| Age | Commit message (Collapse) | Author |
|---|
|
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=760613
|
|
|
|
This is what we have done so far for all other time values, and hence we
should do this here. This indicates the default unit of time values
specified here, if they don't contain a unit.
|
|
This reverts commit cf8bd44339b00330fdbc91041d6731ba8aba9fec.
Needs more discussion on the mailing list.
|
|
This makes possible to spawn service instances triggered by socket with
MLS/MCS SELinux labels which are created based on information provided by
connected peer.
Implementation of label_get_child_label derived from xinetd.
Reviewed-by: Paul Moore <pmoore@redhat.com>
|
|
TCP_DEFER_ACCEPT Allow a listener to be awakened only when data
arrives on the socket. If TCP_DEFER_ACCEPT set on a server-side
listening socket, the TCP/IP stack will not to wait for the final
ACK packet and not to initiate the process until the first packet
of real data has arrived. After sending the SYN/ACK, the server will
then wait for a data packet from a client. Now, only three packets
will be sent over the network, and the connection establishment delay
will be significantly reduced.
|
|
The tcp keep alive variables now can be configured via conf
parameter. Follwing variables are now supported by this patch.
tcp_keepalive_intvl: The number of seconds between TCP keep-alive probes
tcp_keepalive_probes: The maximum number of TCP keep-alive probes to
send before giving up and killing the connection if no response is
obtained from the other end.
tcp_keepalive_time: The number of seconds a connection needs to be
idle before TCP begins sending out keep-alive probes.
|
|
This reverts commit 9528592ff8d7ff361da430285deba8196e8984d5.
Apparently TFO is actually the default at least for the server side now.
Also the setsockopt doesn't actually take a bool, but a qlen integer.
|
|
TCP Fast Open (TFO) speeds up the opening of successiveTCP)
connections between two endpoints.It works by using a TFO cookie
in the initial SYN packet to authenticate a previously connected
client. It starts sending data to the client before the receipt
of the final ACK packet of the three way handshake is received,
skipping a round trip and lowering the latency in the start of
transmission of data.
|
|
This patch adds support for TCP TCP_NODELAY socket option. This can be
configured via NoDelay conf parameter. TCP Nagle's algorithm works by
combining a number of small outgoing messages, and sending them all at
once. This controls the TCP_NODELAY socket option.
|
|
Noticed by thp on #systemd.
|
|
It is annoying when we have dead links on fd.o.
Add project='man-pages|die-net|archlinux' to <citerefentry>-ies.
In generated html, add external links to
http://man7.org/linux/man-pages/man, http://linux.die.net/man/,
https://www.archlinux.org/.
By default, pages in sections 2 and 4 go to man7, since Michael
Kerrisk is the autorative source on kernel related stuff.
The rest of links goes to linux.die.net, because they have the
manpages.
Except for the pacman stuff, since it seems to be only available from
archlinux.org.
Poor gummiboot gets no link, because gummitboot(8) ain't to be found
on the net. According to common wisdom, that would mean that it does
not exist. But I have seen Kay using it, so I know it does, and
deserves to be found. Can somebody be nice and put it up somewhere?
|
|
|
|
system
This is relatively complex, as we cannot invoke NSS from PID 1, and thus
need to fork a helper process temporarily.
|
|
With Symlinks= we can manage one or more symlinks to AF_UNIX or FIFO
nodes in the file system, with the same lifecycle as the socket itself.
This has two benefits: first, this allows us to remove /dev/log and
/dev/initctl from /dev, thus leaving only symlinks, device nodes and
directories in the /dev tree. More importantly however, this allows us
to move /dev/log out of /dev, while still making it accessible there, so
that PrivateDevices= can provide /dev/log too.
|
|
|
|
This patch exchange words which are inappropriate for a situation,
deletes duplicated words, and adds particles where needed.
|
|
for sizes
According to Wikipedia it is customary to specify hardware metrics and
transfer speeds to the basis 1000 (SI decimal), while software metrics
and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary).
So far we specified everything in IEC, let's fix that and be more
true to what's otherwise customary. Since we don't want to parse "Mi"
instead of "M" we document each time what the context used is.
|
|
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
|
|
Resolve spotted issues related to missing or extraneous commas, dashes.
|
|
Several sections of the man pages included intermixed tabs and spaces;
this commit replaces all tabs with spaces.
|
|
Actually 'STDOUT' is something that doesn't appear anywhere: in the
stdlib we have 'stdin', and there's only the constant STDOUT_FILENO,
so there's no reason to use capitals. When refering to code,
STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in
other places they are replaced with normal phrases like standard
output, etc.
|
|
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=727708#1694
|
|
This is a recurring submission and includes corrections to:
word omissions and word class choice.
|
|
This is a recurring submission and includes corrections to various
issue spotted: comma setting, missing words/preposition choice.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=71132
Patch adds DefaultTimeoutStartSec, DefaultTimeoutStopSec, DefaultRestartSec
configuration options to manager configuration file.
|
|
Since cgroups are mostly now an implementation detail of systemd lets
deemphasize it a bit in the man pages. This renames systemd.cgroup(5) to
systemd.resource-control(5) and uses the term "resource control" rather
than "cgroup" where appropriate.
This leaves the word "cgroup" in at a couple of places though, like for
example systemd-cgtop and systemd-cgls where cgroup stuff is at the core
of what is happening.
|
|
This is a recurring submission and includes corrections to various
issue spotted. I guess I can just skip over reporting ubiquitous
comma placement fixes…
Highligts in this particular commit:
- the "unsigned" type qualifier is completed to form a full type
"unsigned int"
- alphabetic -> lexicographic (that way we automatically define how
numbers get sorted)
|
|
|
|
|
|
|
|
Especially sentences like "filename ends in .suffix" are easier to
parse if the suffix is surrounded by quotes. In sentences like
"requires a .service unit", where the suffix is used as a class
designation, there is no need to use quotes.
|
|
|
|
|
|
Use proper grammar, word usage, adjective hyphenation, commas,
capitalization, spelling, etc.
To improve readability, some run-on sentences or sentence fragments were
revised.
[zj: remove the space from 'file name', 'host name', and 'time zone'.]
|
|
|
|
socket activation
|
|
Describe how to handle an AF_UNIX socket, with Accept set to false,
received from systemd, upon exit.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
|
|
|
|
|
|
|
|
New sections are added: PAM options, crypttab options, commandline
options, miscellaneous. The last category will be used for all
untagged <varname> elements.
Commandline options sections is meant to be a developer tool: when
adding an option it is sometimes useful to be able to check if
similarly named options exist elsewhere.
|
|
resetting the lists
https://bugzilla.redhat.com/show_bug.cgi?id=756787
|
|
systemd.directives(5) is renamed to systemd.directives(7).
Section 7 is "Miscellaneous".
|
|
This was never intended to be pushed.
This reverts commit aea54018a5e66a41318afb6c6be745b6aef48d9e.
|
|
Since we already allow defining the mode of AF_UNIX sockets and FIFO, it
makes sense to also allow specific user/group ownership of the socket
file for restricting access.
|
|
|
|
Fixes a few more typos. Also changes a "Accept=no" to
"Accept=false" to be consistent with the previous examples
in the same man page.
|
|
This adds SMACK label configuration options to socket units.
SMACK labels should be applied to most objects on disk well before
execution time, but two items remain that are generated dynamically
at run time that require SMACK labels to be set in order to enforce
MAC on all objects.
Files on disk can be labelled using package management.
For device nodes, simple udev rules are sufficient to add SMACK labels
at boot/insertion time.
Sockets can be created at run time and systemd does just that for
several services. In order to protect FIFO's and UNIX domain sockets,
we must instruct systemd to apply SMACK labels at runtime.
This patch adds the following options:
Smack - applicable to FIFO's.
SmackIpIn/SmackIpOut - applicable to sockets.
No external dependencies are required to support SMACK, as setting
the labels is done using fsetxattr(). The labels can be set on a
kernel that does not have SMACK enabled either, so there is no need
to #ifdef any of this code out.
For more information about SMACK, please see Documentation/Smack.txt
in the kernel source code.
v3 of this patch changes the config options to be CamelCased.
|
|
As you likely know, Arch Linux is in the process of moving to systemd.
So I was reading through the various systemd docs and quickly became
baffled by this new abbreviation "resp.", which I've never seen before
in my English-mother-tongue life.
Some quick Googling turned up a reference:
<http://www.transblawg.eu/index.php?/archives/870-Resp.-and-other-non-existent-English-wordsNicht-existente-englische-Woerter.html>
I guess it's a literal translation of the German "Beziehungsweise", but
English doesn't work the same way. The word "respectively" is used
exclusively to provide an ordering connection between two lists. E.g.
"the prefixes k, M, and G refer to kilo-, mega-, and giga-,
respectively." It is also never abbreviated to "resp." So the sentence
"Sets the default output resp. error output for all services and
sockets" makes no sense to a natural English speaker.
This patch removes all instances of "resp." in the man pages and
replaces them with sentences which are much more clear and, hopefully,
grammatically valid. In almost all instances, it was simply replacing
"resp." with "or," which the original author (Lennart?) could probably
just do in the future.
The only other instances of "resp." are in the src/ subtree, which I
don't feel privileged to correct.
Signed-off-by: Andrew Eikum <aeikum@codeweavers.com>
|
