained (or
a bluetooth device / etc. is on top).
Note that legacy keyboard:usb:* matches are still supported, but
deprecated. If possible, please use keyboard:input:* matches instead.
This is a required step to make other input devices work with
60-keyboard.hwdb. Other bus-types are often chained on usb and we want to
avoid any ambiguity here if we incorrectly match on a USB hub.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=84437
|
|
ThinkPad tablet firmware has DMI product name and version reversed:
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: LENOVO
Product Name: 7762AS1
Version: ThinkPad X61 Tablet
Serial Number: LKZCDH2
UUID: 6ADBC681-4FC9-11CB-844F-B47CB9210BE2
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: ThinkPad X61 Tablet
|
