summaryrefslogtreecommitdiff
path: root/man/systemd.resource-control.xml
AgeCommit message (Collapse)Author
2016-06-14man: minor fixesLennart Poettering
2016-06-14core: optionally, accept a percentage value for MemoryLimit= and related ↵Lennart Poettering
settings If a percentage is used, it is taken relative to the installed RAM size. This should make it easier to write generic unit files that adapt to the local system.
2016-06-03core: always use "infinity" for no upper limit instead of "max" (#3417)Tejun Heo
Recently added cgroup unified hierarchy support uses "max" in configurations for no upper limit. While consistent with what the kernel uses for no upper limit, it is inconsistent with what systemd uses for other controllers such as memory or pids. There's no point in introducing another term. Update cgroup unified hierarchy support so that "infinity" is the only term that systemd uses for no upper limit.
2016-05-27core: add cgroup memory controller support on the unified hierarchy (#3315)Tejun Heo
On the unified hierarchy, memory controller implements three control knobs - low, high and max which enables more useable and versatile control over memory usage. This patch implements support for the three control knobs. * MemoryLow, MemoryHigh and MemoryMax are added for memory.low, memory.high and memory.max, respectively. * As all absolute limits on the unified hierarchy use "max" for no limit, make memory limit parse functions accept "max" in addition to "infinity" and document "max" for the new knobs. * Implement compatibility translation between MemoryMax and MemoryLimit. v2: - Fixed missing else's in config_parse_memory_limit(). - Fixed missing newline when writing out drop-ins. - Coding style updates to use "val > 0" instead of "val". - Minor updates to documentation.
2016-05-18core: translate between IO and BlockIO settings to ease transitionTejun Heo
Due to the substantial interface changes in cgroup unified hierarchy, new IO settings are introduced. Currently, IO settings apply only to unified hierarchy and BlockIO to legacy. While the transition is necessary, it's painful for users to have to provide configs for both. This patch implements translation from one config set to another for configs which make sense. * The translation takes place during application of the configs. Users won't see IO or BlockIO settings appearing without being explicitly created. * The translation takes place only if there is no config for the matching cgroup hierarchy type at all. While this doesn't provide comprehensive compatibility, it should considerably ease transition to the new IO settings which are a superset of BlockIO settings. v2: - Update test-cgroup-mask.c so that it accounts for the fact that CGROUP_MASK_IO and CGROUP_MASK_BLKIO move together. Also, test/parent.slice now sets IOWeight instead of BlockIOWeight.
2016-05-18core: add support for IOReadIOPSMax and IOWriteIOPSMaxTejun Heo
cgroup IO controller supports maximum limits for both bandwidth and IOPS but systemd resource control currently only supports bandwidth limits. This patch adds support for IOReadIOPSMax and IOWriteIOPSMax when unified cgroup hierarchy is in use. It isn't difficult to also add BlockIOReadIOPS and BlockIOWriteIOPS for legacy hierarchies but IO control on legacy hierarchies is half-broken anyway, so let's leave it alone for now.
2016-05-16man: clarify that IOXyz= only applies to the unified hierarchy, and ↵Lennart Poettering
BlockIOXyz= to the legacy hierarchy With this change for each setting we say which hierarachy it applies to briefly in the first sentence of the description, plus in longer form in an extra pargraph at the end, with a recommendation for the counterpart of the option in the other hierarchy. Also adds markup and the "=" suffix to all mentioned settings.
2016-05-05core: add io controller support on the unified hierarchyTejun Heo
On the unified hierarchy, blkio controller is renamed to io and the interface is changed significantly. * blkio.weight and blkio.weight_device are consolidated into io.weight which uses the standardized weight range [1, 10000] with 100 as the default value. * blkio.throttle.{read|write}_{bps|iops}_device are consolidated into io.max. Expansion of throttling features is being worked on to support work-conserving absolute limits (io.low and io.high). * All stats are consolidated into io.stats. This patchset adds support for the new interface. As the interface has been revamped and new features are expected to be added, it seems best to treat it as a separate controller rather than trying to expand the blkio settings although we might add automatic translation if only blkio settings are specified. * io.weight handling is mostly identical to blkio.weight[_device] handling except that the weight range is different. * Both read and write bandwidth settings are consolidated into CGroupIODeviceLimit which describes all limits applicable to the device. This makes it less painful to add new limits. * "max" can be used to specify the maximum limit which is equivalent to no config for max limits and treated as such. If a given CGroupIODeviceLimit doesn't contain any non-default configs, the config struct is discarded once the no limit config is applied to cgroup. * lookup_blkio_device() is renamed to lookup_block_device(). Signed-off-by: Tejun Heo <htejun@fb.com>
2016-04-05man: fix cgroup attributes for device throttlingMartin Pitt
2016-04-05man: update links to kernel.org cgroup documentationMartin Pitt
This recently moved from /cgroups/ to /cgroup-v1/. Fixes #2958
2016-02-10cgroup: remove support for NetClass= directiveDaniel Mack
Support for net_cls.class_id through the NetClass= configuration directive has been added in v227 in preparation for a per-unit packet filter mechanism. However, it turns out the kernel people have decided to deprecate the net_cls and net_prio controllers in v2. Tejun provides a comprehensive justification for this in his commit, which has landed during the merge window for kernel v4.5: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=bd1060a1d671 As we're aiming for full support for the v2 cgroup hierarchy, we can no longer support this feature. Userspace tool such as nftables are moving over to setting rules that are specific to the full cgroup path of a task, which obsoletes these controllers anyway. This commit removes support for tweaking details in the net_cls controller, but keeps the NetClass= directive around for legacy compatibility reasons.
2016-01-29man: document special considerations when mixing templated service units and ↵Lennart Poettering
DefaultDependencies=no Fixes #2189.
2015-11-13core: add new DefaultTasksMax= setting for system.confLennart Poettering
This allows initializing the TasksMax= setting of all units by default to some fixed value, instead of leaving it at infinity as before.
2015-11-11man: document automatic dependenciesLennart Poettering
For all units ensure there's an "Automatic Dependencies" section in the man page, and explain which dependencies are automatically added in all cases, and which ones are added on top if DefaultDependencies=yes is set. This is also done for systemd.exec(5), systemd.resource-control(5) and systemd.unit(5) as these pages describe common behaviour of various unit types.
2015-11-06doc: correct punctuation and improve typography in documentationJan Engelhardt
2015-10-19man: move documentation about NetClass from systemd.unit(5) to ↵Lennart Poettering
systemd.resource-control(5) This is after all where we expose all the other cgroup props, especially those that can be adjusted dynamically.
2015-09-11core: refactor cpu shares/blockio weight cgroup logicLennart Poettering
Let's stop using the "unsigned long" type for weights/shares, and let's just use uint64_t for this, as that's what we expose on the bus. Unify parsers, and always validate the range for these fields. Correct the default blockio weight to 500, since that's what the kernel actually uses. When parsing the weight/shares settings from unit files accept the empty string as a way to reset the weight/shares value. When getting it via the bus, uniformly map (uint64_t) -1 to unset. Open up StartupCPUShares= and StartupBlockIOWeight= to transient units.
2015-09-10core: add support for the "pids" cgroup controllerLennart Poettering
This adds support for the new "pids" cgroup controller of 4.3 kernels. It allows accounting the number of tasks in a cgroup and enforcing limits on it. This adds two new setting TasksAccounting= and TasksMax= to each unit, as well as a gloabl option DefaultTasksAccounting=. This also updated "cgtop" to optionally make use of the new kernel-provided accounting. systemctl has been updated to show the number of tasks for each service if it is available. This patch also adds correct support for undoing memory limits for units using a MemoryLimit=infinity syntax. We do the same for TasksMax= now and hence keep things in sync here.
2015-06-18man: revert dynamic paths for split-usr setupsTom Gundersen
This did not really work out as we had hoped. Trying to do this upstream introduced several problems that probably makes it better suited as a downstream patch after all. At any rate, it is not releaseable in the current state, so we at least need to revert this before the release. * by adjusting the path to binaries, but not do the same thing to the search path we end up with inconsistent man-pages. Adjusting the search path too would be quite messy, and it is not at all obvious that this is worth the effort, but at any rate it would have to be done before we could ship this. * this means that distributed man-pages does not make sense as they depend on config options, and for better or worse we are still distributing man pages, so that is something that definitely needs sorting out before we could ship with this patch. * we have long held that split-usr is only minimally supported in order to boot, and something we hope will eventually go away. So before we start adding even more magic/effort in order to make this work nicely, we should probably question if it makes sense at all.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-02-10man: boilerplate unificationZbigniew Jędrzejewski-Szmek
2015-01-22man: fix typosRonny Chevalier
2014-11-21man: add emacs header to get correct indention in nxml-mode for the manpage ↵Lennart Poettering
XML files that use 2ch indenting In the long run we really should figure out if we want to stick with 8ch or 2ch indenting, and not continue with half-and-half. For now, just make emacs aware of the files that use 2ch indenting.
2014-11-05core: introduce new Delegate=yes/no property controlling creation of cgroup ↵Lennart Poettering
subhierarchies For priviliged units this resource control property ensures that the processes have all controllers systemd manages enabled. For unpriviliged services (those with User= set) this ensures that access rights to the service cgroup is granted to the user in question, to create further subgroups. Note that this only applies to the name=systemd hierarchy though, as access to other controllers is not safe for unpriviliged processes. Delegate=yes should be set for container scopes where a systemd instance inside the container shall manage the hierarchies below its own cgroup and have access to all controllers. Delegate=yes should also be set for user@.service, so that systemd --user can run, controlling its own cgroup tree. This commit changes machined, systemd-nspawn@.service and user@.service to set this boolean, in order to ensure that container management will just work, and the user systemd instance can run fine.
2014-10-15man: fix copy/paste error in CPUQuota= section of resource-controlDavid Strauss
2014-05-24man: reword StartupCPUShares= descriptionZbigniew Jędrzejewski-Szmek
Now that we have two options described in the same paragraph, we cannot use singular anymore.
2014-05-22cgroups: simplify CPUQuota= logicLennart Poettering
Only accept cpu quota values in percentages, get rid of period definition. It's not clear whether the CFS period controllable per-cgroup even has a future in the kernel, hence let's simplify all this, hardcode the period to 100ms and only accept percentage based quota values.
2014-05-22cgroup: rework startup logicLennart Poettering
Introduce a (unsigned long) -1 as "unset" state for cpu shares/block io weights, and keep the startup unit set around all the time.
2014-05-22core: add startup resource control optionWaLyong Cho
Similar to CPUShares= and BlockIOWeight= respectively. However only assign the specified weight during startup. Each control group attribute is re-assigned as weight by CPUShares=weight and BlockIOWeight=weight after startup. If not CPUShares= or BlockIOWeight= be specified, then the attribute is re-assigned to each default attribute value. (default cpu.shares=1024, blkio.weight=1000) If only CPUShares=weight or BlockIOWeight=weight be specified, then that implies StartupCPUShares=weight and StartupBlockIOWeight=weight.
2014-05-06doc: adhere to XML syntaxJan Engelhardt
2014-04-25core: expose CFS CPU time quota as high-level unit propertiesLennart Poettering
2014-03-11core: support globbing matches in DeviceAllow= when checking for device groupsLennart Poettering
2014-02-24core: add global settings for enabling CPUAccounting=, MemoryAccounting=, ↵Lennart Poettering
BlockIOAccounting= for all units at once
2014-02-23core: clean up some confusing regarding SI decimal and IEC binary suffixes ↵Lennart Poettering
for sizes According to Wikipedia it is customary to specify hardware metrics and transfer speeds to the basis 1000 (SI decimal), while software metrics and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary). So far we specified everything in IEC, let's fix that and be more true to what's otherwise customary. Since we don't want to parse "Mi" instead of "M" we document each time what the context used is.
2014-02-22cgroup: Extend DeviceAllow= syntax to whitelist groups of devices, not just ↵Lennart Poettering
particular devices nodes
2013-10-15man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted. I guess I can just skip over reporting ubiquitous comma placement fixes…
2013-09-30man: link cgroups api docs from relevant man pagesLennart Poettering
2013-09-27man: drop references to "cgroup" wher appropriateLennart Poettering
Since cgroups are mostly now an implementation detail of systemd lets deemphasize it a bit in the man pages. This renames systemd.cgroup(5) to systemd.resource-control(5) and uses the term "resource control" rather than "cgroup" where appropriate. This leaves the word "cgroup" in at a couple of places though, like for example systemd-cgtop and systemd-cgls where cgroup stuff is at the core of what is happening.