| Age | Commit message (Collapse) | Author |
|---|
|
In this mode, messages from processes which are not part of the session
land in the main journal file, and only output of processes which are
properly part of the session land in the user's journal. This is
confusing, in particular because systemd-coredump runs outside of the
login session.
"Deprecate" SplitMode=login by removing it from documentation, to
discourage people from using it.
|
|
Adressing https://github.com/systemd/systemd/issues/3755#issuecomment-234214273
|
|
We generally follow the rule that for time settings we suffix the setting name
with "Sec" to indicate the default unit if none is specified. The only
exception was the rate limiting interval settings. Fix this, and keep the old
names for compatibility.
Do the same for journald's RateLimitInterval= setting
|
|
|
|
|
|
Fixes #1441.
|
|
Implement a maximum limit on number of journal files to keep around.
Enforcing a limit is useful on this since our performance when viewing
pays a heavy penalty for each journal file to interleve. This setting is
turned on now by default, and set to 100.
Also, actully implement what 348ced909724a1331b85d57aede80a102a00e428
promised: use whatever we find on disk at startup as lower bound on how
much disk space we can use. That commit introduced some provisions to
implement this, but actually never did.
This also adds "journalctl --vacuum-files=" to vacuum files on disk by
their number explicitly.
|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1147651
|
|
For daemons which have a main configuration file, there's
little reason for the administrator to use configuration snippets.
They are useful for packagers which need to override settings, but
we shouldn't advertise that as the main way of configuring those
services.
https://bugs.freedesktop.org/show_bug.cgi?id=89397
|
|
|
|
|
|
In man journald.conf, removes reference to XZ as sole form of
compression. See commit d89c8fdf48c7bad5816b9f2e77e8361721f22517.
In man coredump.conf, clarifies that "Compression=" controls existence,
not type, of compression.
|
|
|
|
After all, rsyslog and friends nowadays read their data directly from
the journal, hence the forwarding is unnecessary in most cases.
|
|
Now that we actually can distuingish system and normal users there's no
point in taking session information into account anymore when splitting
up logs.
This has the beenfit with that coredump information will actually end up
in each user's own journal.
|
|
This brings the man page back into sync with the actual code.
|
|
This will let journald forward logs as messages sent to all logged in
users (like wall).
Two options are added:
* ForwardToWall (default yes)
* MaxLevelWall (default emerg)
'ForwardToWall' is overridable by kernel command line option
'systemd.journald.forward_to_wall'.
This is used to emulate the traditional syslogd behaviour of sending
emergency messages to all logged in users.
|
|
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
|
|
|
|
|
|
Before, journald would remove journal files until both MaxUse= and
KeepFree= settings would be satisfied. The first one depends (if set
automatically) on the size of the file system and is constant. But
the second one depends on current use of the file system, and a spike
in disk usage would cause journald to delete journal files, trying to
reach usage which would leave 15% of the disk free. This behaviour is
surprising for the user who doesn't expect his logs to be purged when
disk usage goes above 85%, which on a large disk could be some
gigabytes from being full. In addition attempting to keep 15% free
provides an attack vector where filling the disk sufficiently disposes
of almost all logs.
Instead, obey KeepFree= only as a limit on adding additional files.
When replacing old files with new, ignore KeepFree=. This means that
if journal disk usage reached some high point that at some later point
start to violate the KeepFree= constraint, journald will not add files
to go above this point, but it will stay (slightly) below it. When
journald is restarted, it forgets the previous maximum usage value,
and sets the limit based on the current usage, so if disk remains to
be filled, journald might use one journal-file-size less on each
restart, if restarts happen just after rotation. This seems like a
reasonable compromise between implementation complexity and robustness.
|
|
This is a recurring submission and includes corrections to:
word omissions and word class choice.
|
|
In journalctl(1), be more explicit about the reference to "Seal=" in
journald.conf(5) and what information can be found there.
|
|
This includes regularly-submitted corrections to comma setting and
orthographical mishaps that appeared in man/ in recent commits.
|
|
message
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=66657
|
|
- place commas
- expand contractions (this is written prose :)
- add some missing words
|
|
Reporting of the free space was bogus, since the remaining space
was compared with the maximum allowed, instead of the current
use being compared with the maximum allowed. Simplify and fix
by reporting limits directly at the point where they are calculated.
Also, assign a UUID to the message.
|
|
|
|
|
|
As some SSDs are still seeing performance degredation when
reaching 85% usage the default value of 5% seems a little low.
Set this to 15% by default.
|
|
Add option to force journal sync with fsync. Default timeout is 5min.
Interval configured via SyncIntervalSec option at journal.conf. Synced
journal files will be marked as OFFLINE.
Manual sync can be performed via sending SIGUSR1.
|
|
|
|
Alias as systemd-user.conf is also provided. This should help
users running systemd in session mode.
https://bugzilla.redhat.com/show_bug.cgi?id=690868
|
|
|
|
|
|
There's no point in making this configurable, so let's drop it in order
to simplify configuration a bit.
|
|
This also enables time-based rotation (but not vacuuming) after 1month,
so that not more one month of journal is lost at a time per vacuuming.
|
|
implements
|
|
|
|
|
|
|
|
|
|
"permanent" is simply the wrong term and we use "persistant" in most
other contexts to correct this.
|
|
|
