summaryrefslogtreecommitdiff
path: root/man/tmpfiles.d.xml
AgeCommit message (Collapse)Author
2015-11-03Fixed link to chattr man pagekayrus
2015-10-22tmpfiles: introduce "q" and "Q" for creating quota-enabled btrfs subvolumesLennart Poettering
This allows us to set up the quota group hierarchy in a reasonable way on btrfs file systems.
2015-10-19man: tmpfiles.d: add info about age fieldEvgeny Vereshchagin
The age field applies to lines starting with `v`, `C`, `X` too. See the function `clean_item` in the file `src/tmpfiles/tmpfiles.c`
2015-06-18man: revert dynamic paths for split-usr setupsTom Gundersen
This did not really work out as we had hoped. Trying to do this upstream introduced several problems that probably makes it better suited as a downstream patch after all. At any rate, it is not releaseable in the current state, so we at least need to revert this before the release. * by adjusting the path to binaries, but not do the same thing to the search path we end up with inconsistent man-pages. Adjusting the search path too would be quite messy, and it is not at all obvious that this is worth the effort, but at any rate it would have to be done before we could ship this. * this means that distributed man-pages does not make sense as they depend on config options, and for better or worse we are still distributing man pages, so that is something that definitely needs sorting out before we could ship with this patch. * we have long held that split-usr is only minimally supported in order to boot, and something we hope will eventually go away. So before we start adding even more magic/effort in order to make this work nicely, we should probably question if it makes sense at all.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-04-22man: elaborate on the order by which tmpfiles operations are executedLennart Poettering
2015-04-13man: slightly fewer paragraphs can help readabilityLennart Poettering
2015-04-13man: fix examples indentation in tmpfiles.d(5)Lennart Poettering
2015-04-13man: add information about more lines to explanation of argument fieldLennart Poettering
2015-04-13man: document which tmpfiles line types follow symlinksLennart Poettering
Generally, we will not follow symlinks, except for "w". Avoid documentation for now for fifo, device node, directory lines, which currently follow symlinks but better shouldn't.
2015-03-19man: add h/H to tmpfiles.d(5)Goffredo Baroncelli
2015-03-10tmpfiles: port to unquote_many_words()daurnimator
2015-02-23man: explain time units in tmpfilesZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1195294
2015-01-22shared/acl-util: add mask only when needed, always add base ACLsZbigniew Jędrzejewski-Szmek
For ACLs to be valid, a set of entries for user, group, and other must be always present. Always add those entries. While at it, only add the mask ACL if it is actually required, i.e. when at least on ACL for non-owner group or user exists.
2015-01-22tmpfiles: implement augmenting of existing ACLsZbigniew Jędrzejewski-Szmek
This is much more useful in practice (equivalent to setfacl -m).
2015-01-22tmpfiles: make t and a globby, add their recursive versions T and AZbigniew Jędrzejewski-Szmek
For types which adapt existing files it is generally more useful to accept globs. In analogy to z and Z, add recursive versions using uppercase letters. Technically, making a accept globs is backwards incompatible, but in practice it probably isn't yet widely used and we can assume that most people don't create files with wildcards in names. Functions which are used as callbacks, but not directly on items, are renamed not to have "item_" prefix.
2015-01-22tmpfiles: add 'a' type to set ACLsZbigniew Jędrzejewski-Szmek
2015-01-22tmpfiles: attach an array of items to each pathZbigniew Jędrzejewski-Szmek
The data structure used by tmpfiles is changed: instead of hashmaps mapping {path → Item*} we now have hashmaps containing {path -> ItemArray}, where ItemArray contains a pointer to an array of Items. For current code it doesn't matter much, but when we add new types it is easier to simply add a new Item for a given path, then to coalesce multiple lines into one Item. In the future, this change will also make it possible to remember the file and line where each Item originates, and use that in reporting errors. Currently this is not possible, since each Item can be created from multiple lines.
2015-01-18man: reindent tmpfiles.d(5)Zbigniew Jędrzejewski-Szmek
Reindent to 2 spaces, use more markup.
2014-12-28tmpfiles: add new line type 'v' for creating btrfs subvolumesLennart Poettering
2014-12-04tmpfiles, man: Add xattr support to tmpfilesMaciej Wereski
This patch makes it possible to set extended attributes on files created by tmpfiles. This can be especially used to set SMACK security labels on volatile files and directories. It is done by adding new line of type "t". Such line should contain attributes in Argument field, using following format: name=value All other fields are ignored. If value contains spaces, then it must be surrounded by quotation marks. User can also put quotation mark in value by escaping it with backslash. Example: D /var/run/cups - - - - t /var/run/cups - - - - security.SMACK64=printing
2014-11-04man/tmpfiles.d: fix typoJan Synacek
2014-10-27man: tmpfiles.d - recommend using b! and c!Tom Gundersen
We should avoid creating static device nodes at runtime.
2014-06-28doc: typographical improvements and choice of wordsJan Engelhardt
2014-06-28doc: grammatical correctionsJan Engelhardt
2014-06-20tmpfiles: copy/link /usr/share/factory/ files when the source argument is ↵Kay Sievers
omitted
2014-06-19tmpfiles: make sure "C" doesn't copy anything if the destination already existsLennart Poettering
Previously it would recursively copy the entire tree in, and descend into subdirectories even if the destination already exists. Let's do what the documentation says and not do that. If files down the tree shall be copied too, they should get their own "C" lines.
2014-06-18tmpfiles: add "+" modifier support to b, c, p lines in addition to LLennart Poettering
2014-06-16tmpfiles: add new "L+" command as stronger version of "L", that removes the ↵Lennart Poettering
destination before creating a symlink Also, make use of this for mtab as long as mount insists on creating it even if we invoke it with "-n".
2014-06-11tmpfiles: add ability to mask access mode by pre-existing access mode on ↵Lennart Poettering
files/directories This way it makes a lot more sense to specify an access mode for "Z" lines.
2014-06-11tmpfiles: when processing lines, always process prefixes before suffixesLennart Poettering
If two lines refer to paths that are suffix and prefix of each other, then always process the prefix first, the suffix second. In all other cases strictly process rules in the order they appear in the files. This makes creating /var/run as symlink to /run a lot more fun, since it is automatically created first.
2014-06-10tmpfiles: get rid of "m" lines, make them redundant by "z"Lennart Poettering
"m" so far has been a non-globbing version of "z". Since this makes it quite redundant, let's get rid of it. Remove "m" from the man pages, beef up "z" docs instead, and make "m" nothing more than a compatibility alias for "z".
2014-06-10tmpfiles: add new "C" line for copying files or directoriesLennart Poettering
2014-05-07doc: comma placement corrections and word orderJan Engelhardt
Set commas where there should be some. Some improvements to word order.
2014-03-03core: introduce new RuntimeDirectory= and RuntimeDirectoryMode= unit settingsLennart Poettering
As discussed on the ML these are useful to manage runtime directories below /run for services.
2014-02-25Replace /var/run with /run in remaining placesZbigniew Jędrzejewski-Szmek
/run was already used almost everywhere, fix the remaining places for consistency.
2014-02-14man: always place <programlisting> and </programlisting> in a line with ↵Lennart Poettering
actual sources, so that we don't get spurious newlines in the man page output
2014-02-10nspawn,man: use a common vocabulary when referring to selinux security contextsLennart Poettering
Let's always call the security labels the same way: SMACK: "Smack Label" SELINUX: "SELinux Security Context" And the low-level encapsulation is called "seclabel". Now let's hope we stick to this vocabulary in future, too, and don't mix "label"s and "security contexts" and so on wildly.
2013-12-30tmpfiles: rename --unsafe to --bootZbigniew Jędrzejewski-Szmek
As suggested by Kay, it is better to describe what is done, not what might happen.
2013-12-25man: resolve word omissionsJan Engelhardt
This is a recurring submission and includes corrections to: word omissions and word class choice.
2013-12-24tmpfiles: introduce the concept of unsafe operationsZbigniew Jędrzejewski-Szmek
Various operations done by systemd-tmpfiles may only be safely done at boot (e.g. removal of X lockfiles in /tmp, creation of /run/nologin). Other operations may be done at any point in time (e.g. setting the ownership on /{run,var}/log/journal). This distinction is largely orthogonal to the type of operation. A new switch --unsafe is added, and operations which should only be executed during bootup are marked with an exclamation mark in the configuration files. systemd-tmpfiles.service is modified to use this switch, and guards are added so it is hard to re-start it by mistake. If we install a new version of systemd, we actually want to enforce some changes to tmpfiles configuration immediately. This should now be possible to do safely, so distribution packages can be modified to execute the "safe" subset at package installation time. /run/nologin creation is split out into a separate service, to make it easy to override. https://bugzilla.redhat.com/show_bug.cgi?id=1043212 https://bugzilla.redhat.com/show_bug.cgi?id=1045849
2013-12-24man,units: tmpfiles.d(5) cleanupZbigniew Jędrzejewski-Szmek
Condition for /lib (necessary for split /usr) was missing from the unit. Some changes which were done in tmpfiles.d(5) were not carried over to systemd-tmpfiles(1). Also use markup where possible.
2013-10-15man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted. I guess I can just skip over reporting ubiquitous comma placement fixes…
2013-10-03man: Improve the description of parameter X in tmpfiles.d pageVáclav Pavlín
2013-09-17tmpfiles: add a new "m" line type that adjusts user/group/mode of a file if ↵Lennart Poettering
it exists
2013-09-17tmpfiles: support simple specifier expansion for specified pathsLennart Poettering
2013-09-12man: wording and grammar updatesJan Engelhardt
This is a recurring submission and includes corrections to various issue spotted. I guess I can just skip over reporting ubiquitous comma placement fixes… Highligts in this particular commit: - the "unsigned" type qualifier is completed to form a full type "unsigned int" - alphabetic -> lexicographic (that way we automatically define how numbers get sorted)
2013-09-12man: fix description of file order applicationKay Sievers
2013-09-10man: one more example in tmpfiles.dLukas Nykryn
2013-09-10man: wording and grammar updatesJan Engelhardt
This includes regularly-submitted corrections to comma setting and orthographical mishaps that appeared in man/ in recent commits. In this particular commit: - the usual comma fixes - expand contractions (this is prose)