| Age | Commit message (Collapse) | Author |
|---|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
It never worked, and nobody ever worked on it, hence don't mention it.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=70866
|
|
Reindent with two spaces, use non-breaking spaces, add <literal> tags.
|
|
journal files based on a size/time limit
This is equivalent to the effect of SystemMaxUse= and RetentionSec=,
however can be invoked directly instead of implicitly.
|
|
|
|
systemd-journal-flush.service
This new command will ask the journal daemon to flush all log data
stored in /run to /var, and wait for it to complete. This is useful, so
that in case of Storage=persistent we can order systemd-tmpfiles-setup
afterwards, to ensure any possibly newly created directory in /var/log
gets proper access mode and owners.
|
|
Introduce option to display time in UTC.
|
|
|
|
This turns journalctl to the counterpart of systemd-cat.
Messages sent with
systemd-cat --identifier foo --prioritiy debug
can now be shown with
journalctl --identifier foo --prioritiy debug
"--identifier" is not merged with "--unit" to make a clear
distinction between syslog and systemd units.
syslog identifiers can be chosen freely by anyone.
|
|
|
|
Also, provide an example for -u.
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1110712
|
|
|
|
It is annoying when we have dead links on fd.o.
Add project='man-pages|die-net|archlinux' to <citerefentry>-ies.
In generated html, add external links to
http://man7.org/linux/man-pages/man, http://linux.die.net/man/,
https://www.archlinux.org/.
By default, pages in sections 2 and 4 go to man7, since Michael
Kerrisk is the autorative source on kernel related stuff.
The rest of links goes to linux.die.net, because they have the
manpages.
Except for the pacman stuff, since it seems to be only available from
archlinux.org.
Poor gummiboot gets no link, because gummitboot(8) ain't to be found
on the net. According to common wisdom, that would mean that it does
not exist. But I have seen Kay using it, so I know it does, and
deserves to be found. Can somebody be nice and put it up somewhere?
|
|
|
|
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
|
|
Resolve spotted issues related to missing or extraneous commas, dashes.
|
|
I only tested with python-lxml. I'm not sure if xml.etree should be
deprecated.
|
|
This allows customization of the arguments used by less. The main
motivation is that some folks might not like having --no-init on every
invocation of less.
|
|
This is a continuation of e3e0314b systemctl: allow globbing in commands
which take multiple unit names.
Multiple patterns can be specified, as separate arguments, or as one argument
with patterns seperated by commas.
If patterns are given, at least one unit must be matched (by any of the patterns).
This is different behaviour than systemctl, but here it is necessary because
otherwise anything would be matched, which is unlikely to be the intended
behaviour.
https://bugs.freedesktop.org/show_bug.cgi?id=59336
|
|
This is a recurring submission and includes corrections to:
- missing words, preposition choice.
- change of /lib to /usr/lib, because that is what most distros are
using as the system-wide location for systemd/udev files.
|
|
This is a recurring submission and includes corrections to:
comma placement.
|
|
In journalctl(1), be more explicit about the reference to "Seal=" in
journald.conf(5) and what information can be found there.
|
|
journalctl(1)
It may not be immediately obvious to the reader what "ID128" is, so replace the
example option argument "ID128" with "128-bit-ID".
|
|
And add a missing <option> tag around "--setup-keys" under "--force".
|
|
|
|
This adds the new library call sd_journal_open_container() and a new
"-M" switch to journalctl. Particular care is taken that journalctl's
"-b" switch resolves to the current boot ID of the container, not the
host.
|
|
Suggested by David Wilkins <dwilkins@maths.tcd.ie> in
https://bugzilla.redhat.com/show_bug.cgi?id=967521:
> [Specific boot ID is a] bit of a palaver to obtain. I consulted the
> verbose dump of the journal to discover the _BOOT_ID for the
> timestamp, and then generated the journal dump for that boot using
> journalctl _BOOT_ID=foo -o short-monotonic.
|
|
This is a recurring submission and includes corrections to various
issue spotted. I guess I can just skip over reporting ubiquitous comma
placement fixes…
|
|
We already shew lines in full when using a pager or not on a
tty. The commit disables ellipsization in the sole remaining case,
namely when --follow is used.
This has been a popular request for a long time, and indeed, full
output seems much more useful. Old behaviour can still be requested by
using --no-full. Old options retain their behaviour for compatiblity,
but aren't advertised as much. This change applies only to jornalctl,
not to systemctl, when ellipsization is useful to keep the layout.
https://bugzilla.redhat.com/show_bug.cgi?id=984758
|
|
|
|
This includes regularly-submitted corrections to comma setting and
orthographical mishaps that appeared in man/ in recent commits.
In this particular commit:
- the usual comma fixes
- expand contractions (this is prose)
|
|
|
|
Also, always show us timestamps in verbose mode.
https://bugzilla.redhat.com/show_bug.cgi?id=991678
|
|
This includes regularly-submitted corrections to comma setting and
orthographical mishaps that appeared in man/ in recent commits.
|
|
|
|
Example:
2013-07-18T10:10:01+0200 sandworm CROND[20957]: (root) CMD (/usr/lib64/sa/sa1 1 1)
|
|
Instead of :-0, :1, :5, etc., use -0, 1 or +1, 5, etc. For BOOT_ID+OFFSET,
use BOOT_ID+offset or BOOT_ID-offset (either + or - is required).
Also make error handling a bit more robust and verbose.
Modify the man page to describe the most common case (-b) first,
and the second most common case (-b -1) second.
|
|
Two options are added: --show-cursor to print the cursor at the end,
and --after-cursor to resume logs on the next line after the previous one.
|
|
The list and descriptions of valid output options was difficult to read,
so break up the long block of text into discrete man page list items to
improve readability.
|
|
Hi,
I redid the boot ID look up to use enumerate_unique.
This is quite fast if the cache is warm but painfully slow if
it isn't. It has a slight chance of returning the wrong order if
realtime clock jumps around.
This one has to do n searches for every boot ID there is plus
a sort, so it depends heavily on cache hotness. This is in contrast
to the other way of look-up through filtering by a MESSAGE_ID,
which only needs about 1 seek + whatever amount of relative IDs
you want to walk.
I also have a linked-list + (in-place) mergesort version of this
patch, which has pretty much the same runtime. But since this one
is using libc sorting and armortized allocation, I prefer this
one.
To summarize: The MESSAGE_ID way is a *lot* faster but can be
incomplete due to rotation, while the enumerate+sort will find
every boot ID out there but will be painfully slow for large
journals and cold caches.
You choose :P
Jan
|
|
|
|
|
|
- place commas
- expand contractions (this is written prose :)
- add some missing words
|
|
When manpages are displayed on a terminal, <literal>s are indistinguishable
from surrounding text. Add quotes everywhere, remove duplicate quotes,
and tweak a few lists for consistent formatting.
https://bugzilla.redhat.com/show_bug.cgi?id=874631
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=65850
|
|
This is useful for debugging and feels pretty natural. For example
answering the question "is this big .journal file worth keeping?"
is made easier.
|
