| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
The third paragraph of the Description already linked to
systemd.resource-control(5), but it was missing from the list of
additional options for the [Service] section.
|
|
|
|
|
|
The manpage claimed that ExecStop would be followed immediately by
SIGKILL, whereas the actual behavior is to go through KillMode= and
KillSignal= first.
Fixes #4490
|
|
Fixes: #4521
|
|
As requested in
https://github.com/systemd/systemd/pull/4864#pullrequestreview-12372557.
docbook will substitute triple dots for the ellipsis in man output, so this has
no effect on the troff output, only on HTML, making it infinitesimally nicer.
In some places we show output from programs, which use dots, and those places
should not be changed. In some tables, the alignment would change if dots were
changed to the ellipsis which is only one character. Since docbook replaces the
ellipsis automatically, we should leave those be. This patch changes all other
places.
|
|
Our warning message was misleading, because we wouldn't "correct" anything,
we'd just ignore unkown escapes. Update the message.
Also, print just the extracted word (which contains the offending sequences) in
the message, instead of the whole line.
Fixes #4697.
|
|
Setting NotifyAccess=exec allows notifications coming directly from any
control process.
|
|
|
|
Let's say that this was not obvious from our man page.
|
|
Fixes #4410. Also includes two minor improvements to the previous
sentence.
|
|
Fixes: #4116
|
|
|
|
ExecStop=/ExecStopPost= commands
This should simplify monitoring tools for services, by passing the most basic
information about service result/exit information via environment variables,
thus making it unnecessary to retrieve them explicitly via the bus.
|
|
As suggested by @mbiebl we already use the "!" special char in unit file
assignments for negation, hence we should not use it in a different context for
privileged execution. Let's use "+" instead.
|
|
Type=notify has a magic overriding case where a NotifyAccess=none
is turned into a NotifyAccess=main for sanity purposes.
This makes docs more clear about such behavior:
https://github.com/systemd/systemd/blob/2787d83c28b7565ea6f80737170514e5e6186917/src/core/service.c#L650:L651
|
|
This patch implements the new magic character '!'. By putting '!' in front
of a command, systemd executes it with full privileges ignoring paramters
such as User, Group, SupplementaryGroups, CapabilityBoundingSet,
AmbientCapabilities, SecureBits, SystemCallFilter, SELinuxContext,
AppArmorProfile, SmackProcessLabel, and RestrictAddressFamilies.
Fixes partially https://github.com/systemd/systemd/issues/3414
Related to https://github.com/coreos/rkt/issues/2482
Testing:
1. Create a user 'bob'
2. Create the unit file /etc/systemd/system/exec-perm.service
(You can use the example below)
3. sudo systemctl start ext-perm.service
4. Verify that the commands starting with '!' were not executed as bob,
4.1 Looking to the output of ls -l /tmp/exec-perm
4.2 Each file contains the result of the id command.
`````````````````````````````````````````````````````````````````
[Unit]
Description=ext-perm
[Service]
Type=oneshot
TimeoutStartSec=0
User=bob
ExecStartPre=!/usr/bin/sh -c "/usr/bin/rm /tmp/exec-perm*" ;
/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-start-pre"
ExecStart=/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-start" ;
!/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-star-2"
ExecStartPost=/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-start-post"
ExecReload=/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-reload"
ExecStop=!/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-stop"
ExecStopPost=/usr/bin/sh -c "/usr/bin/id > /tmp/exec-perm-stop-post"
[Install]
WantedBy=multi-user.target]
`````````````````````````````````````````````````````````````````
|
|
This hopefully reduces confusion resulting in issues like #2992.
|
|
Remove kdbus custom endpoint support
|
|
|
|
This feature will not be used anytime soon, so remove a bit of cruft.
The BusPolicy= config directive will stay around as compat noop.
|
|
Fixes: #846
|
|
unit, not just services
This moves the StartLimitBurst=, StartLimitInterval=, StartLimitAction=, RebootArgument= from the [Service] section
into the [Unit] section of unit files, and thus support it in all unit types, not just in services.
This way we can enforce the start limit much earlier, in particular before testing the unit conditions, so that
repeated start-up failure due to failed conditions is also considered for the start limit logic.
For compatibility the four options may also be configured in the [Service] section still, but we only document them in
their new section [Unit].
This also renamed the socket unit failure code "service-failed-permanent" into "service-start-limit-hit" to express
more clearly what it is about, after all it's only triggered through the start limit being hit.
Finally, the code in busname_trigger_notify() and socket_trigger_notify() is altered to become more alike.
Fixes: #2467
|
|
This makes sure we never run two control processes at the same time, we cannot keep track off.
This introduces a slight change of behaviour but cleans up the definition of ExecStop= and ExecStopPost=. The former is
now invoked only if the service managed to start-up correctly. The latter is called even if start-up failed half-way.
Thus, ExecStopPost= may be used as clean-up step for both successful and failed start-up attempts, but ExecStop='s
purpose is clearly defined as being responsible for shutting down the service and nothing else.
The precise behaviour of this was not documented yet. This commit adds the necessary docs.
Fixes: #1254
|
|
|
|
DefaultDependencies=no
Fixes #2189.
|
|
* add info about sd_event_set_watchdog
* add missing Restart values
|
|
This completes the set of man pages for sd-event and contains some minor
other fixes for other man pages too.
The sd_event_set_name(3) man page is renamed to
sd_event_source_set_description(3), which is the correct name of the
concept today.
|
|
|
|
For all units ensure there's an "Automatic Dependencies" section in the
man page, and explain which dependencies are automatically added in all
cases, and which ones are added on top if DefaultDependencies=yes is
set.
This is also done for systemd.exec(5), systemd.resource-control(5) and
systemd.unit(5) as these pages describe common behaviour of various unit
types.
|
|
|
|
|
|
|
|
|
|
|
|
This convention is almost universal in systemd man pages, and makes
it easier to visually parse the docs.
Also fix some markup along the way.
|
|
Also reword some ungainly grammar constructs.
|
|
|
|
Previously it was just descibed that ExecStartPost= commands were
started "after" the ExecStart= command(s).
This hasn't specified after which event, which varies from after it has
been started, after it has exited, after it has sent READY=1 or after it
has taken the bus name, depending on Type=.
This now describes that it happens after the *service* has "started",
as defined by the Type=, and provides some clarification about precisely
when this is.
This may be unnecessary duplication, but it removes the ambiguity as to
whether RemainAfterExit=no means that ExecStartPost= shouldn't be
started because it means the service has stopped when the ExecStart=
command terminates, not "started".
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1251334
is about a unit file which has
Environment=TERM=linux PS1=system-upgrade:\w\$\x20
We used to allow that, but after recent tightening of parsing
rules, we barf. Make it clear that this is intentional.
|
|
|
|
|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
As requested in #199.
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
|
|
processes
|
|
|
