summaryrefslogtreecommitdiff
path: root/man/systemd-system.conf.xml
AgeCommit message (Collapse)Author
2015-09-10core: add support for the "pids" cgroup controllerLennart Poettering
This adds support for the new "pids" cgroup controller of 4.3 kernels. It allows accounting the number of tasks in a cgroup and enforcing limits on it. This adds two new setting TasksAccounting= and TasksMax= to each unit, as well as a gloabl option DefaultTasksAccounting=. This also updated "cgtop" to optionally make use of the new kernel-provided accounting. systemctl has been updated to show the number of tasks for each service if it is available. This patch also adds correct support for undoing memory limits for units using a MemoryLimit=infinity syntax. We do the same for TasksMax= now and hence keep things in sync here.
2015-06-18man: revert dynamic paths for split-usr setupsTom Gundersen
This did not really work out as we had hoped. Trying to do this upstream introduced several problems that probably makes it better suited as a downstream patch after all. At any rate, it is not releaseable in the current state, so we at least need to revert this before the release. * by adjusting the path to binaries, but not do the same thing to the search path we end up with inconsistent man-pages. Adjusting the search path too would be quite messy, and it is not at all obvious that this is worth the effort, but at any rate it would have to be done before we could ship this. * this means that distributed man-pages does not make sense as they depend on config options, and for better or worse we are still distributing man pages, so that is something that definitely needs sorting out before we could ship with this patch. * we have long held that split-usr is only minimally supported in order to boot, and something we hope will eventually go away. So before we start adding even more magic/effort in order to make this work nicely, we should probably question if it makes sense at all.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-04-07man: document default timeouts and start limit parametersLennart Poettering
2015-03-13man: fix a bunch of linksZbigniew Jędrzejewski-Szmek
All hail linkchecker!
2015-03-03Do not advertise .d snippets over main config fileZbigniew Jędrzejewski-Szmek
For daemons which have a main configuration file, there's little reason for the administrator to use configuration snippets. They are useful for packagers which need to override settings, but we shouldn't advertise that as the main way of configuring those services. https://bugs.freedesktop.org/show_bug.cgi?id=89397
2015-02-10man: boilerplate unificationZbigniew Jędrzejewski-Szmek
2015-02-03Reindent man pages to 2chZbigniew Jędrzejewski-Szmek
2014-11-29core: Support system.conf.d and user.conf.d directories in the usual search ↵Josh Triplett
paths
2014-10-28core: remove system start timeout logic againLennart Poettering
The system start timeout as previously implemented would get confused by long-running services that are included in the initial system startup transaction for example by being cron-job-like long-running services triggered immediately at boot. Such long-running jobs would be subject to the default 15min timeout, esily triggering it. Hence, remove this again. In a subsequent commit, introduce per-target job timeouts instead, that allow us to control these timeouts more finegrained.
2014-08-22core: introduce "poweroff" as new failure action typesLennart Poettering
Also, change the default action on a system start-up timeout to powering off.
2014-08-22core: add support for a configurable system-wide start-up timeoutLennart Poettering
When this system-wide start-up timeout is hit we execute one of the failure actions already implemented for services that fail. This should not only be useful on embedded devices, but also on laptops which have the power-button reachable when the lid is closed. This devices, when in a backpack might get powered on by accident due to the easily reachable power button. We want to make sure that the system turns itself off if it starts up due this after a while. When the system manages to fully start-up logind will suspend the machine by default if the lid is closed. However, in some cases we don't even get as far as logind, and the boot hangs much earlier, for example because we ask for a LUKS password that nobody ever enters. Yeah, this is a real-life problem on my Yoga 13, which has one of those easily accessible power buttons, even if the device is closed.
2014-07-07man: add a mapping for external manpagesZbigniew Jędrzejewski-Szmek
It is annoying when we have dead links on fd.o. Add project='man-pages|die-net|archlinux' to <citerefentry>-ies. In generated html, add external links to http://man7.org/linux/man-pages/man, http://linux.die.net/man/, https://www.archlinux.org/. By default, pages in sections 2 and 4 go to man7, since Michael Kerrisk is the autorative source on kernel related stuff. The rest of links goes to linux.die.net, because they have the manpages. Except for the pacman stuff, since it seems to be only available from archlinux.org. Poor gummiboot gets no link, because gummitboot(8) ain't to be found on the net. According to common wisdom, that would mean that it does not exist. But I have seen Kay using it, so I know it does, and deserves to be found. Can somebody be nice and put it up somewhere?
2014-05-22cgroups: simplify CPUQuota= logicLennart Poettering
Only accept cpu quota values in percentages, get rid of period definition. It's not clear whether the CFS period controllable per-cgroup even has a future in the kernel, hence let's simplify all this, hardcode the period to 100ms and only accept percentage based quota values.
2014-04-25core: expose CFS CPU time quota as high-level unit propertiesLennart Poettering
2014-03-24core: add a setting to globally control the default for timer unit accuracyLennart Poettering
2014-02-24core: add global settings for enabling CPUAccounting=, MemoryAccounting=, ↵Lennart Poettering
BlockIOAccounting= for all units at once
2014-02-17doc: resolve missing/extraneous words or inappropriate formsJan Engelhardt
Issues fixed: * missing words required by grammar * duplicated or extraneous words * inappropriate forms (e.g. singular/plural), and declinations * orthographic misspellings
2014-02-17doc: update punctuationJan Engelhardt
Resolve spotted issues related to missing or extraneous commas, dashes.
2014-02-13core: add a system-wide SystemCallArchitectures= settingLennart Poettering
This is useful to prohibit execution of non-native processes on systems, for example 32bit binaries on 64bit systems, this lowering the attack service on incorrect syscall and ioctl 32→64bit mappings.
2013-11-08manager: configurable StartLimit default valuesLukas Nykryn
https://bugzilla.redhat.com/show_bug.cgi?id=821723
2013-11-07man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted: comma setting, missing words/preposition choice.
2013-11-05Configurable Timeouts/Restarts default valuesOleksii Shevchuk
https://bugs.freedesktop.org/show_bug.cgi?id=71132 Patch adds DefaultTimeoutStartSec, DefaultTimeoutStopSec, DefaultRestartSec configuration options to manager configuration file.
2013-09-26core: drop some out-of-date references to cgroup settingsLennart Poettering
2013-09-12man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted. I guess I can just skip over reporting ubiquitous comma placement fixes… Highligts in this particular commit: - the "unsigned" type qualifier is completed to form a full type "unsigned int" - alphabetic -> lexicographic (that way we automatically define how numbers get sorted)
2013-07-02man: improve grammar and word formatting in numerous man pagesJason St. John
Use proper grammar, word usage, adjective hyphenation, commas, capitalization, spelling, etc. To improve readability, some run-on sentences or sentence fragments were revised. [zj: remove the space from 'file name', 'host name', and 'time zone'.]
2013-06-20man: fix example for DefaultEnvironment=Lennart Poettering
The example mentioned Environment= rather than DefaultEnvironment=. Also made some other clean-ups.
2013-06-20manager: add DefaultEnvironment optionUmut Tezduyar
This complements existing functionality of setting variables through 'systemctl set-environment', the kernel command line, and through normal environment variables for systemd in session mode.
2013-04-15Fix spelling errors using 'codespell' toolAnatol Pomozov
2013-02-27man: clarify how to configure default control group hierarchies for services ↵Lennart Poettering
and sessions
2013-02-13man: rename systemd.conf to systemd-system.confZbigniew Jędrzejewski-Szmek
Alias as systemd-user.conf is also provided. This should help users running systemd in session mode. https://bugzilla.redhat.com/show_bug.cgi?id=690868