summaryrefslogtreecommitdiff
path: root/man/systemctl.xml
AgeCommit message (Collapse)Author
2015-01-19man: use one description of --no-legendZbigniew Jędrzejewski-Szmek
2015-01-19systemctl: fix import-environment description, trim help to 80 colsZbigniew Jędrzejewski-Szmek
2015-01-08man: remove references to systemadm from systemctl man pageLennart Poettering
The tool is badly maintained and we shouldn't refence such old cruft.
2015-01-08man: bring systemctl man page and --help text into the same orderLennart Poettering
2014-12-30man: Fix spellingSusant Sahani
2014-11-29systemctl: add edit verbRonny Chevalier
It helps editing units by either creating a drop-in file, like /etc/systemd/system/my.service.d/override.conf, or by copying the original unit from /usr/lib/systemd/ to /etc/systemd/ if the --full option is specified. It invokes an editor on temporary files related to the unit files and if the editor exited successfully, then it renames the temporary files to their original names (e.g. my.service or override.conf) and daemon-reload is invoked. If the temporary file is empty the modification is canceled. See https://bugzilla.redhat.com/show_bug.cgi?id=906824
2014-11-29man: update description of default extension for isolateChris Atkinson
2014-11-23man: reword list-dependencies descriptionZbigniew Jędrzejewski-Szmek
The previous version was a bit too vague. It is better to simply list all dependency types that are followed. Previous version also made an emphasis on dependencies introduced by configuration. But this command (or systemd) don't care about this distinction between configured and automatically added dependencies at all. This distinctionis removed from the main description, and an explanatory paragraph is added to remind the user that all dependencies are shown, no matter where they come from.
2014-11-21man: add emacs header to get correct indention in nxml-mode for the manpage ↵Lennart Poettering
XML files that use 2ch indenting In the long run we really should figure out if we want to stick with 8ch or 2ch indenting, and not continue with half-and-half. For now, just make emacs aware of the files that use 2ch indenting.
2014-11-10man: improve documentation for "indirect" unit file state a bitLennart Poettering
Also, correct mentions of "units" instead of "unit files" in the table, and terminate all sentences with a full stop.
2014-11-10shared/install: when unit contains only Also=, report 'indirect'Jan Synacek
If a unit contains only Also=, with no Alias= or WantedBy=, it shouldn't be reported as static. New 'indirect' status shall be introduced. https://bugzilla.redhat.com/show_bug.cgi?id=864298
2014-11-10man: don't refer to undocumented option '--failed'Michal Schmidt
2014-11-10man: don't document systemctl --failedLennart Poettering
This effectively reverts 599b6322f19ec619ddc294d0e7880b669040cf66, which in turn partially reverted 4dc5b821ae737914499119e29811fc3346e3d97c. The --failed switch is not documented on purpose, since it is redundant due to --state=failed, which it predates. Due to that it's not documented in --help either. We generally try to avoid redundant interfaces, but if we need to keep them for compatibility we do so, however remove them from documentation to ensure they are not used in future. The man page is now changed to include a comment about the fact that --failed is not documented on purpose. Also, explicitly mention --state=failed as example for --state.
2014-11-07man: document --failedZbigniew Jędrzejewski-Szmek
https://bugs.debian.org/767267
2014-10-28man: minor corrections on how the overall system states are actually definedLennart Poettering
2014-10-27man: add table of manager statesZbigniew Jędrzejewski-Szmek
2014-10-08man/systemctl: document enable on masked unitsJan Synacek
2014-10-08systemctl: add add-wants and add-requires verbsLukas Nykryn
2014-09-04man: make it more clear that the concepts systemctl(1) manage are introduced ↵Lennart Poettering
in systemd(1) Based on a suggestion of Ken Coar.
2014-08-20man: fix typosRonny Chevalier
2014-08-15man: drop references to removed and obsolete 'systemctl load' commandLennart Poettering
2014-07-23docs: remove repeating words from man/*xmlKarel Zak
2014-07-07man: add a mapping for external manpagesZbigniew Jędrzejewski-Szmek
It is annoying when we have dead links on fd.o. Add project='man-pages|die-net|archlinux' to <citerefentry>-ies. In generated html, add external links to http://man7.org/linux/man-pages/man, http://linux.die.net/man/, https://www.archlinux.org/. By default, pages in sections 2 and 4 go to man7, since Michael Kerrisk is the autorative source on kernel related stuff. The rest of links goes to linux.die.net, because they have the manpages. Except for the pacman stuff, since it seems to be only available from archlinux.org. Poor gummiboot gets no link, because gummitboot(8) ain't to be found on the net. According to common wisdom, that would mean that it does not exist. But I have seen Kay using it, so I know it does, and deserves to be found. Can somebody be nice and put it up somewhere?
2014-06-28doc: grammatical correctionsJan Engelhardt
2014-06-25systemctl: add new "is-system-running" command to check whether system is ↵Lennart Poettering
fully up https://bugs.freedesktop.org/show_bug.cgi?id=66926
2014-06-17install: beef up preset logic to limit to only enable or only disable, and ↵Lennart Poettering
do all-unit preset operations The new "systemctl preset-all" command may now be used to put all installed units back into the enable/disable state the vendor/admin encoded in preset files. Also, introduce "systemctl --preset-mode=enable-only" and "systemctl --preset-mode=disable-only" to only apply the enable or only the disable operations of a "systemctl preset" or "systemctl preset-all" operation. "systemctl preset-all" implements this RFE: https://bugzilla.redhat.com/show_bug.cgi?id=630174
2014-06-09man: clarify the effect of replace-irreversibly on future conflicting jobsDavid Strauss
2014-05-15Fix typos in systemctl manpageEelco Dolstra
2014-05-07doc: comma placement corrections and word orderJan Engelhardt
Set commas where there should be some. Some improvements to word order.
2014-05-07doc: corrections to words and formsJan Engelhardt
This patch exchange words which are inappropriate for a situation, deletes duplicated words, and adds particles where needed.
2014-03-25systemctl: add more verbose explanation of --kill-who and what control/main ↵Lennart Poettering
processes are
2014-03-25systemctl: --kill-mode is long long gone, don't mention it in the man pageLennart Poettering
2014-03-17man: improve wording of systemctl's --after/--beforeJason St. John
Commit 4a77ca7 was an attempt at fixing the wording of --after and --before, but the new wording was unclear. Split the combined --after/--before section into a separate section for each, explicitly state what each option does, and add information about how these lists are generated. Reported-by: Andrey Borzenkov <arvidjaar@gmail.com> Reported-by: Lennart Poettering <lennart@poettering.net>
2014-03-17systemctl: introduce -r switch to show units running in local containers in ↵Lennart Poettering
addition to the host
2014-03-12systemctl: when "systemctl status" is called without arguments show a short ↵Lennart Poettering
overall system state Previously "systemctl status" without argument would print the status of all loaded units. This has now been moved to "systemctl status -a".
2014-03-12systemctl: add new "list-machines" commandLennart Poettering
"systemctl list-machines" shows one line per local container which includes the current system state of the container, the number of failed units as well as the number of currently queued jobs.
2014-03-11man: fix description of systemctl --after/--beforeAndrey Borzenkov
It was backward - --after fetches After property, so units shown really come *before* unit given as argument. Same for --before.
2014-02-20man: xinclude --host/--machineZbigniew Jędrzejewski-Szmek
As usual, those common options are pushed to the end.
2014-02-20man: xinclude --user/--systemZbigniew Jędrzejewski-Szmek
2014-02-20man: xinclude --help/--version/--no-pagerZbigniew Jędrzejewski-Szmek
2014-02-17doc: resolve missing/extraneous words or inappropriate formsJan Engelhardt
Issues fixed: * missing words required by grammar * duplicated or extraneous words * inappropriate forms (e.g. singular/plural), and declinations * orthographic misspellings
2014-02-17doc: update punctuationJan Engelhardt
Resolve spotted issues related to missing or extraneous commas, dashes.
2014-02-14man: replace STDOUT with standard output, etc.Zbigniew Jędrzejewski-Szmek
Actually 'STDOUT' is something that doesn't appear anywhere: in the stdlib we have 'stdin', and there's only the constant STDOUT_FILENO, so there's no reason to use capitals. When refering to code, STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in other places they are replaced with normal phrases like standard output, etc.
2014-02-14man: always place <programlisting> and </programlisting> in a line with ↵Lennart Poettering
actual sources, so that we don't get spurious newlines in the man page output
2014-02-12man: use xinclude to de-deduplicate common textZbigniew Jędrzejewski-Szmek
I only tested with python-lxml. I'm not sure if xml.etree should be deprecated.
2014-02-12pager: support SYSTEMD_LESS environment variableJason A. Donenfeld
This allows customization of the arguments used by less. The main motivation is that some folks might not like having --no-init on every invocation of less.
2014-01-15systemctl: introduce new "import-environment" commandLennart Poettering
This may be used in graphical session start-up scripts to upload environment variables such as $DISPLAY into the systemd manager easily.
2013-12-26systemctl: allow globbing in commands which take multiple unit namesZbigniew Jędrzejewski-Szmek
2013-12-26man: fix description of is-enabled returned valueZbigniew Jędrzejewski-Szmek
2013-12-25man: grammar and wording improvementsJan Engelhardt
This is a recurring submission and includes corrections to: - missing words, preposition choice. - change of /lib to /usr/lib, because that is what most distros are using as the system-wide location for systemd/udev files.