| Age | Commit message (Collapse) | Author |
|---|
|
The new parser supports:
<value> - specify both limits to the same value
<soft:hard> - specify both limits
the size or time specific suffixes are supported, for example
LimitRTTIME=1sec
LimitAS=4G:16G
The patch introduces parse_rlimit_range() and rlim type (size, sec,
usec, etc.) specific parsers. No code is duplicated now.
The patch also sync docs for DefaultLimitXXX= and LimitXXX=.
References: https://github.com/systemd/systemd/issues/1769
|
|
Also, enable TasksAccounting= for all services by default, too.
See:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/035006.html
|
|
This allows initializing the TasksMax= setting of all units by default
to some fixed value, instead of leaving it at infinity as before.
|
|
Let's make things more user-friendly and support for example
LimitAS=16G
rather than force users to always use LimitAS=16106127360.
The change is relevant for options:
[Default]Limit{FSIZE,DATA,STACK,CORE,RSS,AS,MEMLOCK,MSGQUEUE}
The patch introduces config_parse_bytes_limit(), it's the same as
config_parse_limit() but uses parse_size() tu support the suffixes.
Addresses: https://github.com/systemd/systemd/issues/1772
|
|
Document support for commas as a separator and possibility of specifying
ranges of CPU indices.
Tested by regenerating the manpages locally and reading them on man.
|
|
This introduces a new systemd.crash_reboot=1 kernel command line option
that triggers a reboot after crashing.
This also cleans up crash VT handling. Specifically, it cleans up the
configuration setting, to be between 1..63 or a boolean. This is to
replace the previous logic where "-1" meant disabled. We continue to
accept that setting, but only document the boolean syntax instead.
This also brings the documentation of the default settings in sync with
what actually happens.
The CrashChVT= configuration file setting is renamed to CrashChangeVT=,
following our usual logic of not abbreviating unnecessarily. The old
setting stays support for compat reasons.
Fixes #1300
|
|
This adds support for the new "pids" cgroup controller of 4.3 kernels.
It allows accounting the number of tasks in a cgroup and enforcing
limits on it.
This adds two new setting TasksAccounting= and TasksMax= to each unit,
as well as a gloabl option DefaultTasksAccounting=.
This also updated "cgtop" to optionally make use of the new
kernel-provided accounting.
systemctl has been updated to show the number of tasks for each service
if it is available.
This patch also adds correct support for undoing memory limits for units
using a MemoryLimit=infinity syntax. We do the same for TasksMax= now
and hence keep things in sync here.
|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
|
|
All hail linkchecker!
|
|
For daemons which have a main configuration file, there's
little reason for the administrator to use configuration snippets.
They are useful for packagers which need to override settings, but
we shouldn't advertise that as the main way of configuring those
services.
https://bugs.freedesktop.org/show_bug.cgi?id=89397
|
|
|
|
|
|
paths
|
|
The system start timeout as previously implemented would get confused by
long-running services that are included in the initial system startup
transaction for example by being cron-job-like long-running services
triggered immediately at boot. Such long-running jobs would be subject
to the default 15min timeout, esily triggering it.
Hence, remove this again. In a subsequent commit, introduce per-target
job timeouts instead, that allow us to control these timeouts more
finegrained.
|
|
Also, change the default action on a system start-up timeout to powering off.
|
|
When this system-wide start-up timeout is hit we execute one of the
failure actions already implemented for services that fail.
This should not only be useful on embedded devices, but also on laptops
which have the power-button reachable when the lid is closed. This
devices, when in a backpack might get powered on by accident due to the
easily reachable power button. We want to make sure that the system
turns itself off if it starts up due this after a while.
When the system manages to fully start-up logind will suspend the
machine by default if the lid is closed. However, in some cases we don't
even get as far as logind, and the boot hangs much earlier, for example
because we ask for a LUKS password that nobody ever enters.
Yeah, this is a real-life problem on my Yoga 13, which has one of those
easily accessible power buttons, even if the device is closed.
|
|
It is annoying when we have dead links on fd.o.
Add project='man-pages|die-net|archlinux' to <citerefentry>-ies.
In generated html, add external links to
http://man7.org/linux/man-pages/man, http://linux.die.net/man/,
https://www.archlinux.org/.
By default, pages in sections 2 and 4 go to man7, since Michael
Kerrisk is the autorative source on kernel related stuff.
The rest of links goes to linux.die.net, because they have the
manpages.
Except for the pacman stuff, since it seems to be only available from
archlinux.org.
Poor gummiboot gets no link, because gummitboot(8) ain't to be found
on the net. According to common wisdom, that would mean that it does
not exist. But I have seen Kay using it, so I know it does, and
deserves to be found. Can somebody be nice and put it up somewhere?
|
|
Only accept cpu quota values in percentages, get rid of period
definition.
It's not clear whether the CFS period controllable per-cgroup even has a
future in the kernel, hence let's simplify all this, hardcode the period
to 100ms and only accept percentage based quota values.
|
|
|
|
|
|
BlockIOAccounting= for all units at once
|
|
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
|
|
Resolve spotted issues related to missing or extraneous commas, dashes.
|
|
This is useful to prohibit execution of non-native processes on systems,
for example 32bit binaries on 64bit systems, this lowering the attack
service on incorrect syscall and ioctl 32→64bit mappings.
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=821723
|
|
This is a recurring submission and includes corrections to various
issue spotted: comma setting, missing words/preposition choice.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=71132
Patch adds DefaultTimeoutStartSec, DefaultTimeoutStopSec, DefaultRestartSec
configuration options to manager configuration file.
|
|
|
|
This is a recurring submission and includes corrections to various
issue spotted. I guess I can just skip over reporting ubiquitous
comma placement fixes…
Highligts in this particular commit:
- the "unsigned" type qualifier is completed to form a full type
"unsigned int"
- alphabetic -> lexicographic (that way we automatically define how
numbers get sorted)
|
|
Use proper grammar, word usage, adjective hyphenation, commas,
capitalization, spelling, etc.
To improve readability, some run-on sentences or sentence fragments were
revised.
[zj: remove the space from 'file name', 'host name', and 'time zone'.]
|
|
The example mentioned Environment= rather than DefaultEnvironment=.
Also made some other clean-ups.
|
|
This complements existing functionality of setting variables
through 'systemctl set-environment', the kernel command line,
and through normal environment variables for systemd in session
mode.
|
|
|
|
and sessions
|
|
Alias as systemd-user.conf is also provided. This should help
users running systemd in session mode.
https://bugzilla.redhat.com/show_bug.cgi?id=690868
|
