summaryrefslogtreecommitdiff
path: root/man/journalctl.xml
AgeCommit message (Collapse)Author
2015-06-18man: revert dynamic paths for split-usr setupsTom Gundersen
This did not really work out as we had hoped. Trying to do this upstream introduced several problems that probably makes it better suited as a downstream patch after all. At any rate, it is not releaseable in the current state, so we at least need to revert this before the release. * by adjusting the path to binaries, but not do the same thing to the search path we end up with inconsistent man-pages. Adjusting the search path too would be quite messy, and it is not at all obvious that this is worth the effort, but at any rate it would have to be done before we could ship this. * this means that distributed man-pages does not make sense as they depend on config options, and for better or worse we are still distributing man pages, so that is something that definitely needs sorting out before we could ship with this patch. * we have long held that split-usr is only minimally supported in order to boot, and something we hope will eventually go away. So before we start adding even more magic/effort in order to make this work nicely, we should probably question if it makes sense at all.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-04-02man: don't mention "journalctl /dev/sda"Lennart Poettering
It never worked, and nobody ever worked on it, hence don't mention it.
2015-01-18man: mention "wheel" and "adm" in journalctl(1)Zbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=70866
2015-01-18man: reindent journalctl(1)Zbigniew Jędrzejewski-Szmek
Reindent with two spaces, use non-breaking spaces, add <literal> tags.
2014-11-03journalctl: add new --vacuum-size= and --vacuum-time= commands to clean up ↵Lennart Poettering
journal files based on a size/time limit This is equivalent to the effect of SystemMaxUse= and RetentionSec=, however can be invoked directly instead of implicitly.
2014-11-01man: explain journalctl --flush correctlyUmut Tezduyar Lindskog
2014-10-23journalctl: add new --flush command and make use of it in ↵Lennart Poettering
systemd-journal-flush.service This new command will ask the journal daemon to flush all log data stored in /run to /var, and wait for it to complete. This is useful, so that in case of Storage=persistent we can order systemd-tmpfiles-setup afterwards, to ensure any possibly newly created directory in /var/log gets proper access mode and owners.
2014-10-02journalctl: add --utc optionJan Synacek
Introduce option to display time in UTC.
2014-08-31journalctl: Allow to disable line cap with --lines=allJan Janssen
2014-08-21journalctl: add "-t --identifier=STRING" optionHarald Hoyer
This turns journalctl to the counterpart of systemd-cat. Messages sent with systemd-cat --identifier foo --prioritiy debug can now be shown with journalctl --identifier foo --prioritiy debug "--identifier" is not merged with "--unit" to make a clear distinction between syslog and systemd units. syslog identifiers can be chosen freely by anyone.
2014-08-20man: fix typosRonny Chevalier
2014-08-18man: mention that "units" are commonly system servicesLennart Poettering
Also, provide an example for -u.
2014-07-19journalctl,man: allow + only between termsZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1110712
2014-07-13man: add systemd-coredump(8) and a bunch of linksZbigniew Jędrzejewski-Szmek
2014-07-07man: add a mapping for external manpagesZbigniew Jędrzejewski-Szmek
It is annoying when we have dead links on fd.o. Add project='man-pages|die-net|archlinux' to <citerefentry>-ies. In generated html, add external links to http://man7.org/linux/man-pages/man, http://linux.die.net/man/, https://www.archlinux.org/. By default, pages in sections 2 and 4 go to man7, since Michael Kerrisk is the autorative source on kernel related stuff. The rest of links goes to linux.die.net, because they have the manpages. Except for the pacman stuff, since it seems to be only available from archlinux.org. Poor gummiboot gets no link, because gummitboot(8) ain't to be found on the net. According to common wisdom, that would mean that it does not exist. But I have seen Kay using it, so I know it does, and deserves to be found. Can somebody be nice and put it up somewhere?
2014-02-20man: xinclude --help/--version/--no-pagerZbigniew Jędrzejewski-Szmek
2014-02-17doc: resolve missing/extraneous words or inappropriate formsJan Engelhardt
Issues fixed: * missing words required by grammar * duplicated or extraneous words * inappropriate forms (e.g. singular/plural), and declinations * orthographic misspellings
2014-02-17doc: update punctuationJan Engelhardt
Resolve spotted issues related to missing or extraneous commas, dashes.
2014-02-12man: use xinclude to de-deduplicate common textZbigniew Jędrzejewski-Szmek
I only tested with python-lxml. I'm not sure if xml.etree should be deprecated.
2014-02-12pager: support SYSTEMD_LESS environment variableJason A. Donenfeld
This allows customization of the arguments used by less. The main motivation is that some folks might not like having --no-init on every invocation of less.
2014-01-11journalctl: allow globbing in --unit and --user-unitZbigniew Jędrzejewski-Szmek
This is a continuation of e3e0314b systemctl: allow globbing in commands which take multiple unit names. Multiple patterns can be specified, as separate arguments, or as one argument with patterns seperated by commas. If patterns are given, at least one unit must be matched (by any of the patterns). This is different behaviour than systemctl, but here it is necessary because otherwise anything would be matched, which is unlikely to be the intended behaviour. https://bugs.freedesktop.org/show_bug.cgi?id=59336
2013-12-25man: grammar and wording improvementsJan Engelhardt
This is a recurring submission and includes corrections to: - missing words, preposition choice. - change of /lib to /usr/lib, because that is what most distros are using as the system-wide location for systemd/udev files.
2013-12-25man: improvements to comma placementJan Engelhardt
This is a recurring submission and includes corrections to: comma placement.
2013-12-18man: add DOI for refereed article on Forward Secure Sealing to journald.conf(5)Jason St. John
In journalctl(1), be more explicit about the reference to "Seal=" in journald.conf(5) and what information can be found there.
2013-12-18man: be more explicit about option arguments that take 128-bit IDs in ↵Jason St. John
journalctl(1) It may not be immediately obvious to the reader what "ID128" is, so replace the example option argument "ID128" with "128-bit-ID".
2013-12-18man: fix grammar issues in journalctl(1)Jason St. John
And add a missing <option> tag around "--setup-keys" under "--force".
2013-12-16man: describe journalctl --show-cursorZbigniew Jędrzejewski-Szmek
2013-12-11journal: add ability to browse journals of running OS containersLennart Poettering
This adds the new library call sd_journal_open_container() and a new "-M" switch to journalctl. Particular care is taken that journalctl's "-b" switch resolves to the current boot ID of the container, not the host.
2013-10-28journalctl: add --list-boots to show boot IDs and timesZbigniew Jędrzejewski-Szmek
Suggested by David Wilkins <dwilkins@maths.tcd.ie> in https://bugzilla.redhat.com/show_bug.cgi?id=967521: > [Specific boot ID is a] bit of a palaver to obtain. I consulted the > verbose dump of the journal to discover the _BOOT_ID for the > timestamp, and then generated the journal dump for that boot using > journalctl _BOOT_ID=foo -o short-monotonic.
2013-10-15man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted. I guess I can just skip over reporting ubiquitous comma placement fixes…
2013-10-07journalctl: flip to --full by defaultZbigniew Jędrzejewski-Szmek
We already shew lines in full when using a pager or not on a tty. The commit disables ellipsization in the sole remaining case, namely when --follow is used. This has been a popular request for a long time, and indeed, full output seems much more useful. Old behaviour can still be requested by using --no-full. Old options retain their behaviour for compatiblity, but aren't advertised as much. This change applies only to jornalctl, not to systemctl, when ellipsization is useful to keep the layout. https://bugzilla.redhat.com/show_bug.cgi?id=984758
2013-09-24journalctl(1): s/adm/systemd-journal/Dave Reisner
2013-09-10man: wording and grammar updatesJan Engelhardt
This includes regularly-submitted corrections to comma setting and orthographical mishaps that appeared in man/ in recent commits. In this particular commit: - the usual comma fixes - expand contractions (this is prose)
2013-09-10man: add not to not use -x in bug reportsZbigniew Jędrzejewski-Szmek
2013-08-20logs-show: add short-precise mode with us timestampsZbigniew Jędrzejewski-Szmek
Also, always show us timestamps in verbose mode. https://bugzilla.redhat.com/show_bug.cgi?id=991678
2013-07-21man: wording and grammar updatesJan Engelhardt
This includes regularly-submitted corrections to comma setting and orthographical mishaps that appeared in man/ in recent commits.
2013-07-19man: Fix example to use the new --boot syntaxJan Janssen
2013-07-18journalctl: add ”short-iso” output format with verbose ISO8601 timestampsTomasz Torcz
Example: 2013-07-18T10:10:01+0200 sandworm CROND[20957]: (root) CMD (/usr/lib64/sa/sa1 1 1)
2013-07-17journalctl: remove ":" from the --boot syntaxZbigniew Jędrzejewski-Szmek
Instead of :-0, :1, :5, etc., use -0, 1 or +1, 5, etc. For BOOT_ID+OFFSET, use BOOT_ID+offset or BOOT_ID-offset (either + or - is required). Also make error handling a bit more robust and verbose. Modify the man page to describe the most common case (-b) first, and the second most common case (-b -1) second.
2013-07-16journalctl: augment short mode with a cursor at the endZbigniew Jędrzejewski-Szmek
Two options are added: --show-cursor to print the cursor at the end, and --after-cursor to resume logs on the next line after the previous one.
2013-07-16man: improve readability of --output options in journalctl(1)Jason St. John
The list and descriptions of valid output options was difficult to read, so break up the long block of text into discrete man page list items to improve readability.
2013-07-16journalctl: Add support for showing messages from a previous bootJan Janssen
Hi, I redid the boot ID look up to use enumerate_unique. This is quite fast if the cache is warm but painfully slow if it isn't. It has a slight chance of returning the wrong order if realtime clock jumps around. This one has to do n searches for every boot ID there is plus a sort, so it depends heavily on cache hotness. This is in contrast to the other way of look-up through filtering by a MESSAGE_ID, which only needs about 1 seek + whatever amount of relative IDs you want to walk. I also have a linked-list + (in-place) mergesort version of this patch, which has pretty much the same runtime. But since this one is using libc sorting and armortized allocation, I prefer this one. To summarize: The MESSAGE_ID way is a *lot* faster but can be incomplete due to rotation, while the enumerate+sort will find every boot ID out there but will be painfully slow for large journals and cold caches. You choose :P Jan
2013-07-15man: add note about paging and colors to journalctl(1)Zbigniew Jędrzejewski-Szmek
2013-07-14journalctl: add --force option to recreate FSSShawn Landden
2013-07-03man: more grammar improvementsJan Engelhardt
- place commas - expand contractions (this is written prose :) - add some missing words
2013-06-26man: always supply quotes around literalsZbigniew Jędrzejewski-Szmek
When manpages are displayed on a terminal, <literal>s are indistinguishable from surrounding text. Add quotes everywhere, remove duplicate quotes, and tweak a few lists for consistent formatting. https://bugzilla.redhat.com/show_bug.cgi?id=874631
2013-06-18journal: add references to SSKG paper FSS is based onLennart Poettering
2013-06-17journalctl,loginctl,systemctl,systemd-cgls: add -l as alias for --fullDaniel Albers
https://bugs.freedesktop.org/show_bug.cgi?id=65850
2013-06-10journalctl: allow the user to specify the file(s) to useZbigniew Jędrzejewski-Szmek
This is useful for debugging and feels pretty natural. For example answering the question "is this big .journal file worth keeping?" is made easier.