| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This facility was never a proper solution, but only papered over
real bugs in the kernel. There are no known sysfs "timing bugs"
since a long time.
|
|
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
|
|
|
|
Replace some /usr/lib occurences in man/ with &rootprefix;/lib.
|
|
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
|
|
|
|
|
|
https://github.com/vlajos/misspell_fixer
https://github.com/torstehu/systemd/commit/b6fdeb618cf2f3ce1645b3315f15f482710c7ffa
Thanks to Torstein Husebo <torstein@huseboe.net>.
|
|
This pulls out the hwdb managment from udevadm into an independent tool.
The old code is left in place for backwards compatibility, and easy of
testing, but all documentation is dropped to encourage use of the new
tool instead.
|
|
XML files that use 2ch indenting
In the long run we really should figure out if we want to stick with 8ch
or 2ch indenting, and not continue with half-and-half. For now, just
make emacs aware of the files that use 2ch indenting.
|
|
In some cases it is preferable to ship system images with a pre-generated
binary hwdb database, to avoid having to build it at runtime, avoid shipping
the source hwdb files, or avoid storing large binary files in /etc.
So if hwdb.bin does not exist in /etc/udev/, fall back to looking for it in
UDEVLIBEXECDIR. This keeps the possibility to add files to /etc/udev/hwdb.d/
and re-generating the database which trumps the one in /usr/lib.
Add a new --usr flag to "udevadm hwdb --update" which puts the database
into UDEVLIBEXECDIR.
Adjust systemd-udev-hwdb-update.service to not generate the file in /etc if we
already have it in /usr.
|
|
This extends the udev parser to support OP_REMOVE (-=) and adds support
for TAG-= to remove previously set tags. We don't fail if the tag didn't
exist.
This is pretty handy if we ship default rules for seat-assignments and
users want to exclude specific devices from that. They can easily add
rules that drop any automatically added "seat" tags again.
|
|
|
|
|
|
|
|
|
|
for sizes
According to Wikipedia it is customary to specify hardware metrics and
transfer speeds to the basis 1000 (SI decimal), while software metrics
and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary).
So far we specified everything in IEC, let's fix that and be more
true to what's otherwise customary. Since we don't want to parse "Mi"
instead of "M" we document each time what the context used is.
|
|
This also changes the names to MTUBytes and BitsPerSecond, respectively. Notice
that the speed was mistakenly documented to be in bytes before this change.
|
|
Also fix a copy-paste error that broke matching on interface name.
|
|
That's what we do for all options in the other man pages. It helps
clarifying that these are options that values need to be assigned to.
|
|
|
|
|
|
|
|
It should match on the driver of the parent device.
|
|
|
|
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
|
|
Actually 'STDOUT' is something that doesn't appear anywhere: in the
stdlib we have 'stdin', and there's only the constant STDOUT_FILENO,
so there's no reason to use capitals. When refering to code,
STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in
other places they are replaced with normal phrases like standard
output, etc.
|
|
* standardize capitalization of STDIN, STDOUT, and STDERR
* reword some sentences for clarity
* reflow some very long lines to be shorter than ~80 characters
* add some missing <literal>, <constant>, <varname>, <option>, and <filename> tags
|
|
This reverts commit 4cd1214db6cf4b262e8ce6381bc710091b375c96.
This may still be fixed in the kernel, revert this for now until
we see how it all shakes out.
|
|
When DEVTYPE is not set for a nic, it means it is a wired/ethernet
device.
|
|
This is a recurring submission and includes corrections to:
- missing words, preposition choice.
- change of /lib to /usr/lib, because that is what most distros are
using as the system-wide location for systemd/udev files.
|
|
Use Description only internally, and allow Alias to be set
as a separate option. For instance SNMP uses ifalias for
a specific purpose, so let's not write to it by default.
|
|
|
|
- Refer to net_setup_link, not net-setup-link
- Mention the required file extension earlier
|
|
|
|
|
|
|
|
This includes regularly-submitted corrections to comma setting and
orthographical mishaps that appeared in man/ in recent commits.
|
|
|
|
Based on a patch by Kay Sievers.
A tag is exported at boot as a symlinks to the device node in the folder
/run/udev/static_node-tags/<tagname>/, if the device node exists.
These tags are cleaned up by udevadm info --cleanup-db, but are otherwise
never removed.
|
|
Use proper grammar, word usage, adjective hyphenation, commas,
capitalization, spelling, etc.
To improve readability, some run-on sentences or sentence fragments were
revised.
[zj: remove the space from 'file name', 'host name', and 'time zone'.]
|
|
When manpages are displayed on a terminal, <literal>s are indistinguishable
from surrounding text. Add quotes everywhere, remove duplicate quotes,
and tweak a few lists for consistent formatting.
https://bugzilla.redhat.com/show_bug.cgi?id=874631
|
|
Sometimes an entry is not successfully written, and we end up with
data items which are "unlinked", not connected to, and not used by any
entry. This will usually happen when we write to write a core dump,
and the initial small data fields are written successfully, but
the huge COREDUMP= field is not written. This situation is hard
to avoid, but the results are mostly harmless. Thus only warn about
unused data items.
Also, be more verbose about why journal files failed verification.
This should help diagnose journal failure modes without resorting
to a hexadecimal editor.
https://bugs.freedesktop.org/show_bug.cgi?id=65235 (esp. see
system.journal attached to the bug report).
|
|
Unlike IMPORT and PROGRAM, RUN is not executed inline, but after all the rules of the given event have been processed.
|
|
Moved from udev(7) to systemd-udevd.service(8), where the rest of the
documentation of the configuration of the daemon lives.
|
|
The new IMPORT{builtin} and RUN{builtin} were not documented. Also make it clear
that RUN= is really an alias for RUN{program}=.
|
|
New sections are added: PAM options, crypttab options, commandline
options, miscellaneous. The last category will be used for all
untagged <varname> elements.
Commandline options sections is meant to be a developer tool: when
adding an option it is sometimes useful to be able to check if
similarly named options exist elsewhere.
|
|
Use proper (or at least more proper) docbook tags for various
fields. This should help with automatic parsing of the documentation.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=55890
Fixed typos, serial comma, and removed "either" as there were more
than two options. Also did an extra rename of "system-shutdown"
to "systemd-shutdown" that was forgotten in commit
8bd3b8620c80d0f2383f2fb04315411fc8077ca1
|
