summaryrefslogtreecommitdiff
path: root/man/systemd.netdev.xml
AgeCommit message (Collapse)Author
2016-05-15networkd: bridge add support to configure multicast snooping (#3223)Susant Sahani
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute it can change the multicast snooping value. IGMP snooping monitors the Internet Group Management Protocol (IGMP) traffic between hosts and multicast routers.
2016-04-18networkd: allow setting of multicast querier for linux bridge (#3051)Susant Sahani
2016-02-24treewide: fix typos and then/that useTorstein Husebø
2016-01-19networkd: VXLAN add support to configure portSusant Sahani
This patch add support to configure port PortRange: VXLAN bases source UDP port based on flow to help the receiver to be able to load balance based on outer header flow. DestinatinPort: Allow configuring the default destination port on a per-device basis.
2015-11-09Merge pull request #1629 from ssahani/vxlanTom Gundersen
networkd: vxlan add option to set FDB entries
2015-11-06doc: correct orthography, word forms and missing/extraneous wordsJan Engelhardt
2015-11-06doc: correct punctuation and improve typography in documentationJan Engelhardt
2015-11-03man: add man for vxlan onfigures max number of FDB entriesSusant Sahani
2015-10-06Merge pull request #1452 from poettering/journal-vacuumDaniel Mack
A variety of journal vacuuming improvements, plus an nspawn fix
2015-10-05man: add man for bridge paramsSusant Sahani
2015-10-03man: include numeric prefixes in example file names for .link, .netdev, ↵Lennart Poettering
.network files In order to avoid confusion with the default files we ship, let's use a low prefix number for all examples. Fixes #1409.
2015-08-31man: add man for tunnel encap limitSusant Sahani
2015-08-20Adding bonding examples for systemd-networkdMajor Hayden
This commit provides some basic bonding configuration examples for .netdev and .network files.
2015-07-29man: add man for VXLAN Group Policy optionSusant Sahani
2015-07-28Merge pull request #732 from ssahani/macvtapTom Gundersen
networkd: add support for Macvtap
2015-07-27networkd: capitalize VNetHeader= as VnetHeader=Lennart Poettering
Even when we use shortened, combined words, we still should uppercase where a new word starts. I couldn't find a canonically capitalized version of this term, hence I think we should follow our naming rules here.
2015-07-27man: netdev add man for macvtapSusant Sahani
2015-07-25Merge pull request #727 from phomes/masterTom Gundersen
man: typo fixes
2015-07-25man: typo fixesThomas Hindoe Paaboel Andersen
2015-07-25man: describe masking of .network files betterZbigniew Jędrzejewski-Szmek
This should clear up some confusion in https://github.com/systemd/systemd/issues/717. This basically copies the description from systemd.unit to this man page. Masking can happen also in /run, so strike the part about /etc, and also add the magic work "mask".
2015-07-24network: rename DiffServiceCodePoint to CopyDSCPZbigniew Jędrzejewski-Szmek
Old name was slightly misleading, because this flag does not determine whether DSCP is used overall, but only if it is copied to the decapsulated packet. Rename to better reflect that. "Copy" does not imply direction. This is on purpose, because we might later on enhance the setting to allow/disallow copying in the other direction, to the encapsulated packet. If that is implemented, CopyDSCP could understand additional values. This is nicer than having two separate settings and follows the example of DHCP=. Also, we try to avoid abbreviations, but we allow acronyms like MTU, in DiscoverPathMTU=. This setting was recently added, so it's fine to rename it without backwards compat.
2015-07-24man: try to better describe DiffServiceCodePoint= settingZbigniew Jędrzejewski-Szmek
http://marc.info/?l=linux-netdev&m=109507453227993&w=2
2015-07-23man: add man for DSCPSusant Sahani
2015-07-21man: add man ipv6 flowlabel support for ip6 tunnelsSusant Sahani
2015-07-14man: add man for tap vnet_hdrSusant Sahani
2015-06-18man: revert dynamic paths for split-usr setupsTom Gundersen
This did not really work out as we had hoped. Trying to do this upstream introduced several problems that probably makes it better suited as a downstream patch after all. At any rate, it is not releaseable in the current state, so we at least need to revert this before the release. * by adjusting the path to binaries, but not do the same thing to the search path we end up with inconsistent man-pages. Adjusting the search path too would be quite messy, and it is not at all obvious that this is worth the effort, but at any rate it would have to be done before we could ship this. * this means that distributed man-pages does not make sense as they depend on config options, and for better or worse we are still distributing man pages, so that is something that definitely needs sorting out before we could ship with this patch. * we have long held that split-usr is only minimally supported in order to boot, and something we hope will eventually go away. So before we start adding even more magic/effort in order to make this work nicely, we should probably question if it makes sense at all.
2015-06-02man: replace hard-coded /usr/libDaniel Mack
Replace some /usr/lib occurences in man/ with &rootprefix;/lib.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-05-11treewide: Correct typos and spell plural of bus consistentTorstein Husebø
2015-04-29networkd: add man for vti6 tunnelSusant Sahani
2015-04-21networkd man: fix man and config name.Susant Sahani
Rename bond confs and man as well. [tomegun: dropped a stray comma]
2015-04-20networkd: Add support for bond option.Susant Sahani
This patch adds configurational support for bond option. Test conf: bond.netdev --- [NetDev] Name=bond1 Kind=bond [Bond] ArpAllTargets=all PrimaryReselect=better ArpIntervalSec=10s ArpIpTargets= 192.168.8.102 192.168.8.101 192.168.8.102 --- $cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 10000 ARP IP target/s (n.n.n.n form): 192.168.8.100, 192.168.8.101, 192.168.8.102
2015-04-20networkd vxlan: Add support for enabling UDP checksumsSusant Sahani
Add UDPCheckSum option to enable transmitting UDP checksums when doing VXLAN/IPv4. Add UDP6ZeroChecksumRx, and UDP6ZeroChecksumTx options to enable sending zero checksums and receiving zero checksums in VXLAN/IPv6 [tomegun: rebase manpage due to whitespace changes]
2015-03-03man: fix typoLennart Poettering
2015-02-03Reindent man pages to 2chZbigniew Jędrzejewski-Szmek
2015-01-29man: turn new netdev table into a proper tableLennart Poettering
2015-01-28man: netdev - add some minimal explanation to the different netdev kinds and ↵Tom Gundersen
modes Would be awesome to expand on this a lot, as there is currently no decent documentation for most of these things.
2015-01-28networkd: tunnel - call tunnel modes ipip6, not ip4ipv6 to match ip(8)Tom Gundersen
2015-01-26man: fix minor type in man pageLennart Poettering
2015-01-22networkd: Introduce ip6gre and ip6gretapSusant Sahani
This patch introduces ipv6 gre and gretap. test: ip6gre.netdev: [NetDev] Name=ip6gretap Kind=ip6gretap [Tunnel] Local=2a00:ffde:4567:edde::4987 Remote=2001:473:fece:cafe::5179 ip6gre.network: [Match] Name=eno16777736 [Network] Tunnel=ip6gretap ip link 6: ip6gre@eno16777736: <POINTOPOINT,NOARP> mtu 1448 qdisc noop state DOWN mode DEFAULT group default link/gre6 2a:00:ff:de:45:67:ed:de:00:00:00:00:00:00:49:87 peer 20:01:04:73:fe:ce:ca:fe:00:00:00:00:00:00:51:79
2015-01-22networkd: Introduce IP6 tunnelSusant Sahani
This patch enables networkd to create IP6 tunnels example conf: ipip6.netdev: [NetDev] Name=ipip6-tunnel Kind=ip6tnl [Tunnel] Mode=ip4ipv6 Local=2a00:ffde:4567:edde::4987 Remote=2001:473:fece:cafe::5179 ipip6.network [Match] Name=wlan0 [Network] Tunnel=ipip6-tunnel 23: ipip6-tunnel@wlan0: <POINTOPOINT,NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default link/tunnel6 2a00:ffde:4567:edde::4987 peer 2001:473:fece:cafe::5179
2015-01-22networkd: introduce gretapSusant Sahani
This patch introdeces gretap to networkd
2015-01-19networkd: netdev - add ipvlan supportTom Gundersen
2015-01-13doc: add cross-references between systemd.{link, netdev, network}Jan Engelhardt
2014-12-04networkd: support vxlan parametersSusant Sahani
V3: fix copy paste error V4: Make manual and config more readable Add vxlan paramertes to config.
2014-08-18networkd: warn when ignoring unsupported tuntap optionsTom Gundersen
The interface for creating tuntap devices should be ported to rtnl so it would support the same settings as other kinds. In the meantime, the best one can do is to drop in a .link file to set the desired options.
2014-07-21networkd: add support for bond optionsSusant Sahani
The following bond options are supported by this patch. MIIMonitorSec: Specifies the frequency in milli-seconds that MII link monitoring will occur. UpDelaySec: Specifies the delay time in milli-seconds to enable a link after a link up status has been detected. DownDelaySec: Specifies the delay time in milli-seconds to disable a link after a link failure has been detected. changes: 1. Added gconf variables. 2. man page conf: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad TransmitHashPolicy=layer2+3 LacpduTransmitRate=fast MIIMonitorSec=1s UpDelaySec=2s DownDelaySec=8s cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 1000 Up Delay (ms): 2000 Down Delay (ms): 8000 802.3ad info LACP rate: fast Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: rephrased manpage, dropped bond_ prefix from variables]
2014-07-21networkd: bond add support for lacp rateSusant Sahani
LacpduTransmitRate option specifies the rate in which link partner to transmit LACPDU packets in 802.3ad mode. Possible values slow : Request partner to transmit LACPDUs every 30 seconds fast : Request partner to transmit LACPDUs every 1 second The default is slow. chages: 1. Added enum bond_lacp_rate_table 2. gperf LacpduTransmitRate Test: conf file: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad LacpduTransmitRate=fast test: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: fast Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: renamed from LacpduTransmitRate to LACPTransmitRate, manpage fixes and dropped bond_ prefix from variables]
2014-07-21networkd: add support for bond transmit hash policySusant Sahani
This patch adds support the transmit hash policy to use for slave selection in balance-xor, 802.3ad, and tlb modes layer2, layer3+4, layer2+3, encap3+4, encap3+4 Added: 1. BondXmitHashPolicy 2. conf param TransmitHashPolicy Test conf: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad TransmitHashPolicy=layer2+3 test output: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: dropped bond_ prefix from new Bond variable, drop repeated man-page section]
2014-07-14man: systemd.netdev - make it clear that we do not touch preexisting netdevsTom Gundersen
We will happily use bridges/bonds as master devices, but we will not change their settings if they were created by someone else.