Age | Commit message (Collapse) | Author |
|
|
|
|
|
|
|
This adds support for naming file descriptors passed using socket
activation. The names are passed in a new $LISTEN_FDNAMES= environment
variable, that matches the existign $LISTEN_FDS= one and contains a
colon-separated list of names.
This also adds support for naming fds submitted to the per-service fd
store using FDNAME= in the sd_notify() message.
This also adds a new FileDescriptorName= setting for socket unit files
to set the name for fds created by socket units.
This also adds a new call sd_listen_fds_with_names(), that is similar to
sd_listen_fds(), but also returns the names of the fds.
systemd-activate gained the new --fdname= switch to specify a name for
testing socket activation.
This is based on #1247 by Maciej Wereski.
Fixes #1247.
|
|
Writable= is a new boolean setting. If ture, then ListenSpecial= will
open the specified path in O_RDWR mode, rather than just O_RDONLY.
This is useful for implementing services like rfkill, where /dev/rfkill
is more useful when opened in write mode, if we want to not only save
but also restore its state.
|
|
|
|
This convention is almost universal in systemd man pages, and makes
it easier to visually parse the docs.
Also fix some markup along the way.
|
|
Also reword some ungainly grammar constructs.
|
|
|
|
|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
|
|
All hail linkchecker!
|
|
|
|
|
|
|
|
|
|
|
|
This makes possible to spawn service instances triggered by socket with
MLS/MCS SELinux labels which are created based on information provided by
connected peer.
Implementation of label_get_child_mls_label derived from xinetd.
Reviewed-by: Paul Moore <pmoore@redhat.com>
|
|
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=760613
|
|
|
|
This is what we have done so far for all other time values, and hence we
should do this here. This indicates the default unit of time values
specified here, if they don't contain a unit.
|
|
This reverts commit cf8bd44339b00330fdbc91041d6731ba8aba9fec.
Needs more discussion on the mailing list.
|
|
This makes possible to spawn service instances triggered by socket with
MLS/MCS SELinux labels which are created based on information provided by
connected peer.
Implementation of label_get_child_label derived from xinetd.
Reviewed-by: Paul Moore <pmoore@redhat.com>
|
|
TCP_DEFER_ACCEPT Allow a listener to be awakened only when data
arrives on the socket. If TCP_DEFER_ACCEPT set on a server-side
listening socket, the TCP/IP stack will not to wait for the final
ACK packet and not to initiate the process until the first packet
of real data has arrived. After sending the SYN/ACK, the server will
then wait for a data packet from a client. Now, only three packets
will be sent over the network, and the connection establishment delay
will be significantly reduced.
|
|
The tcp keep alive variables now can be configured via conf
parameter. Follwing variables are now supported by this patch.
tcp_keepalive_intvl: The number of seconds between TCP keep-alive probes
tcp_keepalive_probes: The maximum number of TCP keep-alive probes to
send before giving up and killing the connection if no response is
obtained from the other end.
tcp_keepalive_time: The number of seconds a connection needs to be
idle before TCP begins sending out keep-alive probes.
|
|
This reverts commit 9528592ff8d7ff361da430285deba8196e8984d5.
Apparently TFO is actually the default at least for the server side now.
Also the setsockopt doesn't actually take a bool, but a qlen integer.
|
|
TCP Fast Open (TFO) speeds up the opening of successiveTCP)
connections between two endpoints.It works by using a TFO cookie
in the initial SYN packet to authenticate a previously connected
client. It starts sending data to the client before the receipt
of the final ACK packet of the three way handshake is received,
skipping a round trip and lowering the latency in the start of
transmission of data.
|
|
This patch adds support for TCP TCP_NODELAY socket option. This can be
configured via NoDelay conf parameter. TCP Nagle's algorithm works by
combining a number of small outgoing messages, and sending them all at
once. This controls the TCP_NODELAY socket option.
|
|
Noticed by thp on #systemd.
|
|
It is annoying when we have dead links on fd.o.
Add project='man-pages|die-net|archlinux' to <citerefentry>-ies.
In generated html, add external links to
http://man7.org/linux/man-pages/man, http://linux.die.net/man/,
https://www.archlinux.org/.
By default, pages in sections 2 and 4 go to man7, since Michael
Kerrisk is the autorative source on kernel related stuff.
The rest of links goes to linux.die.net, because they have the
manpages.
Except for the pacman stuff, since it seems to be only available from
archlinux.org.
Poor gummiboot gets no link, because gummitboot(8) ain't to be found
on the net. According to common wisdom, that would mean that it does
not exist. But I have seen Kay using it, so I know it does, and
deserves to be found. Can somebody be nice and put it up somewhere?
|
|
|
|
system
This is relatively complex, as we cannot invoke NSS from PID 1, and thus
need to fork a helper process temporarily.
|
|
With Symlinks= we can manage one or more symlinks to AF_UNIX or FIFO
nodes in the file system, with the same lifecycle as the socket itself.
This has two benefits: first, this allows us to remove /dev/log and
/dev/initctl from /dev, thus leaving only symlinks, device nodes and
directories in the /dev tree. More importantly however, this allows us
to move /dev/log out of /dev, while still making it accessible there, so
that PrivateDevices= can provide /dev/log too.
|
|
|
|
This patch exchange words which are inappropriate for a situation,
deletes duplicated words, and adds particles where needed.
|
|
for sizes
According to Wikipedia it is customary to specify hardware metrics and
transfer speeds to the basis 1000 (SI decimal), while software metrics
and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary).
So far we specified everything in IEC, let's fix that and be more
true to what's otherwise customary. Since we don't want to parse "Mi"
instead of "M" we document each time what the context used is.
|
|
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
|
|
Resolve spotted issues related to missing or extraneous commas, dashes.
|
|
Several sections of the man pages included intermixed tabs and spaces;
this commit replaces all tabs with spaces.
|
|
Actually 'STDOUT' is something that doesn't appear anywhere: in the
stdlib we have 'stdin', and there's only the constant STDOUT_FILENO,
so there's no reason to use capitals. When refering to code,
STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in
other places they are replaced with normal phrases like standard
output, etc.
|
|
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=727708#1694
|
|
This is a recurring submission and includes corrections to:
word omissions and word class choice.
|
|
This is a recurring submission and includes corrections to various
issue spotted: comma setting, missing words/preposition choice.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=71132
Patch adds DefaultTimeoutStartSec, DefaultTimeoutStopSec, DefaultRestartSec
configuration options to manager configuration file.
|
|
Since cgroups are mostly now an implementation detail of systemd lets
deemphasize it a bit in the man pages. This renames systemd.cgroup(5) to
systemd.resource-control(5) and uses the term "resource control" rather
than "cgroup" where appropriate.
This leaves the word "cgroup" in at a couple of places though, like for
example systemd-cgtop and systemd-cgls where cgroup stuff is at the core
of what is happening.
|
|
This is a recurring submission and includes corrections to various
issue spotted. I guess I can just skip over reporting ubiquitous
comma placement fixes…
Highligts in this particular commit:
- the "unsigned" type qualifier is completed to form a full type
"unsigned int"
- alphabetic -> lexicographic (that way we automatically define how
numbers get sorted)
|
|
|
|
|