summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2014-07-15sd-dhcp-client: make request broadcasts opt-inTom Gundersen
It appears there is no good way to decide whether or not broadcasts should be enabled, there is hardware that must have broadcast, and there are networks that only allow unicast. So we give up and make this configurable. By default, unicast is used, but if the kernel were to inform us abotu certain interfaces requiring broadcast, we could change this to opt-in by default in those cases.
2014-07-14man: systemd.netdev - make it clear that we do not touch preexisting netdevsTom Gundersen
We will happily use bridges/bonds as master devices, but we will not change their settings if they were created by someone else.
2014-07-14networkd: dhcp add vendor class indentifier option 60Susant Sahani
Vendor Class Identifier be used by DHCP clients to identify their vendor type and configuration. When using this option, vendors can define their own specific identifier values, such as to convey a particular hardware or operating system configuration or other identifying information. Vendor-specified DHCP options—features that let administrators assign separate options to clients with similar configuration requirements. For example, if DHCP-aware clients for example we want to separate different gateway and option for different set of people (dev/test/hr/finance) in a org or devices for example web/database servers or let's say in a embedded device etc and require a different default gateway or DNS server than the rest of clients.
2014-07-14networkd: make metric of routes configurableSusant Sahani
Now route metric can be configuted via conf file: example conf: [Match] Name=em1 [Route] Gateway=192.168.1.12 Metric=10 Test: ip route output default via 192.168.1.12 dev em1 metric 10 [tomegun: squash TODO update and reword man page a bit]
2014-07-13man: mention XDG_DATA_HOME in systemd.unitTanu Kaskinen
2014-07-13man: sysusers.d correct default user shellSjoerd Simons
For the non-root user sysusers uses nologin as the default shell, not login. Correct the documentation to match the code.
2014-07-13man: add systemd-coredump(8) and a bunch of linksZbigniew Jędrzejewski-Szmek
2014-07-11hostnamed: introduce new location machin-info field, tooLennart Poettering
2014-07-11journald: turn ForwardToSyslog= off by defaultLennart Poettering
After all, rsyslog and friends nowadays read their data directly from the journal, hence the forwarding is unnecessary in most cases.
2014-07-11Add DEPLOYMENT to hostnamectlJóhann B. Guðmundsson
[zj: remove the check against a fixed list of environments.]
2014-07-11shell-completion,man: beef up chassis completions and descriptionZbigniew Jędrzejewski-Szmek
Parameters to hostnamectl command are not optional and should not be marked as such in the man page.
2014-07-10man: document x-systemd.device-timeout for crypttabZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=54210
2014-07-10man: proper link for dmesgZbigniew Jędrzejewski-Szmek
2014-07-10sysusers: allow overrides in /etc and /runZbigniew Jędrzejewski-Szmek
An administrator might want to block a certain sysusers config file from being executed, e.g. to block the creation of a certain user. Only a relatively short description is added in the man page, since overrides should be relatively rare.
2014-07-09sysusers: don't allow user names longer than UT_NAMESIZELennart Poettering
As pointed out by Miloslav Trmač it might be a good idea to make sure that usernames stay with in the utmp-defined limits.
2014-07-09hostnamed: update documentation with new "watch" chassis typeTomasz Torcz
2014-07-07man: add a mapping for external manpagesZbigniew Jędrzejewski-Szmek
It is annoying when we have dead links on fd.o. Add project='man-pages|die-net|archlinux' to <citerefentry>-ies. In generated html, add external links to http://man7.org/linux/man-pages/man, http://linux.die.net/man/, https://www.archlinux.org/. By default, pages in sections 2 and 4 go to man7, since Michael Kerrisk is the autorative source on kernel related stuff. The rest of links goes to linux.die.net, because they have the manpages. Except for the pacman stuff, since it seems to be only available from archlinux.org. Poor gummiboot gets no link, because gummitboot(8) ain't to be found on the net. According to common wisdom, that would mean that it does not exist. But I have seen Kay using it, so I know it does, and deserves to be found. Can somebody be nice and put it up somewhere?
2014-07-07man: document systemd-escape(1)Lennart Poettering
2014-07-07networkd: add support for modeSusant Sahani
This patch adds supports networkd to configure bond mode during creation via persistent conf. Mode can be configured with conf param 'Mode'. A new section Bond is added to the conf to support bond mode. These modes can be configured now. balance-rr active-backup balance-xor broadcast 802.3ad balance-tlb balance-alb Example conf file: test-bond.conf [NetDev] Name=bond1 Kind=bond [Bond] Mode=balance-xor Test case: 1. start networkd service: 12: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 22:89:6c:47:23:d2 brd ff:ff:ff:ff:ff:ff 2. find bond mode: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: load balancing (xor) Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 Changes: 1. Added file networkd-bond.c 2. Bond mode enum BondMode 3. conf section [Bond] [tomegun: whitespace]
2014-07-07firstboot: get rid of firstboot generator again, introduce ↵Lennart Poettering
ConditionFirstBoot= instead As Zbigniew pointed out a new ConditionFirstBoot= appears like the nicer way to hook in systemd-firstboot.service on first boots (those with /etc unpopulated), so let's do this, and get rid of the generator again.
2014-07-07man: document systemd-firstboot(1)Lennart Poettering
2014-07-07man: drop references to the --priviliged command line option which has been ↵Lennart Poettering
removed a while back
2014-07-07man: chroot jails are no longer detected by ConditionVirtualization=Lennart Poettering
2014-07-07man: add missing archs to ConditionArchitecture= descriptionLennart Poettering
2014-07-07man: network - document Peer keyTom Gundersen
2014-07-04man: document nspawn's new --volatile switchLennart Poettering
2014-07-04man: netdev - mention tun and tapTom Gundersen
Reported by Moviuro <moviuro@gmail.com>
2014-07-03man: add link to Open Group Base SpecificationsZbigniew Jędrzejewski-Szmek
2014-07-03man: document that systemctl's -H may now be used to connect directly to a ↵Lennart Poettering
container on a remote host
2014-07-03sysusers: add new line type "m" to add users as members to groupsLennart Poettering
2014-07-03man: reference RestartForceExitStatus= from the Restart= descriptionLennart Poettering
2014-07-03core: introduce new RestartForceExitStatus= service settingLennart Poettering
This does the inverse of RestartPreventExitStatus=: it forces a restart of a service when a certain exit status is returned by a service process.
2014-07-03networkd: tuntap - default to no packet informationTom Gundersen
Susant says: > ip tuntap turns this off by default. Let's follow ip(8) here as that should be the least surprising.
2014-07-03networkd: tuntap - manpage fixesTom Gundersen
2014-07-03networkd: Introduce tun/tap deviceSusant Sahani
This patch introduces TUN/TAP device creation support to networkd. Example conf to create a tap device: file: tap.netdev ------------------ [NetDev] Name=tap-test Kind=tap [Tap] OneQueue=true MultiQueue=true PacketInfo=true User=sus Group=sus ------------------ Test: 1. output of ip link tap-test: tap pi one_queue UNKNOWN_FLAGS:900 user 1000 group 1000 id: uid=1000(sus) gid=10(wheel) groups=10(wheel),1000(sus) context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 Modifications: Added: 1. file networkd-tuntap.c 3. netdev kind NETDEV_KIND_TUN and NETDEV_KIND_TAP 2. Tun and Tap Sections and config params to parse conf and gperf conf parameters [tomegun: tweak the 'kind' checking for received ifindex]
2014-07-03man: /usr/bin may contain binaries in any compatible arch, not just the ↵Lennart Poettering
primary one
2014-07-03man: fix links to systemd-efi-boot-generator(8)Lennart Poettering
2014-07-02path: add new "systemd-path" utility for querying paths described in ↵Lennart Poettering
file-hierarchy(7) This new tool is based on "sd-path", a new (so far unexported) API for libsystemd, that can hopefully grow into a workable API covering /opt and more one day.
2014-07-01networkd: netdev - add dummy supportTom Gundersen
2014-07-01networkd: send hostname to dhcp serverEugene Yakubovich
Send hostname (option 12) in DISCOVER and REQUEST messages so the DHCP server could use it to register with dynamic DNS and such. To opt-out of this behaviour set SendHostname to false in [DHCP] section of .network file [tomegun: rebased, made sure a failing set_hostname is a noop and moved config from DHCPv4 to DHCP]
2014-07-01man: bring systemd.network(5) up-to-dateTom Gundersen
Based on diff by 'poma'.
2014-07-01man: bring systemd.netdev(5) up-to-dateTom Gundersen
Based on a diff by the mysterious 'poma'.
2014-07-01typo fixesThomas Hindoe Paaboel Andersen
2014-07-01man: file-hierarchy - emphasize /usr/lib/$arch-id instead of $libdirKay Sievers
2014-07-01man/sd_journal_get_data: fix variable naming in exampleChristian Hesse
2014-07-01man/sd_journal_next: fix argument in exampleChristian Hesse
The example does not compile, it fails with: error: passing argument 3 of ‘sd_journal_get_data’ from incompatible pointer type Cast to (const void **) to avoid this.
2014-07-01man: document directories in $HOME, too, in file-hierarchy(7)Lennart Poettering
2014-07-01man: document ConditionNeedsUpdate=Lennart Poettering
2014-07-01man: extend a bit what to expect from the various places apps can store dataLennart Poettering
2014-07-01man: add sections about file node types and write access to file-hierarchy(7)Lennart Poettering