| Age | Commit message (Collapse) | Author |
|---|
|
This change documents the existance of the systemd-nspawn@.service template
unit file, which was previously not mentioned at all. Since the unit file uses
slightly different default than nspawn invoked from the command line, these
defaults are now explicitly documented too.
A couple of further additions and changes are made, too.
Replaces: #3497
|
|
This the patch implements a notificaiton mechanism from the init process
in the container to systemd-nspawn.
The switch --notify-ready=yes configures systemd-nspawn to wait the "READY=1"
message from the init process in the container to send its own to systemd.
--notify-ready=no is equivalent to the previous behavior before this patch,
systemd-nspawn notifies systemd with a "READY=1" message when the container is
created. This notificaiton mechanism uses socket file with path relative to the contanier
"/run/systemd/nspawn/notify". The default values it --notify-ready=no.
It is also possible to configure this mechanism from the .nspawn files using
NotifyReady. This parameter takes the same options of the command line switch.
Before this patch, systemd-nspawn notifies "ready" after the inner child was created,
regardless the status of the service running inside it. Now, with --notify-ready=yes,
systemd-nspawn notifies when the service is ready. This is really useful when
there are dependencies between different contaniers.
Fixes https://github.com/systemd/systemd/issues/1369
Based on the work from https://github.com/systemd/systemd/pull/3022
Testing:
Boot a OS inside a container with systemd-nspawn.
Note: modify the commands accordingly with your filesystem.
1. Create a filesystem where you can boot an OS.
2. sudo systemd-nspawn -D ${HOME}/distros/fedora-23/ sh
2.1. Create the unit file /etc/systemd/system/sleep.service inside the container
(You can use the example below)
2.2. systemdctl enable sleep
2.3 exit
3. sudo systemd-run --service-type=notify --unit=notify-test
${HOME}/systemd/systemd-nspawn --notify-ready=yes
-D ${HOME}/distros/fedora-23/ -b
4. In a different shell run "systemctl status notify-test"
When using --notify-ready=yes the service status is "activating" for 20 seconds
before being set to "active (running)". Instead, using --notify-ready=no
the service status is marked "active (running)" quickly, without waiting for
the 20 seconds.
This patch was also test with --private-users=yes, you can test it just adding it
at the end of the command at point 3.
------ sleep.service ------
[Unit]
Description=sleep
After=network.target
[Service]
Type=oneshot
ExecStart=/bin/sleep 20
[Install]
WantedBy=multi-user.target
------------ end ------------
|
|
|
|
networkd
|
|
With this change -U will turn on user namespacing only if the kernel actually
supports it and otherwise gracefully degrade to non-userns mode.
|
|
|
|
|
|
v2:
- "=" is required, so remove the <optional> tags that v1 added
|
|
|
|
We check /etc/machine-id of the container and if it is already populated
we use value from there, possibly ignoring value of --uuid option from
the command line. When dealing with R/O image we setup transient machine
id.
Once we determined machine id of the container, we use this value for
registration with systemd-machined and we also export it via
container_uuid environment variable.
As registration with systemd-machined is done by the main nspawn process
we communicate container machine id established by setup_machine_id from
outer child to the main process by unix domain socket. Similarly to PID
of inner child.
|
|
Signed-off-by: Petros Angelatos <petrosagg@gmail.com>
|
|
This adds a new switch --as-pid2, which allows running commands as PID 2, while a stub init process is run as PID 1.
This is useful in order to run arbitrary commands in a container, as PID1's semantics are different from all other
processes regarding reaping of unknown children or signal handling.
|
|
Fixes: #2192
|
|
Avoid "mountpoint mounted" (word repetition),
"queriable" (no match in m-w.com and dict.cc).
|
|
The new switch operates like --network-veth, but may be specified
multiple times (to define multiple link pairs) and allows flexible
definition of the interface names.
This is an independent reimplementation of #1678, but defines different
semantics, keeping the behaviour completely independent of
--network-veth. It also comes will full hook-up for .nspawn files, and
the matching documentation.
|
|
|
|
|
|
Technically, it's safer that way, since dnf is supposed to parse the
"*", not the shell. It doesn't really matter too much in real life (as
the expression is too complex), but let's better be safe than sorry, and
make sure people won't file bugs about this...
|
|
Without the updates repo, we are installing packages from the time
that that version of Fedora was released. Normally, during the
lifetime of the release most packages are updated, so most of the
packages installed would be outdated, and the first update after
installation would update a massive set of packages. Avoid all this
by installing from the updates repo from the start.
|
|
Keys for previous and future Fedora distributions were added
for the fedora-repos package recently:
https://bugzilla.redhat.com/show_bug.cgi?id=1246701.
There is no need to skip signature checking.
Also, update to the latest and greatest and remove unnecessary quotes.
|
|
Apparently, yum is obsolete, and dnf is the new yum. Mention only dnf
hence, and don't mention yum anymore.
|
|
|
|
.nspawn fiels are simple settings files that may accompany container
images and directories and contain settings otherwise passed on the
nspawn command line. This provides an efficient way to attach execution
data directly to containers.
|
|
--bind and --bind-ro perform the bind mount
non-recursively. It is sometimes (often?) desirable
to do a recursive mount. This patch adds an optional
set of bind mount options in the form of:
--bind=src-path:dst-path:options
options are comma separated and currently only
"rbind" and "norbind" are allowed.
Default value is "rbind".
|
|
|
|
|
|
|
|
The --machine option used to describe searching for machines in
/var/lib/machines, which is not the whole story, so let's link to where
it's described in more detail.
|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
|
|
|
|
Previously all bind mount mounts were applied in the order specified,
followed by all tmpfs mounts in the order specified. This is
problematic, if bind mounts shall be placed within tmpfs mounts.
This patch hence reworks the custom mount point logic, and alwas applies
them in strict prefix-first order. This means the order of mounts
specified on the command line becomes irrelevant, the right operation
will always be executed.
While we are at it this commit also adds native support for overlayfs
mounts, as supported by recent kernels.
|
|
|
|
hostname and machine id unmodified
|
|
Previously, the man page suggested to only use nspawn for testing,
building, and debugging things. However, it is nowadays used in
production and used as building block for rocket, hence let's just admit
that it's pretty much production ready.
|
|
|
|
All hail linkchecker!
|
|
|
|
This is similar to systemd-run's --property= setting.
|
|
|
|
The dnf name is here to stay, we might as well adjust.
|
|
|
|
|
|
/var/lib/container to /var/lib/machines
Given that this is also the place to store raw disk images which are
very much bootable with qemu/kvm it sounds like a misnomer to call the
directory "container". Hence, let's change this sooner rather than
later, and use the generic name, in particular since we otherwise try to
use the generic "machine" preferably over the more specific "container"
or "vm".
|
|
Now that networkd's IP masquerading support means that running
containers with "--network-veth" will provide network access out of the
box for the container, let's add a shortcut "-n" for it, to make it
easily accessible.
|
|
This exposes an IP port on the container as local port using DNAT.
|
|
https://github.com/vlajos/misspell_fixer
https://github.com/torstehu/systemd/commit/b6fdeb618cf2f3ce1645b3315f15f482710c7ffa
Thanks to Torstein Husebo <torstein@huseboe.net>.
|
|
command line
|
|
Also, when booting up an ephemeral container of / use the system
hostname as default machine name.
This way specifiyng -M is unnecessary when booting up an ephemeral
container, while allowing any number of ephemeral containers to run from
the same tree.
|
