summaryrefslogtreecommitdiff
path: root/man/systemd.service.xml
AgeCommit message (Collapse)Author
2015-06-27systemd.service.xml: document that systemd removes the PIDFileFelipe Sateler
2015-06-22man: remove links to outdated kdbus development repositoryKay Sievers
2015-06-18man: revert dynamic paths for split-usr setupsTom Gundersen
This did not really work out as we had hoped. Trying to do this upstream introduced several problems that probably makes it better suited as a downstream patch after all. At any rate, it is not releaseable in the current state, so we at least need to revert this before the release. * by adjusting the path to binaries, but not do the same thing to the search path we end up with inconsistent man-pages. Adjusting the search path too would be quite messy, and it is not at all obvious that this is worth the effort, but at any rate it would have to be done before we could ship this. * this means that distributed man-pages does not make sense as they depend on config options, and for better or worse we are still distributing man pages, so that is something that definitely needs sorting out before we could ship with this patch. * we have long held that split-usr is only minimally supported in order to boot, and something we hope will eventually go away. So before we start adding even more magic/effort in order to make this work nicely, we should probably question if it makes sense at all.
2015-06-15man: document that ExecStop= needs a synchronous toolLennart Poettering
As requested in #199.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-05-11treewide: Correct typos and spell plural of bus consistentTorstein Husebø
2015-03-09man: document that ExecStartPre= is not the place to start long-running ↵Lennart Poettering
processes
2015-02-10man: boilerplate unificationZbigniew Jędrzejewski-Szmek
2015-02-03Reindent man pages to 2chZbigniew Jędrzejewski-Szmek
2015-01-27man: systemd.service(5): add some simple examplesChristian Seiler
Add a couple of exampels, at least one for each service type that include some explanations and pointers to various relevant options.
2015-01-06core: add new logic for services to store file descriptors in PID 1Lennart Poettering
With this change it is possible to send file descriptors to PID 1, via sd_pid_notify_with_fds() which PID 1 will store individually for each service, and pass via the usual fd passing logic on next invocation. This is useful for enable daemon reload schemes where daemons serialize their state to /run, push their fds into PID 1 and terminate, restoring their state on next start from the data in /run and passed in from PID 1. The fds are kept by PID 1 as long as no POLLHUP or POLLERR is seen on them, and the service they belong to are either not dead or failed, or have a job queued.
2014-12-18load-fragment: allow quoting in command name and document allowed escapesZbigniew Jędrzejewski-Szmek
The handling of the command name and other arguments is unified. This simplifies things and should make them more predictable for users. Incidentally, this makes ExecStart handling match the .desktop file specification, apart for the requirment for an absolute path. https://bugs.freedesktop.org/show_bug.cgi?id=86171
2014-11-30man: BusName= is not optional for Type!=busUmut Tezduyar Lindskog
http://lists.freedesktop.org/archives/systemd-devel/2014-November/025492.html
2014-11-30core: warn and ignore SysVStartPriority=Zbigniew Jędrzejewski-Szmek
Option was being parsed but not used for anything.
2014-10-28core: send sigabrt on watchdog timeout to get the stacktraceUmut Tezduyar Lindskog
if sigabrt doesn't do the job, follow regular shutdown routine, sigterm > sigkill.
2014-10-20man: try to reword explanation of Sockets= a bitLennart Poettering
2014-10-15man: fix typosJan Synacek
2014-10-07man: document stripping of quotesZbigniew Jędrzejewski-Szmek
2014-10-07man: move commandline parsing to a separate sectionZbigniew Jędrzejewski-Szmek
It is very long already, and obscures the description of ExecStart, and it is about to get longer.
2014-09-22man: fix typo and add linkZbigniew Jędrzejewski-Szmek
2014-09-08bus: parse BusPolicy directive in service filesDaniel Mack
Add a new directive called BusPolicy to define custom endpoint policies. If one such directive is given, an endpoint object in the service's ExecContext is created and the given policy is added to it.
2014-09-06man: fix references to systemctl man page which is now in section 1Michael Biebl
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=760613
2014-08-22core: introduce "poweroff" as new failure action typesLennart Poettering
Also, change the default action on a system start-up timeout to powering off.
2014-08-22core: add support for a configurable system-wide start-up timeoutLennart Poettering
When this system-wide start-up timeout is hit we execute one of the failure actions already implemented for services that fail. This should not only be useful on embedded devices, but also on laptops which have the power-button reachable when the lid is closed. This devices, when in a backpack might get powered on by accident due to the easily reachable power button. We want to make sure that the system turns itself off if it starts up due this after a while. When the system manages to fully start-up logind will suspend the machine by default if the lid is closed. However, in some cases we don't even get as far as logind, and the boot hangs much earlier, for example because we ask for a LUKS password that nobody ever enters. Yeah, this is a real-life problem on my Yoga 13, which has one of those easily accessible power buttons, even if the device is closed.
2014-08-21service: allow services of Type=oneshot that specify no ExecStart= commandsLennart Poettering
This is useful for services that simply want to run something on shutdown, but not at bootup. They should only set ExecStop= but leave ExecStart= unset.
2014-08-07man: correct references to DefaultTimeout*SecZbigniew Jędrzejewski-Szmek
Noticed by thp on #systemd.
2014-07-03man: reference RestartForceExitStatus= from the Restart= descriptionLennart Poettering
2014-07-03core: introduce new RestartForceExitStatus= service settingLennart Poettering
This does the inverse of RestartPreventExitStatus=: it forces a restart of a service when a certain exit status is returned by a service process.
2014-06-28doc: grammatical correctionsJan Engelhardt
2014-06-05core: introduce new Restart=on-abnormal settingLennart Poettering
Restart=on-abnormal is similar to Restart=on-failure, but avoids restarts on unclean exit codes (but still doing restarts on all obviously unclean exits, such as timeouts, signals, coredumps, watchdog timeouts). Also see: https://fedorahosted.org/fpc/ticket/191
2014-05-16man: fix some minor language typosLennart Poettering
2014-05-16man: clarify that the ExecReload= command should be synchronousLennart Poettering
http://lists.freedesktop.org/archives/systemd-devel/2014-May/019054.html
2014-04-24service: add FailureAction= optionMichael Olbrich
It has the same possible values as StartLimitAction= and is executed immediately if a service fails.
2014-04-21service: add support for reboot argument when triggered by StartLimitAction=Michael Olbrich
When rebooting with systemctl, an optional argument can be passed to the reboot system call. This makes it possible the specify the argument in a service file and use it when the service triggers a restart. This is useful to distinguish between manual reboots and reboots caused by failing services.
2014-02-21man: there is no ExecStopPre= for service unitsLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=73177
2014-02-17doc: update punctuationJan Engelhardt
Resolve spotted issues related to missing or extraneous commas, dashes.
2014-02-17Revert "man: systemd.service(5): clarify behavior of SuccessExitStatus"Lennart Poettering
This reverts commit 29e254f7f093c07a1ec7e845e60203357f585235. Conflicts: man/systemd.service.xml
2014-02-14man: use spaces instead of tabsJason St. John
Several sections of the man pages included intermixed tabs and spaces; this commit replaces all tabs with spaces.
2014-02-14man: replace STDOUT with standard output, etc.Zbigniew Jędrzejewski-Szmek
Actually 'STDOUT' is something that doesn't appear anywhere: in the stdlib we have 'stdin', and there's only the constant STDOUT_FILENO, so there's no reason to use capitals. When refering to code, STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in other places they are replaced with normal phrases like standard output, etc.
2014-02-14man: fix grammatical errors and other formatting issuesJason St. John
* standardize capitalization of STDIN, STDOUT, and STDERR * reword some sentences for clarity * reflow some very long lines to be shorter than ~80 characters * add some missing <literal>, <constant>, <varname>, <option>, and <filename> tags
2014-02-14man: always place <programlisting> and </programlisting> in a line with ↵Lennart Poettering
actual sources, so that we don't get spurious newlines in the man page output
2014-02-14man: systemd.service(5): clarify behavior of SuccessExitStatusDave Reisner
The behavior of this is a little cryptic in that $MAINPID must exit as a direct result of receiving a signal in order for a listed signal to be considered a success condition.
2014-01-09man: mention which variables will be expanded in ExecStartZbigniew Jędrzejewski-Szmek
2013-12-27man: add a note about propagating signalsZbigniew Jędrzejewski-Szmek
2013-12-27man: fix Type= reference v2Zbigniew Jędrzejewski-Szmek
grawity: It looks like the old version _was_ correct – the default value will be "Type=dbus" if the service has a BusName set. Suggested change: "if neither Type= nor BusName= is specified"
2013-12-26man: fix Type= referenceMarcos Felipe Rasia de Mello
Simple man page fix attached. -- Marcos From 268d10a2f8769fd1dcb9440670af15ac02c5df89 Mon Sep 17 00:00:00 2001 From: Marcos Mello <marcosfrm@gmail.com> Date: Thu, 26 Dec 2013 17:19:04 -0200 Subject: [PATCH 1/1] man: fix Type= reference
2013-12-25man: grammar and wording improvementsJan Engelhardt
This is a recurring submission and includes corrections to: - missing words, preposition choice. - change of /lib to /usr/lib, because that is what most distros are using as the system-wide location for systemd/udev files.
2013-12-25man: improvements to comma placementJan Engelhardt
This is a recurring submission and includes corrections to: comma placement.
2013-12-25man: resolve word omissionsJan Engelhardt
This is a recurring submission and includes corrections to: word omissions and word class choice.
2013-12-14man: remove advice to avoid setting the same var more than onceZbigniew Jędrzejewski-Szmek
So far the compatibility with .desktop settings hasn't been imporant at all, and we do not want people to write convoluted unit files.