| Age | Commit message (Collapse) | Author |
|---|
|
This should make it easier for users to understand what each filter
means as the list of syscalls is updated in subsequent systemd versions.
|
|
SYSTEMD_UNIT_PATH=foobar: systemd-analyze verify barbar/unit.service
will load units from barbar/, foobar/, /etc/systemd/system/, etc.
SYSTEMD_UNIT_PATH= systemd-analyze verify barbar/unit.service
will load units only from barbar/, which is useful e.g. when testing
systemd's own units on a system with an older version of systemd installed.
|
|
As discussed at systemd.conf 2015 and on also raised on the ML:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html
This removes the two XyzOverridable= unit dependencies, that were
basically never used, and do not enhance user experience in any way.
Most folks looking for the functionality this provides probably opt for
the "ignore-dependencies" job mode, and that's probably a good idea.
Hence, let's simplify systemd's dependency engine and remove these two
dependency types (and their inverses).
The unit file parser and the dbus property parser will now redirect
the settings/properties to result in an equivalent non-overridable
dependency. In the case of the unit file parser we generate a warning,
to inform the user.
The dbus properties for this unit type stay available on the unit
objects, but they are now hidden from usual introspection and will
always return the empty list when queried.
This should provide enough compatibility for the few unit files that
actually ever made use of this.
|
|
|
|
It's already documented in prose, now add it to the synopsis too.
|
|
rhbz#1268336
|
|
We already have the property writable, hence let's add a command to set
it.
|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
All hail linkchecker!
|
|
We would require a match against all three: patterns specified
with --to, with --from, and as positional arguments to show an
edge. This does not seem useful. Let instead the positional args
behave like they were specified in both --to and --from, which is
fairly intuitive and should be more useful.
|
|
|
|
This was subsumed into systemd-analyze back in 142c4ecaa98.
|
|
|
|
As usual, those common options are pushed to the end.
|
|
|
|
I only tested with python-lxml. I'm not sure if xml.etree should be
deprecated.
|
|
This allows customization of the arguments used by less. The main
motivation is that some folks might not like having --no-init on every
invocation of less.
|
|
This is a recurring submission and includes corrections to:
comma placement.
|
|
This is a recurring submission and includes corrections to various
issue spotted: comma setting, missing words/preposition choice.
|
|
|
|
This is a recurring submission and includes corrections to various
issue spotted. I guess I can just skip over reporting ubiquitous
comma placement fixes…
Highligts in this particular commit:
- the "unsigned" type qualifier is completed to form a full type
"unsigned int"
- alphabetic -> lexicographic (that way we automatically define how
numbers get sorted)
|
|
ohsix> ooh theres a typo in the example
|
|
"systemctl set-log-level" is a command for analysis and tracing hence
"systemd-analyze" should be the better home for it, thus allowing us to
make the overly large "systemctl" a bit smaller.
|
|
It's an analysis command and its format is explicitly not covered by any
stability guarantees, hence move away from systemctl and into
systemd-analyze, minimizing the already large interface of systemctl a
bit.
This patch also adds auto-paging to the various systemd-analyze commands
where that makes sense
|
|
Use proper grammar, word usage, adjective hyphenation, commas,
capitalization, spelling, etc.
To improve readability, some run-on sentences or sentence fragments were
revised.
[zj: remove the space from 'file name', 'host name', and 'time zone'.]
|
|
When manpages are displayed on a terminal, <literal>s are indistinguishable
from surrounding text. Add quotes everywhere, remove duplicate quotes,
and tweak a few lists for consistent formatting.
https://bugzilla.redhat.com/show_bug.cgi?id=874631
|
|
|
|
"critical-chain" prints a tree of the critical chain of units
$ ./systemd-analyze critical-chain
graphical.target @1.226s
└─multi-user.target @1.226s
└─nfs-lock.service @961ms +265ms
└─rpcbind.service @958ms +1ms
└─network.target @957ms
└─NetworkManager.service @434ms +522ms
└─basic.target @428ms
└─sockets.target @428ms
└─dbus.socket @428ms
└─sysinit.target @427ms
└─systemd-tmpfiles-setup.service @411ms +15ms
└─local-fs.target @410ms
└─boot-efi.automount @410ms
└─boot.mount @397ms +9ms
└─local-fs-pre.target @192ms
└─systemd-udevd.service @187ms +5ms
└─systemd-udevd-control.socket @140ms
└─-.mount
With the "--fuzz=<ms>" parameter one can display more units around
the critical units.
$ ./systemd-analyze --fuzz=10ms critical-chain
└─multi-user.target @1.226s
└─nfs-lock.service @961ms +265ms
├─rpcbind.service @958ms +1ms
│ └─network.target @957ms
│ └─NetworkManager.service @434ms +522ms
│ ├─basic.target @428ms
│ │ ├─sockets.target @428ms
│ │ │ ├─dbus.socket @428ms
│ │ │ │ └─sysinit.target @427ms
│ │ │ │ ├─systemd-tmpfiles-setup.service @411ms +15ms
│ │ │ │ │ └─local-fs.target @410ms
│ │ │ │ │ └─boot-efi.automount @410ms
│ │ │ │ │ └─boot.mount @397ms +9ms
│ │ │ │ │ └─local-fs-pre.target @192ms
│ │ │ │ │ └─systemd-udevd.service @187ms +5ms
│ │ │ │ │ ├─systemd-udevd-control.socket @140ms
│ │ │ │ │ │ └─-.mount
│ │ │ │ │ └─systemd-udevd-kernel.socket @140ms
│ │ │ │ └─swap.target @421ms
│ │ │ │ └─dev-disk-by\x2duuid-....swap @414ms +6ms
│ │ │ │ └─systemd-journald.socket
│ │ │ ├─rpcbind.socket @428ms
│ │ │ └─cups.socket @428ms
│ │ ├─paths.target @428ms
│ │ │ └─cups.path @428ms
│ │ ├─timers.target @427ms
│ │ │ └─systemd-tmpfiles-clean.timer @427ms
│ │ └─sysinit.target @427ms
│ │ └─...
│ └─dbus.socket @428ms
│ └─...
└─network.target @957ms
└─...
|
|
|
|
Make "systemd-analyze dot" output only lines with units matching
given glob(7) patterns. Add --from-pattern and --to-pattern options.
Without any patterns all relationships are printed as before.
A relationship must match the follwing expression:
(isempty(from) || from[0] || from[1] || .. || from[n]) &&
(isempty(to) || to[0] || to[1] || .. || to[n]) &&
(isempty(P) || P[0] || P[1] || ... || P[n])
where from[] and to[] are lists of patterns provided with subsequent
--from-pattern and --to-pattern respectively. P[] is a list of additional
patterns provided after the "dot" subcommand.
|
|
|
|
|
|
|
