summaryrefslogtreecommitdiff
path: root/man/systemd.network.xml
AgeCommit message (Collapse)Author
2015-06-08Revert "networkd: create "kernel" setting for IPForwarding"Lennart Poettering
2015-06-02man: document IPForward=kernel optionNick Owens
2015-06-02man: replace hard-coded /usr/libDaniel Mack
Replace some /usr/lib occurences in man/ with &rootprefix;/lib.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-05-18man: explain UseDomains a bit moreZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=85397
2015-05-15man: IPMasquerade only implies IPForward=ipv4Benedikt Morbach
at least that's what the code does.
2015-05-15networkd: don't touch global forwarding settingBenedikt Morbach
This reverts commit 43c6d5abacaebf813845934ec8d5e5ee3c431854 (and a small part of 4046d8361c55c80ab8577aea52523b9e6eab0d0c) It turns out we don't actually need to set the global ip_forward setting. The only relevant setting is the one on each interface. What the global toggle actually does is switch forwarding on/off for all currently present interfaces and change the default for new ones. That means that by setting the global ip_forward we - Introduce a race condition, because if the interface with IPForward=yes is brought up after one with IPForward=no, both will have forwarding enabled, because the global switch turns it on for all interfaces. If the other interface comes up first networkd correctly sets forward=0 and it doesn't get overridden. - Change the forwarding setting for interfaces that networkd is not configured to touch, even if the user disabled forwarding via sysctl, either globally or per-interface As forwarding works fine without this, as long as all relevant interfacest individually set IPForward=yes: just drop it This means that non-networkd interfaces use the global default while networkd interfaces default to off if IPForward isn't given.
2015-04-28man: clarify that only the first .network file with a matching [Match] mattersLennart Poettering
http://lists.freedesktop.org/archives/systemd-devel/2015-April/031294.html
2015-04-24man: extend documentation on IPForward= and IPMasquerade=Lennart Poettering
Mention the default values, and clarify how this relates to the underlying sysctls.
2015-03-15network: add UseNTP DHCP optionMichael Marineau
Despite having the internal logic in place to enable/disable using NTP servers provided by DHCP the network config didn't expose the option.
2015-03-13man: fix a bunch of linksZbigniew Jędrzejewski-Szmek
All hail linkchecker!
2015-03-13man: update example 2 in systemd.network(5)Zbigniew Jędrzejewski-Szmek
none/both/v4/v6 are deprecated in favour of no/yes/ipv4/ipv6. https://bugs.freedesktop.org/show_bug.cgi?id=89221
2015-03-09Fix typosTorstein Husebø
2015-03-04networkd: Make DHCP client ID creation configurableJan Janssen
2015-02-27networkd: add support for Uplink Failure DetectionAlin Rauta
Introduce BindCarrier= to indicate the set of links that determine if the current link should be brought UP or DOWN. [tomegun: add a bit to commit message]
2015-02-14networkd: .network - rename LinkLocal to LinkLocalAddressingTom Gundersen
Makes it a bit less ambiguous.
2015-02-14man: systemd.network - document IPv6TokenTom Gundersen
2015-02-10net: support globbing and disjunction in Match logicTom Gundersen
Match{Name,OrginalName,Type,Driver,Path} can now take a space-separated glob of matches.
2015-02-09networkd: support route scopesTom Gundersen
For now we only support the hardcoded values RT_SCOPE_{UNIVERSE,LOCAL,HOST}, and not numerical values or values from /etc/iproute2/rt_scopes. This addresses https://bugs.freedesktop.org/show_bug.cgi?id=88508.
2015-02-09networkd: generalize IPv4LL to LinkLocalTom Gundersen
This allows both IPv4 and IPv6 link-local addresses to be enabled or disabled. By default we still enable IPv6LL and disable IPv4LL. The old config option is kept for backwards compatibility, but removed from the documentation.
2015-02-03Reindent man pages to 2chZbigniew Jędrzejewski-Szmek
2015-01-13networkd: make IP forwarding for IPv4 and IPv6 individually configurableLennart Poettering
2015-01-13networkd: introduce an AddressFamilyBoolean enum typeLennart Poettering
This introduces am AddressFamilyBoolean type that works more or less like a booleaan, but can optionally turn on/off things for ipv4 and ipv6 independently. THis also ports the DHCP field over to it.
2015-01-13doc: add cross-references between systemd.{link, netdev, network}Jan Engelhardt
2015-01-13networkd: add minimal IP forwarding and masquerading support to .network filesLennart Poettering
This adds two new settings to networkd's .network files: IPForwarding=yes and IPMasquerade=yes. The former controls the "forwarding" sysctl setting of the interface, thus controlling whether IP forwarding shall be enabled on the specific interface. The latter controls whether a firewall rule shall be installed that exposes traffic coming from the interface as coming from the local host to all other interfaces. This also enables both options by default for container network interfaces, thus making "systemd-nspawn --network-veth" have network connectivity out of the box.
2014-12-19networkd: integrate LLDPSusant Sahani
This patch integrates LLDP with networkd. Example conf: file : lldp.network [Match] Name=em1 [Network] LLDP=yes
2014-12-18networkd: add FDB supportAlin Rauta
2014-12-10networkd: rename section [BridgePort] → [Bridge]Lennart Poettering
Let's stick to generic sections that describe the general technology, instead of specific per-object sections, unless we really have a reason to do that otherwise.
2014-12-08networkd: update manpage for optional Gateway=Mantas Mikulėnas
Following commit 59580681f5f.
2014-12-05networkd: add basic [Link] settings to .network filesTom Gundersen
This allows the default link settings (set in .link files) to be overridden per Network. Only MTU and MACAddress is supported for now.
2014-12-04networkd: add support for source routingTom Gundersen
2014-12-04networkd: Add bridge port path costSusant Sahani
This patch add support to specify path cost of the bridge port to be configured via conf file. Exampe: conf file: br.netdev [NetDev] Name=br-test Kind=bridge file: br.network [Match] Name=em1 [Network] Bridge=br-test [BridgePort] Cost=332 bridge link 2: em1 state UP : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br-test state disabled priority 32 cost 332
2014-09-08networkd: allow specification of DHCP route metricAngus Gibson
This lets the routing metric for links to be specified per-network, still defaulting to DHCP_ROUTE_METRIC (1024) if unspecified. Hopefully this helps with multiple interfaces configured via DHCP.
2014-08-20man: fix typosRonny Chevalier
2014-08-15networkd: add support for Domains= to .network filesTom Gundersen
This allows the search/routing domanis to be specified per link/network and be passed on to resolved.
2014-08-15networkd: rename UseDomainName to UseDomainsTom Gundersen
This option will also apply to the search domains, so make it plural.
2014-08-15networkd: don't respect domainname from DHCP by defaultTom Gundersen
Most routers will send garbage, so make this opt-in only.
2014-08-12networkd: disable ipv4ll default routes by defaultTom Gundersen
This causes machines without connectivity to hang where they would otherwise fail. Keep it opt-in for now, but consider whether we sholud just drop it.
2014-08-04networkd: add and expose per-link LLMNR config optionTom Gundersen
2014-07-30man: fix outdated example in systemd.networkHong Shick Pak
The docs for the DHCP= was updated, but not the example.
2014-07-30networkd: ipv4ll - configure link-local address independently of DHCPv4Tom Gundersen
This changes the behavior when both DHCPv4 and IPv4LL are enabled. Before, we would disable IPv4LL when we got a DHCPv4 lease and enable it if the lease was lost. Now we just always set up both, if both are enabled, but the DHCPv4 addresses and routes will always take precedence due to their metric and scope.
2014-07-25networkd: ipv4ll - default to setting up ipv4ll routesTom Gundersen
This is necessary for non-ipv4ll hosts to communicate with ipv4ll-only hosts on the same link. Defaults to being enabled, but can be opted out. See: <http://avahi.org/wiki/AvahiAutoipd#Routes>
2014-07-15sd-dhcp-client: make request broadcasts opt-inTom Gundersen
It appears there is no good way to decide whether or not broadcasts should be enabled, there is hardware that must have broadcast, and there are networks that only allow unicast. So we give up and make this configurable. By default, unicast is used, but if the kernel were to inform us abotu certain interfaces requiring broadcast, we could change this to opt-in by default in those cases.
2014-07-14networkd: dhcp add vendor class indentifier option 60Susant Sahani
Vendor Class Identifier be used by DHCP clients to identify their vendor type and configuration. When using this option, vendors can define their own specific identifier values, such as to convey a particular hardware or operating system configuration or other identifying information. Vendor-specified DHCP options—features that let administrators assign separate options to clients with similar configuration requirements. For example, if DHCP-aware clients for example we want to separate different gateway and option for different set of people (dev/test/hr/finance) in a org or devices for example web/database servers or let's say in a embedded device etc and require a different default gateway or DNS server than the rest of clients.
2014-07-14networkd: make metric of routes configurableSusant Sahani
Now route metric can be configuted via conf file: example conf: [Match] Name=em1 [Route] Gateway=192.168.1.12 Metric=10 Test: ip route output default via 192.168.1.12 dev em1 metric 10 [tomegun: squash TODO update and reword man page a bit]
2014-07-07man: network - document Peer keyTom Gundersen
2014-07-01networkd: send hostname to dhcp serverEugene Yakubovich
Send hostname (option 12) in DISCOVER and REQUEST messages so the DHCP server could use it to register with dynamic DNS and such. To opt-out of this behaviour set SendHostname to false in [DHCP] section of .network file [tomegun: rebased, made sure a failing set_hostname is a noop and moved config from DHCPv4 to DHCP]
2014-07-01man: bring systemd.network(5) up-to-dateTom Gundersen
Based on diff by 'poma'.
2014-06-29Add support for DHCP static route optionsEugene Yakubovich
This adds support for DHCP options 33 and 121: Static Route and Classless Static Route. To enable this feature, set UseRoutes=true in .network file. Returned routes are added to the routing table.
2014-06-29networkd: merge DHCPv4 and DHCPv6 configTom Gundersen
If there are v4 or v6 specific options we can keep those in separate sections, but for the common options, we will use only one. Moreovere only use DHCP=[yes/both|no/none|v4|v6] to enable or disable the clients.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-20 10:39:21 +0000