summaryrefslogtreecommitdiff
path: root/man/systemd-analyze.xml
AgeCommit message (Collapse)Author
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-03-13man: fix a bunch of linksZbigniew Jędrzejewski-Szmek
All hail linkchecker!
2015-02-16analyze: change behaviour of combined --to/from--patternZbigniew Jędrzejewski-Szmek
We would require a match against all three: patterns specified with --to, with --from, and as positional arguments to show an edge. This does not seem useful. Let instead the positional args behave like they were specified in both --to and --from, which is fairly intuitive and should be more useful.
2015-02-03Reindent man pages to 2chZbigniew Jędrzejewski-Szmek
2015-01-08doc: fix stale references to systemd-verifyDave Reisner
This was subsumed into systemd-analyze back in 142c4ecaa98.
2014-07-21man: merge systemd-verify with systemd-analyzeZbigniew Jędrzejewski-Szmek
2014-02-20man: xinclude --host/--machineZbigniew Jędrzejewski-Szmek
As usual, those common options are pushed to the end.
2014-02-20man: xinclude --help/--version/--no-pagerZbigniew Jędrzejewski-Szmek
2014-02-12man: use xinclude to de-deduplicate common textZbigniew Jędrzejewski-Szmek
I only tested with python-lxml. I'm not sure if xml.etree should be deprecated.
2014-02-12pager: support SYSTEMD_LESS environment variableJason A. Donenfeld
This allows customization of the arguments used by less. The main motivation is that some folks might not like having --no-init on every invocation of less.
2013-12-25man: improvements to comma placementJan Engelhardt
This is a recurring submission and includes corrections to: comma placement.
2013-11-07man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted: comma setting, missing words/preposition choice.
2013-11-06analyze: port over to use bus_open_transport()Lennart Poettering
2013-09-12man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted. I guess I can just skip over reporting ubiquitous comma placement fixes… Highligts in this particular commit: - the "unsigned" type qualifier is completed to form a full type "unsigned int" - alphabetic -> lexicographic (that way we automatically define how numbers get sorted)
2013-08-22man: typoZbigniew Jędrzejewski-Szmek
ohsix> ooh theres a typo in the example
2013-07-26systemctl: move set-log-level to systemd-analyzeLennart Poettering
"systemctl set-log-level" is a command for analysis and tracing hence "systemd-analyze" should be the better home for it, thus allowing us to make the overly large "systemctl" a bit smaller.
2013-07-26systemctl: move "dump" command from systemctl to systemd-analyzeLennart Poettering
It's an analysis command and its format is explicitly not covered by any stability guarantees, hence move away from systemctl and into systemd-analyze, minimizing the already large interface of systemctl a bit. This patch also adds auto-paging to the various systemd-analyze commands where that makes sense
2013-07-02man: improve grammar and word formatting in numerous man pagesJason St. John
Use proper grammar, word usage, adjective hyphenation, commas, capitalization, spelling, etc. To improve readability, some run-on sentences or sentence fragments were revised. [zj: remove the space from 'file name', 'host name', and 'time zone'.]
2013-06-26man: always supply quotes around literalsZbigniew Jędrzejewski-Szmek
When manpages are displayed on a terminal, <literal>s are indistinguishable from surrounding text. Add quotes everywhere, remove duplicate quotes, and tweak a few lists for consistent formatting. https://bugzilla.redhat.com/show_bug.cgi?id=874631
2013-06-14man: update systemd-analyze invocationZbigniew Jędrzejewski-Szmek
2013-04-26systemd-analyse: add "critical-chain" commandHarald Hoyer
"critical-chain" prints a tree of the critical chain of units $ ./systemd-analyze critical-chain graphical.target @1.226s └─multi-user.target @1.226s └─nfs-lock.service @961ms +265ms └─rpcbind.service @958ms +1ms └─network.target @957ms └─NetworkManager.service @434ms +522ms └─basic.target @428ms └─sockets.target @428ms └─dbus.socket @428ms └─sysinit.target @427ms └─systemd-tmpfiles-setup.service @411ms +15ms └─local-fs.target @410ms └─boot-efi.automount @410ms └─boot.mount @397ms +9ms └─local-fs-pre.target @192ms └─systemd-udevd.service @187ms +5ms └─systemd-udevd-control.socket @140ms └─-.mount With the "--fuzz=<ms>" parameter one can display more units around the critical units. $ ./systemd-analyze --fuzz=10ms critical-chain └─multi-user.target @1.226s └─nfs-lock.service @961ms +265ms ├─rpcbind.service @958ms +1ms │ └─network.target @957ms │ └─NetworkManager.service @434ms +522ms │ ├─basic.target @428ms │ │ ├─sockets.target @428ms │ │ │ ├─dbus.socket @428ms │ │ │ │ └─sysinit.target @427ms │ │ │ │ ├─systemd-tmpfiles-setup.service @411ms +15ms │ │ │ │ │ └─local-fs.target @410ms │ │ │ │ │ └─boot-efi.automount @410ms │ │ │ │ │ └─boot.mount @397ms +9ms │ │ │ │ │ └─local-fs-pre.target @192ms │ │ │ │ │ └─systemd-udevd.service @187ms +5ms │ │ │ │ │ ├─systemd-udevd-control.socket @140ms │ │ │ │ │ │ └─-.mount │ │ │ │ │ └─systemd-udevd-kernel.socket @140ms │ │ │ │ └─swap.target @421ms │ │ │ │ └─dev-disk-by\x2duuid-....swap @414ms +6ms │ │ │ │ └─systemd-journald.socket │ │ │ ├─rpcbind.socket @428ms │ │ │ └─cups.socket @428ms │ │ ├─paths.target @428ms │ │ │ └─cups.path @428ms │ │ ├─timers.target @427ms │ │ │ └─systemd-tmpfiles-clean.timer @427ms │ │ └─sysinit.target @427ms │ │ └─... │ └─dbus.socket @428ms │ └─... └─network.target @957ms └─...
2013-04-08analyze: various cleanupsLennart Poettering
2013-04-08systemd-analyze: filter dot outputŁukasz Stelmach
Make "systemd-analyze dot" output only lines with units matching given glob(7) patterns. Add --from-pattern and --to-pattern options. Without any patterns all relationships are printed as before. A relationship must match the follwing expression: (isempty(from) || from[0] || from[1] || .. || from[n]) && (isempty(to) || to[0] || to[1] || .. || to[n]) && (isempty(P) || P[0] || P[1] || ... || P[n]) where from[] and to[] are lists of patterns provided with subsequent --from-pattern and --to-pattern respectively. P[] is a list of additional patterns provided after the "dot" subcommand.
2013-02-13Move systemctl dot to systemd-analyze dotSimon Peeters
2012-06-27man: typo in systemd-analyze.xmlShawn Landden
2012-06-27man: write man page for systemd-analyzeLennart Poettering