summaryrefslogtreecommitdiff
path: root/man/systemd.unit.xml
AgeCommit message (Collapse)Author
2016-05-02core: move enforcement of the start limit into per-unit-type code againLennart Poettering
Let's move the enforcement of the per-unit start limit from unit.c into the type-specific files again. For unit types that know a concept of "result" codes this allows us to hook up the start limit condition to it with an explicit result code. Also, this makes sure that the state checks in clal like service_start() may be done before the start limit is checked, as the start limit really should be checked last, right before everything has been verified to be in order. The generic start limit logic is left in unit.c, but the invocation of it is moved into the per-type files, in the various xyz_start() functions, so that they may place the check at the right location. Note that this change drops the enforcement entirely from device, slice, target and scope units, since these unit types generally may not fail activation, or may only be activated a single time. This is also documented now. Note that restores the "start-limit-hit" result code that existed before 6bf0f408e4833152197fb38fb10a9989c89f3a59 already in the service code. However, it's not introduced for all units that have a result code concept. Fixes #3166.
2016-04-30Merge pull request #3152 from poettering/aliasfixZbigniew Jędrzejewski-Szmek
Refuse aliases to non-aliasable units in more places Fixes #2730.
2016-04-29man: document that some unit types do not support unit aliases via symlinksLennart Poettering
2016-04-29core: rename StartLimitInterval= to StartLimitIntervalSec=Lennart Poettering
We generally follow the rule that for time settings we suffix the setting name with "Sec" to indicate the default unit if none is specified. The only exception was the rate limiting interval settings. Fix this, and keep the old names for compatibility. Do the same for journald's RateLimitInterval= setting
2016-04-29core: move start ratelimiting check after condition checksLennart Poettering
With #2564 unit start rate limiting was moved from after the condition checks are to before they are made, in an attempt to fix #2467. This however resulted in #2684. However, with a previous commit a concept of per socket unit trigger rate limiting has been added, to fix #2467 more comprehensively, hence the start limit can be moved after the condition checks again, thus fixing #2684. Fixes: #2684
2016-04-12man: shorten the list of unit file paths a bitLennart Poettering
Let's make this more digestable to read by making the list of documented unit file paths a bit shorter. Specifically, let's drop references to $XDG_CONFIG_HOME and $XDG_DATA_HOME, as their default values are listed too already. Given that the fact that the XDG basedir spec makes these paths configurable is probably not a strong point of the spec, let's drop the reference to the env vars, and keep only the literal, default paths for them in the list. Of course, we do support the full XDG basedir spec in this regard, but it's one thing to implement it and another one to recommend it by documenting it. Replace "$HOME" by "~", because UNIX.
2016-02-23man: clarify unit ordering languageIan Kelling
2016-02-10man: follow up fixes for #2575Zbigniew Jędrzejewski-Szmek
2016-02-10man: document that [Install] has no effect in unit file .d/*.conf drop-insLennart Poettering
Fixes: #1774 Fixes: #1090
2016-02-10man: document distinction between ConditionXYZ= and AssertXYZ=Lennart Poettering
References: #2468
2016-02-10core: treat JobTimeout=0 as equivalent to JobTimeout=infinityLennart Poettering
Corrects an incompatibility introduced with 36c16a7cdd6c33d7980efc2cd6a2211941f302b4. Fixes: #2537
2016-02-10core: make the StartLimitXYZ= settings generic and apply to any kind of ↵Lennart Poettering
unit, not just services This moves the StartLimitBurst=, StartLimitInterval=, StartLimitAction=, RebootArgument= from the [Service] section into the [Unit] section of unit files, and thus support it in all unit types, not just in services. This way we can enforce the start limit much earlier, in particular before testing the unit conditions, so that repeated start-up failure due to failed conditions is also considered for the start limit logic. For compatibility the four options may also be configured in the [Service] section still, but we only document them in their new section [Unit]. This also renamed the socket unit failure code "service-failed-permanent" into "service-start-limit-hit" to express more clearly what it is about, after all it's only triggered through the start limit being hit. Finally, the code in busname_trigger_notify() and socket_trigger_notify() is altered to become more alike. Fixes: #2467
2016-01-22Merge pull request #2409 from snakeroot/dropin-doc-2Daniel Mack
man: describe precedence of drop-in .conf files over unit files
2016-01-21man: describe precedence of drop-in .conf files over unit filesChris Atkinson
2016-01-15man: fix typosJakub Wilk
2015-12-26man: fix typosJakub Wilk
2015-11-13Merge pull request #1869 from poettering/kill-overridableMichal Schmidt
Remove support for RequiresOverridable= and RequisiteOverridable=
2015-11-12core: remove support for RequiresOverridable= and RequisiteOverridable=Lennart Poettering
As discussed at systemd.conf 2015 and on also raised on the ML: http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html This removes the two XyzOverridable= unit dependencies, that were basically never used, and do not enhance user experience in any way. Most folks looking for the functionality this provides probably opt for the "ignore-dependencies" job mode, and that's probably a good idea. Hence, let's simplify systemd's dependency engine and remove these two dependency types (and their inverses). The unit file parser and the dbus property parser will now redirect the settings/properties to result in an equivalent non-overridable dependency. In the case of the unit file parser we generate a warning, to inform the user. The dbus properties for this unit type stay available on the unit objects, but they are now hidden from usual introspection and will always return the empty list when queried. This should provide enough compatibility for the few unit files that actually ever made use of this.
2015-11-12core: simplify handling of %u, %U, %s and %h unit file specifiersLennart Poettering
Previously, the %u, %U, %s and %h specifiers would resolve to the user name, numeric user ID, shell and home directory of the user configured in the User= setting of a unit file, or the user of the manager instance if no User= setting was configured. That at least was the theory. In real-life this was not ever actually useful: - For the systemd --user instance it made no sense to ever set User=, since the instance runs in user context after all, and hence the privileges to change user IDs don't even exist. The four specifiers were actually not useful at all in this case. - For the systemd --system instance we did not allow any resolving that would require NSS. Hence, %s and %h were not supported, unless User=root was set, in which case they would be hardcoded to /bin/sh and /root, to avoid NSS. Then, %u would actually resolve to whatever was set with User=, but %U would only resolve to the numeric UID of that setting if the User= was specified in numeric form, or happened to be root (in which case 0 was hardcoded as mapping). Two of the specifiers are entirely useless in this case, one is realistically also useless, and one is pretty pointless. - Resolving of these settings would only happen if User= was actually set *before* the specifiers where resolved. This behaviour was undocumented and is really ugly, as specifiers should actually be considered something that applies to the whole file equally, independently of order... With this change, %u, %U, %s and %h are drastically simplified: they now always refer to the user that is running the service instance, and the user configured in the unit file is irrelevant. For the system instance of systemd this means they always resolve to "root", "0", "/bin/sh" and "/root", thus avoiding NSS. For the user instance, to the data for the specific user. The new behaviour is identical to the old behaviour in all --user cases and for all units that have no User= set (or set to "0" or "root").
2015-11-11man: document automatic dependenciesLennart Poettering
For all units ensure there's an "Automatic Dependencies" section in the man page, and explain which dependencies are automatically added in all cases, and which ones are added on top if DefaultDependencies=yes is set. This is also done for systemd.exec(5), systemd.resource-control(5) and systemd.unit(5) as these pages describe common behaviour of various unit types.
2015-11-10Remove snapshot unit typeZbigniew Jędrzejewski-Szmek
Snapshots were never useful or used for anything. Many systemd developers that I spoke to at systemd.conf2015, didn't even know they existed, so it is fairly safe to assume that this type can be deleted without harm. The fundamental problem with snapshots is that the state of the system is dynamic, devices come and go, users log in and out, timers fire... and restoring all units to some state from the past would "undo" those changes, which isn't really possible. Tested by creating a snapshot, running the new binary, and checking that the transition did not cause errors, and the snapshot is gone, and snapshots cannot be created anymore. New systemctl says: Unknown operation snapshot. Old systemctl says: Failed to create snapshot: Support for snapshots has been removed. IgnoreOnSnaphost settings are warned about and ignored: Support for option IgnoreOnSnapshot= has been removed and it is ignored http://lists.freedesktop.org/archives/systemd-devel/2015-November/034872.html
2015-11-09Merge pull request #1799 from jengelh/docLennart Poettering
doc: typo and ortho fixes
2015-11-09detect-virt: add rkt app container runtimeIago López Galeiras
2015-11-06doc: use expanded forms for written styleJan Engelhardt
2015-11-06doc: correct orthography, word forms and missing/extraneous wordsJan Engelhardt
2015-11-06doc: correct punctuation and improve typography in documentationJan Engelhardt
2015-10-31man: MANAGER_SYSTEM understands SYSTEMD_UNIT_PATH tooEvgeny Vereshchagin
2015-10-19man: move documentation about NetClass from systemd.unit(5) to ↵Lennart Poettering
systemd.resource-control(5) This is after all where we expose all the other cgroup props, especially those that can be adjusted dynamically.
2015-09-30man: add link to kernel docs for net_clsZbigniew Jędrzejewski-Szmek
2015-09-16cgroup: add support for net_cls controllersDaniel Mack
Add a new config directive called NetClass= to CGroup enabled units. Allowed values are positive numbers for fix assignments and "auto" for picking a free value automatically, for which we need to keep track of dynamically assigned net class IDs of units. Introduce a hash table for this, and also record the last ID that was given out, so the allocator can start its search for the next 'hole' from there. This could eventually be optimized with something like an irb. The class IDs up to 65536 are considered reserved and won't be assigned automatically by systemd. This barrier can be made a config directive in the future. Values set in unit files are stored in the CGroupContext of the unit and considered read-only. The actually assigned number (which may have been chosen dynamically) is stored in the unit itself and is guaranteed to remain stable as long as the unit is active. In the CGroup controller, set the configured CGroup net class to net_cls.classid. Multiple unit may share the same net class ID, and those which do are linked together.
2015-09-06nspawn: add new .nspawn files for container settingsLennart Poettering
.nspawn fiels are simple settings files that may accompany container images and directories and contain settings otherwise passed on the nspawn command line. This provides an efficient way to attach execution data directly to containers.
2015-07-29man: unit: fix StartTimeoutSecHerman Fries
should be TimeoutStartSec
2015-06-18man: revert dynamic paths for split-usr setupsTom Gundersen
This did not really work out as we had hoped. Trying to do this upstream introduced several problems that probably makes it better suited as a downstream patch after all. At any rate, it is not releaseable in the current state, so we at least need to revert this before the release. * by adjusting the path to binaries, but not do the same thing to the search path we end up with inconsistent man-pages. Adjusting the search path too would be quite messy, and it is not at all obvious that this is worth the effort, but at any rate it would have to be done before we could ship this. * this means that distributed man-pages does not make sense as they depend on config options, and for better or worse we are still distributing man pages, so that is something that definitely needs sorting out before we could ship with this patch. * we have long held that split-usr is only minimally supported in order to boot, and something we hope will eventually go away. So before we start adding even more magic/effort in order to make this work nicely, we should probably question if it makes sense at all.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-05-05treewide: fix typosTorstein Husebø
2015-03-13man: fix a bunch of linksZbigniew Jędrzejewski-Szmek
All hail linkchecker!
2015-03-04man: replace obsolete wiki link with man pageZachary Cook
2015-02-09treewide: correct typos and use consistent "MAC" spellingTorstein Husebø
2015-02-03Reindent man pages to 2chZbigniew Jędrzejewski-Szmek
2015-01-27man: systemd.unit(5): add examples for common tasksChristian Seiler
Add examples for (a) how to allow units to be enabled and (b) overriding vendor settings to the man page.
2015-01-26man: minor typo fixLennart Poettering
Spotted by John Paul Adrian Glaubitz
2015-01-08doc: fix stale references to systemd-verifyDave Reisner
This was subsumed into systemd-analyze back in 142c4ecaa98.
2015-01-05man: clarify path escaping and reference systemd-escapeChris Atkinson
This patch adds more detail to the description of how path escaping operates and provides a pointer to the systemd-escape program. Either would serve to answer the question raised in the bug report, so hopefully this will allow it to be closed. https://bugs.freedesktop.org/show_bug.cgi?id=87688
2014-12-25man: add a note why %U,%h,%s are mostly uselessZbigniew Jędrzejewski-Szmek
The reasons were already given in the description of %U, but the are easy to overlook, and it's better to be explicit to avoid confusion.
2014-11-06man: document that we don't document .include on purposeLennart Poettering
<!-- xml comments are useful! -->
2014-11-06man: don't document ConditionNull=/AssertNull= as the are not particularly ↵Lennart Poettering
useful and simply confusing
2014-11-06core: introduce the concept of AssertXYZ= similar to ConditionXYZ=, but ↵Lennart Poettering
fatal for a start job if not met
2014-11-03core: introduce ConditionSecurity=auditLennart Poettering
And conditionalize journald audit support with it
2014-10-28job: optionally, when a job timeout is hit, also execute a failure actionLennart Poettering
2014-10-15man: we don't have 'Wanted' dependencyLukas Nykryn