summaryrefslogtreecommitdiff
path: root/man/systemctl.xml
AgeCommit message (Collapse)Author
2013-09-27man: drop references to "cgroup" wher appropriateLennart Poettering
Since cgroups are mostly now an implementation detail of systemd lets deemphasize it a bit in the man pages. This renames systemd.cgroup(5) to systemd.resource-control(5) and uses the term "resource control" rather than "cgroup" where appropriate. This leaves the word "cgroup" in at a couple of places though, like for example systemd-cgtop and systemd-cgls where cgroup stuff is at the core of what is happening.
2013-09-19man: mention --runtime where appropriateZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1009956
2013-09-12man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted. I guess I can just skip over reporting ubiquitous comma placement fixes… Highligts in this particular commit: - the "unsigned" type qualifier is completed to form a full type "unsigned int" - alphabetic -> lexicographic (that way we automatically define how numbers get sorted)
2013-09-10man: split systemctl commands to sectionsLukas Nykryn
2013-08-23man: Small grammar fixZbigniew Jędrzejewski-Szmek
Use Oxford comma.
2013-07-26systemctl.8: fix typo in SEE ALSODave Reisner
2013-07-26systemctl: remove "load" commandLennart Poettering
"systemctl load" has always been racy since the GC could hit any time, before making use of the loaded unit. Very recent systemd will run GC immeidately after all unit state changes which has the effect that the the effect of "systemctl load" is completely gone now, so let's remove the support for it in "systemctl" for good.
2013-07-26systemctl: move set-log-level to systemd-analyzeLennart Poettering
"systemctl set-log-level" is a command for analysis and tracing hence "systemd-analyze" should be the better home for it, thus allowing us to make the overly large "systemctl" a bit smaller.
2013-07-26systemctl: move "dump" command from systemctl to systemd-analyzeLennart Poettering
It's an analysis command and its format is explicitly not covered by any stability guarantees, hence move away from systemctl and into systemd-analyze, minimizing the already large interface of systemctl a bit. This patch also adds auto-paging to the various systemd-analyze commands where that makes sense
2013-07-21man: wording and grammar updatesJan Engelhardt
This includes regularly-submitted corrections to comma setting and orthographical mishaps that appeared in man/ in recent commits.
2013-07-19man: update documentation of systemctl cgroup commandsLennart Poettering
2013-07-18systemctl: option to list units by stateMaciej Wereski
This allows to show only units with specified LOAD or SUB or ACTIVE state.
2013-07-09man: wording and grammar updatesJan Engelhardt
2013-07-06man: document machinectl and systemd-machinedZbigniew Jędrzejewski-Szmek
2013-07-02man: add more formatting markupZbigniew Jędrzejewski-Szmek
2013-07-02man: improve grammar and word formatting in numerous man pagesJason St. John
Use proper grammar, word usage, adjective hyphenation, commas, capitalization, spelling, etc. To improve readability, some run-on sentences or sentence fragments were revised. [zj: remove the space from 'file name', 'host name', and 'time zone'.]
2013-06-17journalctl,loginctl,systemctl,systemd-cgls: add -l as alias for --fullDaniel Albers
https://bugs.freedesktop.org/show_bug.cgi?id=65850
2013-05-30systemctl: add command set-log-levelVáclav Pavlín
Command changes current log level
2013-05-30systemctl: add commands set-default and get-defaultVáclav Pavlín
systemctl set-default NAME links the default.target to the given unit, get-default prints out the path to the currently set default target.
2013-05-03Spelling fixesVille Skyttä
2013-05-03systemctl: add --plain option to list-dependenciesLukas Nykryn
This patch adds more script-friendly output for list-dependencies.
2013-04-24systemctl: show reverse dependencies or before/after orderingZbigniew Jędrzejewski-Szmek
Also update completion scripts a bit.
2013-04-18systemctl: drop usage of "internally loaded modules"Lennart Poettering
I wouldn't know what "internally" is supposed to mean hear, and we use this terminology in this context nowhere else, so let's drop this.
2013-04-17systemctl: clarify usage of "--all" versus list-unit-filesHarald Hoyer
Novice users might think, that $ systemctl --all is equal to $ systemctl list-unit-files https://bugzilla.redhat.com/show_bug.cgi?id=748512
2013-04-15Fix spelling errors using 'codespell' toolAnatol Pomozov
2013-04-12systemctl: new verb 'list-sockets'Zbigniew Jędrzejewski-Szmek
LISTEN UNIT ACTIVATES /dev/initctl systemd-initctl.socket systemd-initctl.service /dev/log systemd-journald.socket systemd-journald.service ... [::]:19531 systemd-journal-gatewayd.socket systemd-journal-gatewayd.service kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service 17 sockets listed. Pass --all to see loaded but inactive sockets, too.
2013-04-11systemctl: allow multiple arguments to --typeZbigniew Jędrzejewski-Szmek
This mirrors --property, and is generally useful. New functionality is used in bash completion. In case of zsh completion, new functionality is less useful because of caching. Nevertheless, zsh completion for restart is made to behave more-or-less the same as bash completion. At least sockets can be restarted.
2013-02-28man: clarify systemctl --property= documentation a bitLennart Poettering
2013-02-27man: document the new systemctl cgroup commandsLennart Poettering
2013-02-22systemctl: make shutdown operations use irreversible jobsMichal Schmidt
Occasionally people report problem with reboot/poweroff operations hanging in the middle. One known cause is when a new transaction to start a unit is enqueued while the shutdown is going on. The start of the unit conflicts with the shutdown jobs, so they get cancelled. The failure case can be quite unpleasant, becase getty and sshd may already be stopped. Fix it by using irreversible jobs for shutdown (reboot/poweroff/...) actions. This applies to commands like "reboot", "telinit 6", "systemctl reboot". Should someone desire to use reversible jobs, they can say "systemctl start reboot.target".`
2013-02-22core, systemctl: add support for irreversible jobsMichal Schmidt
Add a new job mode: replace-irreversibly. Jobs enqueued using this mode cannot be implicitly canceled by later enqueued conflicting jobs. They can however still be canceled with an explicit "systemctl cancel" call.
2013-02-22systemctl: make "systemctl default" use "isolate" job modeMichal Schmidt
"systemctl default" should behave identically to "telinit N" (where N is the corresponding runlevel target number), therefore it should use isolate job mode too.
2013-02-16systemctl: allow comma sepearted property listsZbigniew Jędrzejewski-Szmek
2013-02-16man: prettify systemctl(1)Zbigniew Jędrzejewski-Szmek
- reindent with two spaces, otherwise everything is squeezed near the right margin, - mark only optional arguments as optional, - some typos, etc.
2013-02-16systemctl: allow status with no unitsZbigniew Jędrzejewski-Szmek
This makes 'status' behave like 'list-units': systemctl status -> status of all units systemctl -t error status -> status of error units systemctl -t mount status -> etc.
2013-02-13Move systemctl dot to systemd-analyze dotSimon Peeters
2013-02-13man: Make options consistentWilliam Giokas
Option listings seemed to be pretty much random, some were short opt, long opt, others were long opt, short opt. This just makes every option with a short and long opt that I could find in the order short opt, long opt, for formatting's sake.
2013-01-26man: extend systemd.directives(7) to all manual pagesZbigniew Jędrzejewski-Szmek
New sections are added: PAM options, crypttab options, commandline options, miscellaneous. The last category will be used for all untagged <varname> elements. Commandline options sections is meant to be a developer tool: when adding an option it is sometimes useful to be able to check if similarly named options exist elsewhere.
2013-01-18systemctl: make list-dependencies default to default.targetLennart Poettering
2013-01-17systemctl add command list-dependenciesLukas Nykryn
systemctl list-dependencies lists all unit's dependecies and recursively expands all subsidiary target units into a tree. Primary purpose for this command is to show all units which are enabled in specified target.
2013-01-16systemctl,loginctl,cgls: do not ellipsize cgroup members when --full is ↵Lukas Nykryn
specified New file output.h with output flags and modes. --full parameter also for cgls and loginctl. Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup, show_cgroup_and_extra, show_cgroup_and_extra_by_spec). get_process_cmdline with max_length == 0 will not ellipsize output. Replace LINE_MAX with 0 in some calls of get_process_cmdline. [zj: Default to --full when under pager for clgs. Drop '-f' since it wasn't documented and didn't actually work. Reindent a bit. ]
2013-01-11systemctl: honour inhibitors when shutting down or entering sleep stateLennart Poettering
2013-01-04systemctl: add is-failedThomas Hindoe Paaboel Andersen
Adds is-failed to join is-active and is-enabled. I grabbed this one from the todo list. Most of the functionality was already there for is-active. I just needed to make check_one_unit take the states to check for as an argument instead of the hardcoded "active" and "reloading". is-failed will return 1 if none of the units given are failed. This is different from is-active which will return 3 if none of the units given are active. It returns 3 with this comment: /* According to LSB: "program is not running" */ As that does not make sense when looking for failed units I simply chose 1 instead.
2012-11-15systemctl: add help for --type/-tZbigniew Jędrzejewski-Szmek
The list of types and load states if lengthy, so a little reminder can be sometimes useful.
2012-10-31man: explain a bit more detailed what happens on suspendLennart Poettering
2012-10-28logind: support for hybrid sleep (i.e. suspend+hibernate at the same time)Lennart Poettering
2012-10-26man: typo fixesThomas Hindoe Paaboel Andersen
https://bugs.freedesktop.org/show_bug.cgi?id=55890 Fixed typos, serial comma, and removed "either" as there were more than two options. Also did an extra rename of "system-shutdown" to "systemd-shutdown" that was forgotten in commit 8bd3b8620c80d0f2383f2fb04315411fc8077ca1
2012-10-19systemctl: remove --follow optionLennart Poettering
Given that "journalctl -u" exists now there's no need to duplicate this functionality in systemctl, so let's drop this, especially given that it always felt a bit awkward to overload "-f" to both --force and --follow, and to have continues output with a status header for this. systemctl status -f avahi-daemon now becomes: journalctl -fu avahi-daemon Which is shorter and a lot less redundant.
2012-09-13man: fix a bunch of typos in docsThomas Hindoe Paaboel Andersen
https://bugs.freedesktop.org/show_bug.cgi?id=54501
2012-07-26systemd: enable/disable instances of templateMichal Sekletar
https://bugzilla.redhat.com/show_bug.cgi?id=752774