| Age | Commit message (Collapse) | Author |
|---|
|
The setting is hardly useful (since its effect is generally reduced to zero due
to file system caps), and with the advent of ambient caps an actually useful
replacement exists, hence let's get rid of this.
I am pretty sure this was unused and our man page already recommended against
its use, hence this should be a safe thing to remove.
|
|
|
|
The new parser supports:
<value> - specify both limits to the same value
<soft:hard> - specify both limits
the size or time specific suffixes are supported, for example
LimitRTTIME=1sec
LimitAS=4G:16G
The patch introduces parse_rlimit_range() and rlim type (size, sec,
usec, etc.) specific parsers. No code is duplicated now.
The patch also sync docs for DefaultLimitXXX= and LimitXXX=.
References: https://github.com/systemd/systemd/issues/1769
|
|
|
|
Dependency engine improvements
|
|
For all units ensure there's an "Automatic Dependencies" section in the
man page, and explain which dependencies are automatically added in all
cases, and which ones are added on top if DefaultDependencies=yes is
set.
This is also done for systemd.exec(5), systemd.resource-control(5) and
systemd.unit(5) as these pages describe common behaviour of various unit
types.
|
|
This directive allows passing environment variables from the system
manager to spawned services. Variables in the system manager can be set
inside a container by passing `--set-env=...` options to systemd-spawn.
Tested with an on-disk test.service unit. Tested using multiple variable
names on a single line, with an empty setting to clear the current list
of variables, with non-existing variables.
Tested using `systemd-run -p PassEnvironment=VARNAME` to confirm it
works with transient units.
Confirmed that `systemctl show` will display the PassEnvironment
settings.
Checked that man pages are generated correctly.
No regressions in `make check`.
|
|
Let's make sure "LimitCPU=30min" can be parsed properly, following the
usual logic how we parse time values. Similar for LimitRTTIME=.
While we are at it, extend a bit on the man page section about resource
limits.
Fixes: #1772
|
|
doc: typo and ortho fixes
|
|
|
|
|
|
Let's make things more user-friendly and support for example
LimitAS=16G
rather than force users to always use LimitAS=16106127360.
The change is relevant for options:
[Default]Limit{FSIZE,DATA,STACK,CORE,RSS,AS,MEMLOCK,MSGQUEUE}
The patch introduces config_parse_bytes_limit(), it's the same as
config_parse_limit() but uses parse_size() tu support the suffixes.
Addresses: https://github.com/systemd/systemd/issues/1772
|
|
|
|
Document support for commas as a separator and possibility of specifying
ranges of CPU indices.
Tested by regenerating the manpages locally and reading them on man.
|
|
If set to ~ the working directory is set to the home directory of the
user configured in User=.
This change also exposes the existing switch for the working directory
that allowed making missing working directories non-fatal.
This also changes "machinectl shell" to make use of this to ensure that
the invoked shell is by default in the user's home directory.
Fixes #1268.
|
|
|
|
When generating utmp/wtmp entries, optionally add both LOGIN_PROCESS and
INIT_PROCESS entries or even all three of LOGIN_PROCESS, INIT_PROCESS
and USER_PROCESS entries, instead of just a single INIT_PROCESS entry.
With this change systemd may be used to not only invoke a getty directly
in a SysV-compliant way but alternatively also a login(1) implementation
or even forego getty and login entirely, and invoke arbitrary shells in
a way that they appear in who(1) or w(1).
This is preparation for a later commit that adds a "machinectl shell"
operation to invoke a shell in a container, in a way that is compatible
with who(1) and w(1).
|
|
If a line doesn't contain an = separator, it is skipped, rather than
raising an error.
This is potentially useful, so let's document this behaviour.
|
|
|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
|
|
All hail linkchecker!
|
|
Explicitly put the "multiple EnvironmentFile=" description into its own
paragraph to make it much easier to find.
|
|
|
|
|
|
|
|
See
http://cgit.freedesktop.org/systemd/systemd/tree/src/core/load-fragment.c#n1100
|
|
|
|
See https://bugs.freedesktop.org/show_bug.cgi?id=80341
|
|
In service file, if the file has some of special SMACK label in
ExecStart= and systemd has no permission for the special SMACK label
then permission error will occurred. To resolve this, systemd should
be able to set its SMACK label to something accessible of ExecStart=.
So introduce new SmackProcessLabel. If label is specified with
SmackProcessLabel= then the child systemd will set its label to
that. To successfully execute the ExecStart=, accessible label should
be specified with SmackProcessLabel=.
Additionally, by SMACK policy, if the file in ExecStart= has no
SMACK64EXEC then the executed process will have given label by
SmackProcessLabel=. But if the file has SMACK64EXEC then the
SMACK64EXEC label will be overridden.
[zj: reword man page]
|
|
|
|
|
|
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=760613
|
|
|
|
|
|
|
|
|
|
|
|
It is annoying when we have dead links on fd.o.
Add project='man-pages|die-net|archlinux' to <citerefentry>-ies.
In generated html, add external links to
http://man7.org/linux/man-pages/man, http://linux.die.net/man/,
https://www.archlinux.org/.
By default, pages in sections 2 and 4 go to man7, since Michael
Kerrisk is the autorative source on kernel related stuff.
The rest of links goes to linux.die.net, because they have the
manpages.
Except for the pacman stuff, since it seems to be only available from
archlinux.org.
Poor gummiboot gets no link, because gummitboot(8) ain't to be found
on the net. According to common wisdom, that would mean that it does
not exist. But I have seen Kay using it, so I know it does, and
deserves to be found. Can somebody be nice and put it up somewhere?
|
|
|
|
Instead of blindly creating another bind mount for read-only mounts,
check if there's already one we can use, and if so, use it. Also,
recursively mark all submounts read-only too. Also, ignore autofs mounts
when remounting read-only unless they are already triggered.
|
|
This would otherwise unconditionally trigger any /boot autofs mount,
which we probably should avoid.
ProtectSystem= will now only cover /usr and (optionally) /etc, both of
which cannot be autofs anyway.
ProtectHome will continue to cover /run/user and /home. The former
cannot be autofs either. /home could be, however is frequently enough
used (unlikey /boot) so that it isn't too problematic to simply trigger
it unconditionally via ProtectHome=.
|
|
also mounting /etc read-only
Also, rename ProtectedHome= to ProtectHome=, to simplify things a bit.
With this in place we now have two neat options ProtectSystem= and
ProtectHome= for protecting the OS itself (and optionally its
configuration), and for protecting the user's data.
|
|
ReadOnlySystem= uses fs namespaces to mount /usr and /boot read-only for
a service.
ProtectedHome= uses fs namespaces to mount /home and /run/user
inaccessible or read-only for a service.
This patch also enables these settings for all our long-running services.
Together they should be good building block for a minimal service
sandbox, removing the ability for services to modify the operating
system or access the user's private data.
|
|
|
|
Set commas where there should be some.
Some improvements to word order.
|
|
This patch exchange words which are inappropriate for a situation,
deletes duplicated words, and adds particles where needed.
|
|
|
|
http://lists.freedesktop.org/archives/systemd-devel/2014-March/018004.html
|
