summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2015-01-24tmpfiles: do not bump access times of directories we are cleaning upZbigniew Jędrzejewski-Szmek
Both plain opendir() and glob() will bump access time. Privileged option O_NOATIME can be used to prevent the access time from being updated. We already used it for subdirectories of the directories which we were cleaning up. But for the directories specified directly in the config files, we wouldn't do that. This means that, paradoxically, our own temporary directories for PrivateTmp would stay around forever, as long as one let systemd-tmpfiles-clean.service run regularly, because they had their own glob patterns specified. https://bugzilla.redhat.com/show_bug.cgi?id=1183684
2015-01-23man: bring tmpfiles.d(5) in line with codeZbigniew Jędrzejewski-Szmek
2015-01-22man: fix typosRonny Chevalier
2015-01-22networkd: Introduce ip6gre and ip6gretapSusant Sahani
This patch introduces ipv6 gre and gretap. test: ip6gre.netdev: [NetDev] Name=ip6gretap Kind=ip6gretap [Tunnel] Local=2a00:ffde:4567:edde::4987 Remote=2001:473:fece:cafe::5179 ip6gre.network: [Match] Name=eno16777736 [Network] Tunnel=ip6gretap ip link 6: ip6gre@eno16777736: <POINTOPOINT,NOARP> mtu 1448 qdisc noop state DOWN mode DEFAULT group default link/gre6 2a:00:ff:de:45:67:ed:de:00:00:00:00:00:00:49:87 peer 20:01:04:73:fe:ce:ca:fe:00:00:00:00:00:00:51:79
2015-01-22networkd: Introduce IP6 tunnelSusant Sahani
This patch enables networkd to create IP6 tunnels example conf: ipip6.netdev: [NetDev] Name=ipip6-tunnel Kind=ip6tnl [Tunnel] Mode=ip4ipv6 Local=2a00:ffde:4567:edde::4987 Remote=2001:473:fece:cafe::5179 ipip6.network [Match] Name=wlan0 [Network] Tunnel=ipip6-tunnel 23: ipip6-tunnel@wlan0: <POINTOPOINT,NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default link/tunnel6 2a00:ffde:4567:edde::4987 peer 2001:473:fece:cafe::5179
2015-01-22networkd: introduce gretapSusant Sahani
This patch introdeces gretap to networkd
2015-01-22man: document new download magicLennart Poettering
2015-01-22Use eurlatgr as the example console fontMarko Myllynen
See https://fedoraproject.org/wiki/Changes/NewDefaultConsoleFont https://bugzilla.redhat.com/show_bug.cgi?id=1182529
2015-01-22shared/acl-util: add mask only when needed, always add base ACLsZbigniew Jędrzejewski-Szmek
For ACLs to be valid, a set of entries for user, group, and other must be always present. Always add those entries. While at it, only add the mask ACL if it is actually required, i.e. when at least on ACL for non-owner group or user exists.
2015-01-22tmpfiles: implement augmenting of existing ACLsZbigniew Jędrzejewski-Szmek
This is much more useful in practice (equivalent to setfacl -m).
2015-01-22tmpfiles: make t and a globby, add their recursive versions T and AZbigniew Jędrzejewski-Szmek
For types which adapt existing files it is generally more useful to accept globs. In analogy to z and Z, add recursive versions using uppercase letters. Technically, making a accept globs is backwards incompatible, but in practice it probably isn't yet widely used and we can assume that most people don't create files with wildcards in names. Functions which are used as callbacks, but not directly on items, are renamed not to have "item_" prefix.
2015-01-22tmpfiles: add 'a' type to set ACLsZbigniew Jędrzejewski-Szmek
2015-01-22tmpfiles: attach an array of items to each pathZbigniew Jędrzejewski-Szmek
The data structure used by tmpfiles is changed: instead of hashmaps mapping {path → Item*} we now have hashmaps containing {path -> ItemArray}, where ItemArray contains a pointer to an array of Items. For current code it doesn't matter much, but when we add new types it is easier to simply add a new Item for a given path, then to coalesce multiple lines into one Item. In the future, this change will also make it possible to remember the file and line where each Item originates, and use that in reporting errors. Currently this is not possible, since each Item can be created from multiple lines.
2015-01-19man: add networkctl(1)Zbigniew Jędrzejewski-Szmek
2015-01-19man: use one description of --no-legendZbigniew Jędrzejewski-Szmek
2015-01-20nspawn: add ipvlan supportTom Gundersen
2015-01-19networkd: netdev - add ipvlan supportTom Gundersen
2015-01-19systemctl: fix import-environment description, trim help to 80 colsZbigniew Jędrzejewski-Szmek
2015-01-18man: reindent tmpfiles.d(5)Zbigniew Jędrzejewski-Szmek
Reindent to 2 spaces, use more markup.
2015-01-18man: mention "wheel" and "adm" in journalctl(1)Zbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=70866
2015-01-18man: reindent journalctl(1)Zbigniew Jędrzejewski-Szmek
Reindent with two spaces, use non-breaking spaces, add <literal> tags.
2015-01-15os-release: Add PRIVACY_POLICY_URLBastien Nocera
2015-01-15nspawn,machined: change default container image location from ↵Lennart Poettering
/var/lib/container to /var/lib/machines Given that this is also the place to store raw disk images which are very much bootable with qemu/kvm it sounds like a misnomer to call the directory "container". Hence, let's change this sooner rather than later, and use the generic name, in particular since we otherwise try to use the generic "machine" preferably over the more specific "container" or "vm".
2015-01-13man: remove "nofail" from systemd.swap(5)Zbigniew Jędrzejewski-Szmek
As suggested by Marcos Felipe Rasia de Mello <marcosfrm@gmail.com>.
2015-01-13networkd: make IP forwarding for IPv4 and IPv6 individually configurableLennart Poettering
2015-01-13networkd: introduce an AddressFamilyBoolean enum typeLennart Poettering
This introduces am AddressFamilyBoolean type that works more or less like a booleaan, but can optionally turn on/off things for ipv4 and ipv6 independently. THis also ports the DHCP field over to it.
2015-01-13nspawn: add "-n" shortcut for "--network-veth"Lennart Poettering
Now that networkd's IP masquerading support means that running containers with "--network-veth" will provide network access out of the box for the container, let's add a shortcut "-n" for it, to make it easily accessible.
2015-01-13doc: add cross-references between systemd.{link, netdev, network}Jan Engelhardt
2015-01-13nspawn: add new option "--port=" for exposing container ports on the local hostLennart Poettering
This exposes an IP port on the container as local port using DNAT.
2015-01-13networkd: add minimal IP forwarding and masquerading support to .network filesLennart Poettering
This adds two new settings to networkd's .network files: IPForwarding=yes and IPMasquerade=yes. The former controls the "forwarding" sysctl setting of the interface, thus controlling whether IP forwarding shall be enabled on the specific interface. The latter controls whether a firewall rule shall be installed that exposes traffic coming from the interface as coming from the local host to all other interfaces. This also enables both options by default for container network interfaces, thus making "systemd-nspawn --network-veth" have network connectivity out of the box.
2015-01-09loginctl: make session/user arguments optional for a number commands, and ↵Lennart Poettering
imply calling session/user instead This turns "lock-session", "activate", "unlock-session", "enable-linger", "disable-linger" into commands that take no argument, optionally in which case the callers session/user is implied.
2015-01-09man: document that 'loginctl activate' only takes a single argumentLennart Poettering
2015-01-09loginctl: make "loginctl session-status" without session ID show the ↵Lennart Poettering
caller's session status Similar for user-status and seat-status.
2015-01-08man: remove references to systemadm from systemctl man pageLennart Poettering
The tool is badly maintained and we shouldn't refence such old cruft.
2015-01-08man: bring machinectl man page up-to-dateLennart Poettering
2015-01-08man: bring systemctl man page and --help text into the same orderLennart Poettering
2015-01-08man: add the same command sections to the man page as the --help text showsLennart Poettering
2015-01-08machinectl: given that machinectl invokes a number of polkit enabled ↵Lennart Poettering
methods, start the polkit agent on terminals
2015-01-08machinectl: show most recent log output in "machinectl status", tooLennart Poettering
2015-01-08loginctl: show the 10 most recent log user/session log lines in "loginctl ↵Lennart Poettering
user-status" and "loginctl session-status"
2015-01-08cryptsetup: support header= optionAndrey Chaser
https://bugs.freedesktop.org/show_bug.cgi?id=66396
2015-01-08doc: fix stale references to systemd-verifyDave Reisner
This was subsumed into systemd-analyze back in 142c4ecaa98.
2015-01-08man: add hostnamed chassis type "embedded" to machine-info(5)Peter Mattern
man machine-info lacks hostnamed chassis type "embedded" as introduced in 218. The following lines should fix this.
2015-01-08man: mention where timesyncd keeps the timestampZbigniew Jędrzejewski-Szmek
2015-01-07man: document nss-mymachinesLennart Poettering
2015-01-07man: add an alias to libnss_myhostname.so2 for nss-myhostnameLennart Poettering
The module appears under the name "libnss_myhostname.so.2" in the file system, hence let's link it up under that name.
2015-01-07man: rework nss-myhostname man pageLennart Poettering
Remove a number of incorrect links, and explain that "localhost" and "gateway" are now resolved by it, too.
2015-01-05man: clarify path escaping and reference systemd-escapeChris Atkinson
This patch adds more detail to the description of how path escaping operates and provides a pointer to the systemd-escape program. Either would serve to answer the question raised in the bug report, so hopefully this will allow it to be closed. https://bugs.freedesktop.org/show_bug.cgi?id=87688
2015-01-06core: add new logic for services to store file descriptors in PID 1Lennart Poettering
With this change it is possible to send file descriptors to PID 1, via sd_pid_notify_with_fds() which PID 1 will store individually for each service, and pass via the usual fd passing logic on next invocation. This is useful for enable daemon reload schemes where daemons serialize their state to /run, push their fds into PID 1 and terminate, restoring their state on next start from the data in /run and passed in from PID 1. The fds are kept by PID 1 as long as no POLLHUP or POLLERR is seen on them, and the service they belong to are either not dead or failed, or have a job queued.
2015-01-01man: Clarify effect when both calendar day and date are listed in timerChris Atkinson
See bug 87859 (https://bugs.freedesktop.org/show_bug.cgi?id=87859). Bug reporter found the language describing the effect of specifying both a day and date unclear; hopefully the attached patch will clarify and allow the bug to be closed.