| Age | Commit message (Collapse) | Author |
|---|
|
This improves kernel command line parsing in a number of ways:
a) An kernel option "foo_bar=xyz" is now considered equivalent to
"foo-bar-xyz", i.e. when comparing kernel command line option names "-" and
"_" are now considered equivalent (this only applies to the option names
though, not the option values!). Most of our kernel options used "-" as word
separator in kernel command line options so far, but some used "_". With
this change, which was a source of confusion for users (well, at least of
one user: myself, I just couldn't remember that it's systemd.debug-shell,
not systemd.debug_shell). Considering both as equivalent is inspired how
modern kernel module loading normalizes all kernel module names to use
underscores now too.
b) All options previously using a dash for separating words in kernel command
line options now use an underscore instead, in all documentation and in
code. Since a) has been implemented this should not create any compatibility
problems, but normalizes our documentation and our code.
c) All kernel command line options which take booleans (or are boolean-like)
have been reworked so that "foobar" (without argument) is now equivalent to
"foobar=1" (but not "foobar=0"), thus normalizing the handling of our
boolean arguments. Specifically this means systemd.debug-shell and
systemd_debug_shell=1 are now entirely equivalent.
d) All kernel command line options which take an argument, and where no
argument is specified will now result in a log message. e.g. passing just
"systemd.unit" will no result in a complain that it needs an argument. This
is implemented in the proc_cmdline_missing_value() function.
e) There's now a call proc_cmdline_get_bool() similar to proc_cmdline_get_key()
that parses booleans (following the logic explained in c).
f) The proc_cmdline_parse() call's boolean argument has been replaced by a new
flags argument that takes a common set of bits with proc_cmdline_get_key().
g) All kernel command line APIs now begin with the same "proc_cmdline_" prefix.
h) There are now tests for much of this. Yay!
|
|
|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
This was changed from 30 to 180 seconds quite some time ago.
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
|
|
XML files that use 2ch indenting
In the long run we really should figure out if we want to stick with 8ch
or 2ch indenting, and not continue with half-and-half. For now, just
make emacs aware of the files that use 2ch indenting.
|
|
|
|
A follow-up to:
commit 3f85ef0f05ffc51e19f86fb83a1c51e8e3cd6817
Author: Harald Hoyer <harald@redhat.com>
Date: Thu Nov 6 15:33:48 2014 +0100
s/commandline/command line/g
|
|
The term "priority" is misleading because higher levels have lower
priority. "Level" is clearer and shorter.
This commit touches only the textual descriptions, not function and variable
names themselves. "Priority" is used in various command-line switches and
protocol constants, so completly getting rid of "priority" is hard.
I also left "priority" in various places where the clarity suffered
when it was removed.
|
|
Evidently some people had trouble finding it in the documentation.
|
|
We generally have separate man pages for all configuration files.
In this case udev.conf was already described in systemd-udevd.service(8),
but it was hard to find. Docbook makes it hard to add a .so link from
a different section, so describe udev.conf in its own page.
|
|
|
|
Some events take longer than the default 30 seconds. Killing those
events will leave the machine halfway configured.
Add a commandline option '--event-timeout' to handle these cases.
|
|
|
|
|
|
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
|
|
Resolve spotted issues related to missing or extraneous commas, dashes.
|
|
Actually 'STDOUT' is something that doesn't appear anywhere: in the
stdlib we have 'stdin', and there's only the constant STDOUT_FILENO,
so there's no reason to use capitals. When refering to code,
STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in
other places they are replaced with normal phrases like standard
output, etc.
|
|
* standardize capitalization of STDIN, STDOUT, and STDERR
* reword some sentences for clarity
* reflow some very long lines to be shorter than ~80 characters
* add some missing <literal>, <constant>, <varname>, <option>, and <filename> tags
|
|
|
|
|
|
The properties will still be set in the udev database, but they will not be used
for setting the interface names. As for the other kernel commandline switches,
we allow it to be prefixed by 'rd.' to only apply in the initrd.
|
|
Moved from udev(7) to systemd-udevd.service(8), where the rest of the
documentation of the configuration of the daemon lives.
|
|
New sections are added: PAM options, crypttab options, commandline
options, miscellaneous. The last category will be used for all
untagged <varname> elements.
Commandline options sections is meant to be a developer tool: when
adding an option it is sometimes useful to be able to check if
similarly named options exist elsewhere.
|
|
Use proper (or at least more proper) docbook tags for various
fields. This should help with automatic parsing of the documentation.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=55890
Fixed typos, serial comma, and removed "either" as there were more
than two options. Also did an extra rename of "system-shutdown"
to "systemd-shutdown" that was forgotten in commit
8bd3b8620c80d0f2383f2fb04315411fc8077ca1
|
|
We want to keep things uniform, and hence treat udevd's man page like
any other in the repo. What matters is how users primarily interface
with a service, and that is not the binary path in /usr/lib/systemd but
the service name.
This reverts commit 6c1f3ba54ac1f42598c543b86daaf294b29294b1.
|
|
Instead of making systemd-udevd a so-link to systemd-udevd.service,
ship the real page as systemd-udevd to integrate better with distros
where udevd might be run standalone.
|
|
This naming convention is more inline with other systemd daemon
unit names (systemd-logind.service, systemd-localed.service etc)
The companion .socket units have also been renamed, however the
-trigger and -settle units keep their current name as these are
not directly related to daemon process itself.
|
|
The service is systemd-udev.service, not systemd-udevd.service.
|
|
|
|
|
|
Since the binary name is now hidden away in /usr/lib/ the primary user
handle for the udev service is the unit name, hence change the man page
to be available under the unit name, and make the binary name an alias
for it.
|
