| Age | Commit message (Collapse) | Author |
|---|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
|
|
All hail linkchecker!
|
|
Explicitly put the "multiple EnvironmentFile=" description into its own
paragraph to make it much easier to find.
|
|
|
|
|
|
|
|
See
http://cgit.freedesktop.org/systemd/systemd/tree/src/core/load-fragment.c#n1100
|
|
|
|
See https://bugs.freedesktop.org/show_bug.cgi?id=80341
|
|
In service file, if the file has some of special SMACK label in
ExecStart= and systemd has no permission for the special SMACK label
then permission error will occurred. To resolve this, systemd should
be able to set its SMACK label to something accessible of ExecStart=.
So introduce new SmackProcessLabel. If label is specified with
SmackProcessLabel= then the child systemd will set its label to
that. To successfully execute the ExecStart=, accessible label should
be specified with SmackProcessLabel=.
Additionally, by SMACK policy, if the file in ExecStart= has no
SMACK64EXEC then the executed process will have given label by
SmackProcessLabel=. But if the file has SMACK64EXEC then the
SMACK64EXEC label will be overridden.
[zj: reword man page]
|
|
|
|
|
|
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=760613
|
|
|
|
|
|
|
|
|
|
|
|
It is annoying when we have dead links on fd.o.
Add project='man-pages|die-net|archlinux' to <citerefentry>-ies.
In generated html, add external links to
http://man7.org/linux/man-pages/man, http://linux.die.net/man/,
https://www.archlinux.org/.
By default, pages in sections 2 and 4 go to man7, since Michael
Kerrisk is the autorative source on kernel related stuff.
The rest of links goes to linux.die.net, because they have the
manpages.
Except for the pacman stuff, since it seems to be only available from
archlinux.org.
Poor gummiboot gets no link, because gummitboot(8) ain't to be found
on the net. According to common wisdom, that would mean that it does
not exist. But I have seen Kay using it, so I know it does, and
deserves to be found. Can somebody be nice and put it up somewhere?
|
|
|
|
Instead of blindly creating another bind mount for read-only mounts,
check if there's already one we can use, and if so, use it. Also,
recursively mark all submounts read-only too. Also, ignore autofs mounts
when remounting read-only unless they are already triggered.
|
|
This would otherwise unconditionally trigger any /boot autofs mount,
which we probably should avoid.
ProtectSystem= will now only cover /usr and (optionally) /etc, both of
which cannot be autofs anyway.
ProtectHome will continue to cover /run/user and /home. The former
cannot be autofs either. /home could be, however is frequently enough
used (unlikey /boot) so that it isn't too problematic to simply trigger
it unconditionally via ProtectHome=.
|
|
also mounting /etc read-only
Also, rename ProtectedHome= to ProtectHome=, to simplify things a bit.
With this in place we now have two neat options ProtectSystem= and
ProtectHome= for protecting the OS itself (and optionally its
configuration), and for protecting the user's data.
|
|
ReadOnlySystem= uses fs namespaces to mount /usr and /boot read-only for
a service.
ProtectedHome= uses fs namespaces to mount /home and /run/user
inaccessible or read-only for a service.
This patch also enables these settings for all our long-running services.
Together they should be good building block for a minimal service
sandbox, removing the ability for services to modify the operating
system or access the user's private data.
|
|
|
|
Set commas where there should be some.
Some improvements to word order.
|
|
This patch exchange words which are inappropriate for a situation,
deletes duplicated words, and adds particles where needed.
|
|
|
|
http://lists.freedesktop.org/archives/systemd-devel/2014-March/018004.html
|
|
tcpwrap is legacy code, that is barely maintained upstream. It's APIs
are awful, and the feature set it exposes (such as DNS and IDENT
access control) questionnable. We should not support this natively in
systemd.
Hence, let's remove the code. If people want to continue making use of
this, they can do so by plugging in "tcpd" for the processes they start.
With that scheme things are as well or badly supported as they were from
traditional inetd, hence no functionality is really lost.
|
|
Keep mounts done by udev rules private to udevd. Also, document how
MountFlags= may be used for this.
|
|
|
|
|
|
As discussed on the ML these are useful to manage runtime directories
below /run for services.
|
|
|
|
This new unit settings allows restricting which address families are
available to processes. This is an effective way to minimize the attack
surface of services, by turning off entire network stacks for them.
This is based on seccomp, and does not work on x86-32, since seccomp
cannot filter socketcall() syscalls on that platform.
|
|
This permit to switch to a specific apparmor profile when starting a daemon. This
will result in a non operation if apparmor is disabled.
It also add a new build requirement on libapparmor for using this feature.
|
|
|
|
processes
|
|
And make use of it where appropriate for executing services and for
nspawn.
|
|
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
|
|
Resolve spotted issues related to missing or extraneous commas, dashes.
|
|
Actually 'STDOUT' is something that doesn't appear anywhere: in the
stdlib we have 'stdin', and there's only the constant STDOUT_FILENO,
so there's no reason to use capitals. When refering to code,
STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in
other places they are replaced with normal phrases like standard
output, etc.
|
|
* standardize capitalization of STDIN, STDOUT, and STDERR
* reword some sentences for clarity
* reflow some very long lines to be shorter than ~80 characters
* add some missing <literal>, <constant>, <varname>, <option>, and <filename> tags
|
|
architecture support for system calls
Also, turn system call filter bus properties into complex types instead
of concatenated strings.
|
|
- Allow configuration of an errno error to return from blacklisted
syscalls, instead of immediately terminating a process.
- Fix parsing logic when libseccomp support is turned off
- Only keep the actual syscall set in the ExecContext, and generate the
string version only on demand.
|
|
|
|
Let's always call the security labels the same way:
SMACK: "Smack Label"
SELINUX: "SELinux Security Context"
And the low-level encapsulation is called "seclabel". Now let's hope we
stick to this vocabulary in future, too, and don't mix "label"s and
"security contexts" and so on wildly.
|
