summaryrefslogtreecommitdiff
path: root/man/systemd.socket.xml
AgeCommit message (Collapse)Author
2015-09-22man: Add documentation for functionfs socket activationPawel Szewczyk
2015-07-25man: typo fixesThomas Hindoe Paaboel Andersen
2015-06-18man: revert dynamic paths for split-usr setupsTom Gundersen
This did not really work out as we had hoped. Trying to do this upstream introduced several problems that probably makes it better suited as a downstream patch after all. At any rate, it is not releaseable in the current state, so we at least need to revert this before the release. * by adjusting the path to binaries, but not do the same thing to the search path we end up with inconsistent man-pages. Adjusting the search path too would be quite messy, and it is not at all obvious that this is worth the effort, but at any rate it would have to be done before we could ship this. * this means that distributed man-pages does not make sense as they depend on config options, and for better or worse we are still distributing man pages, so that is something that definitely needs sorting out before we could ship with this patch. * we have long held that split-usr is only minimally supported in order to boot, and something we hope will eventually go away. So before we start adding even more magic/effort in order to make this work nicely, we should probably question if it makes sense at all.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-03-13man: link to freebsd.org for inetd(8)Zbigniew Jędrzejewski-Szmek
2015-03-13man: fix a bunch of linksZbigniew Jędrzejewski-Szmek
All hail linkchecker!
2015-03-10add REMOTE_ADDR and REMOTE_PORT for Accept=yesShawn Landden
2015-02-10man: boilerplate unificationZbigniew Jędrzejewski-Szmek
2015-02-03Reindent man pages to 2chZbigniew Jędrzejewski-Szmek
2014-10-27man: fix typos in description of SELinuxContextFromNet=Ivan Shapovalov
2014-10-15man: fix typosJan Synacek
2014-09-19socket: introduce SELinuxContextFromNet optionMichal Sekletar
This makes possible to spawn service instances triggered by socket with MLS/MCS SELinux labels which are created based on information provided by connected peer. Implementation of label_get_child_mls_label derived from xinetd. Reviewed-by: Paul Moore <pmoore@redhat.com>
2014-09-06man: fix references to systemctl man page which is now in section 1Michael Biebl
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=760613
2014-08-30Fix a few more typosRuben Kerkhof
2014-08-19socket: suffix newly added TCP sockopt time properties with "Sec"Lennart Poettering
This is what we have done so far for all other time values, and hence we should do this here. This indicates the default unit of time values specified here, if they don't contain a unit.
2014-08-19Revert "socket: introduce SELinuxLabelViaNet option"Lennart Poettering
This reverts commit cf8bd44339b00330fdbc91041d6731ba8aba9fec. Needs more discussion on the mailing list.
2014-08-19socket: introduce SELinuxLabelViaNet optionMichal Sekletar
This makes possible to spawn service instances triggered by socket with MLS/MCS SELinux labels which are created based on information provided by connected peer. Implementation of label_get_child_label derived from xinetd. Reviewed-by: Paul Moore <pmoore@redhat.com>
2014-08-14socket: Add support for TCP defer acceptSusant Sahani
TCP_DEFER_ACCEPT Allow a listener to be awakened only when data arrives on the socket. If TCP_DEFER_ACCEPT set on a server-side listening socket, the TCP/IP stack will not to wait for the final ACK packet and not to initiate the process until the first packet of real data has arrived. After sending the SYN/ACK, the server will then wait for a data packet from a client. Now, only three packets will be sent over the network, and the connection establishment delay will be significantly reduced.
2014-08-14socket: Add Support for TCP keep alive variablesSusant Sahani
The tcp keep alive variables now can be configured via conf parameter. Follwing variables are now supported by this patch. tcp_keepalive_intvl: The number of seconds between TCP keep-alive probes tcp_keepalive_probes: The maximum number of TCP keep-alive probes to send before giving up and killing the connection if no response is obtained from the other end. tcp_keepalive_time: The number of seconds a connection needs to be idle before TCP begins sending out keep-alive probes.
2014-08-14Revert "socket: add support for TCP fast Open"Lennart Poettering
This reverts commit 9528592ff8d7ff361da430285deba8196e8984d5. Apparently TFO is actually the default at least for the server side now. Also the setsockopt doesn't actually take a bool, but a qlen integer.
2014-08-14socket: add support for TCP fast OpenSusant Sahani
TCP Fast Open (TFO) speeds up the opening of successiveTCP) connections between two endpoints.It works by using a TFO cookie in the initial SYN packet to authenticate a previously connected client. It starts sending data to the client before the receipt of the final ACK packet of the three way handshake is received, skipping a round trip and lowering the latency in the start of transmission of data.
2014-08-14socket: add support for tcp nagleSusant Sahani
This patch adds support for TCP TCP_NODELAY socket option. This can be configured via NoDelay conf parameter. TCP Nagle's algorithm works by combining a number of small outgoing messages, and sending them all at once. This controls the TCP_NODELAY socket option.
2014-08-07man: correct references to DefaultTimeout*SecZbigniew Jędrzejewski-Szmek
Noticed by thp on #systemd.
2014-07-07man: add a mapping for external manpagesZbigniew Jędrzejewski-Szmek
It is annoying when we have dead links on fd.o. Add project='man-pages|die-net|archlinux' to <citerefentry>-ies. In generated html, add external links to http://man7.org/linux/man-pages/man, http://linux.die.net/man/, https://www.archlinux.org/. By default, pages in sections 2 and 4 go to man7, since Michael Kerrisk is the autorative source on kernel related stuff. The rest of links goes to linux.die.net, because they have the manpages. Except for the pacman stuff, since it seems to be only available from archlinux.org. Poor gummiboot gets no link, because gummitboot(8) ain't to be found on the net. According to common wisdom, that would mean that it does not exist. But I have seen Kay using it, so I know it does, and deserves to be found. Can somebody be nice and put it up somewhere?
2014-06-28doc: grammatical correctionsJan Engelhardt
2014-06-05socket: add SocketUser= and SocketGroup= for chown()ing sockets in the file ↵Lennart Poettering
system This is relatively complex, as we cannot invoke NSS from PID 1, and thus need to fork a helper process temporarily.
2014-06-04socket: add new Symlinks= option for socket unitsLennart Poettering
With Symlinks= we can manage one or more symlinks to AF_UNIX or FIFO nodes in the file system, with the same lifecycle as the socket itself. This has two benefits: first, this allows us to remove /dev/log and /dev/initctl from /dev, thus leaving only symlinks, device nodes and directories in the /dev tree. More importantly however, this allows us to move /dev/log out of /dev, while still making it accessible there, so that PrivateDevices= can provide /dev/log too.
2014-06-04socket: optionally remove sockets/FIFOs in the file system after useLennart Poettering
2014-05-07doc: corrections to words and formsJan Engelhardt
This patch exchange words which are inappropriate for a situation, deletes duplicated words, and adds particles where needed.
2014-02-23core: clean up some confusing regarding SI decimal and IEC binary suffixes ↵Lennart Poettering
for sizes According to Wikipedia it is customary to specify hardware metrics and transfer speeds to the basis 1000 (SI decimal), while software metrics and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary). So far we specified everything in IEC, let's fix that and be more true to what's otherwise customary. Since we don't want to parse "Mi" instead of "M" we document each time what the context used is.
2014-02-17doc: resolve missing/extraneous words or inappropriate formsJan Engelhardt
Issues fixed: * missing words required by grammar * duplicated or extraneous words * inappropriate forms (e.g. singular/plural), and declinations * orthographic misspellings
2014-02-17doc: update punctuationJan Engelhardt
Resolve spotted issues related to missing or extraneous commas, dashes.
2014-02-14man: use spaces instead of tabsJason St. John
Several sections of the man pages included intermixed tabs and spaces; this commit replaces all tabs with spaces.
2014-02-14man: replace STDOUT with standard output, etc.Zbigniew Jędrzejewski-Szmek
Actually 'STDOUT' is something that doesn't appear anywhere: in the stdlib we have 'stdin', and there's only the constant STDOUT_FILENO, so there's no reason to use capitals. When refering to code, STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in other places they are replaced with normal phrases like standard output, etc.
2013-12-30man: expand on some more subtle points in systemd.socket(5)Zbigniew Jędrzejewski-Szmek
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=727708#1694
2013-12-25man: resolve word omissionsJan Engelhardt
This is a recurring submission and includes corrections to: word omissions and word class choice.
2013-11-07man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted: comma setting, missing words/preposition choice.
2013-11-05Configurable Timeouts/Restarts default valuesOleksii Shevchuk
https://bugs.freedesktop.org/show_bug.cgi?id=71132 Patch adds DefaultTimeoutStartSec, DefaultTimeoutStopSec, DefaultRestartSec configuration options to manager configuration file.
2013-09-27man: drop references to "cgroup" wher appropriateLennart Poettering
Since cgroups are mostly now an implementation detail of systemd lets deemphasize it a bit in the man pages. This renames systemd.cgroup(5) to systemd.resource-control(5) and uses the term "resource control" rather than "cgroup" where appropriate. This leaves the word "cgroup" in at a couple of places though, like for example systemd-cgtop and systemd-cgls where cgroup stuff is at the core of what is happening.
2013-09-12man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted. I guess I can just skip over reporting ubiquitous comma placement fixes… Highligts in this particular commit: - the "unsigned" type qualifier is completed to form a full type "unsigned int" - alphabetic -> lexicographic (that way we automatically define how numbers get sorted)
2013-08-23man: make reference to bind(2) explicitShawn Landden
2013-07-13man: wording and grammar updateJan Engelhardt
2013-07-12man: document the slice and scope units, add systemd.cgroup(5)Zbigniew Jędrzejewski-Szmek
2013-07-12man: use <literal> not <filename> for suffixesZbigniew Jędrzejewski-Szmek
Especially sentences like "filename ends in .suffix" are easier to parse if the suffix is surrounded by quotes. In sentences like "requires a .service unit", where the suffix is used as a class designation, there is no need to use quotes.
2013-07-11basic SO_REUSEPORT supportShawn Landden
2013-07-02man: add more formatting markupZbigniew Jędrzejewski-Szmek
2013-07-02man: improve grammar and word formatting in numerous man pagesJason St. John
Use proper grammar, word usage, adjective hyphenation, commas, capitalization, spelling, etc. To improve readability, some run-on sentences or sentence fragments were revised. [zj: remove the space from 'file name', 'host name', and 'time zone'.]
2013-06-26man: use <constant> for various constants which look ugly with quotesZbigniew Jędrzejewski-Szmek
2013-06-20man: document that shutdown() is only sometimes OK on sockets passed in via ↵Lennart Poettering
socket activation
2013-06-19Describe handling of an AF_UNIX socketŁukasz Stelmach
Describe how to handle an AF_UNIX socket, with Accept set to false, received from systemd, upon exit. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>