summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2014-03-11man: fix description of systemctl --after/--beforeAndrey Borzenkov
It was backward - --after fetches After property, so units shown really come *before* unit given as argument. Same for --before.
2014-03-11man: multiple sleep modes are to be separated by whitespace, not commasLennart Poettering
As pointed out by Jason A. Donenfeld.
2014-03-10nspawn: add --image= switch to boot GPT disk images that follow the ↵Lennart Poettering
Discoverable Partitions Specification
2014-03-10man: fix formatting of uuidsLennart Poettering
2014-03-09man: fix example in systemd.linkpoma
'man/systemd.link.xml' recovery from: commit eac684ef1c29684b1bcd27a89c38c202e568e469 Author: Tom Gundersen <teg@jklm.no> Date: Tue Feb 25 19:30:40 2014 +0100 man: split out systemd.net{work,dev}(5) from systemd-networkd(8)
2014-03-07man: reference the Discoverable Partitions Spec from the gpt-auto-generator ↵Lennart Poettering
man page
2014-03-07man: add missing commaZbigniew Jędrzejewski-Szmek
marcosf0> missing comma in udevadm "see also" section
2014-03-06build-sys: update intructions for Makefile-man.am regenerationZbigniew Jędrzejewski-Szmek
2014-03-06man: describe functions for appending to messagesZbigniew Jędrzejewski-Szmek
2014-03-07gpt-auto-generator: automatically find the root disk of the systemLennart Poettering
When run in an initrd and no root= argument is set (or is set to root=gpt-auto) we will automatically look for the root partition on the same disk the EFI ESP is located on. Since we look for swap, /home and /srv on the disk the root partition is located on, we hence have a fully discoverable chain: Firmware discovers the EFI ESP partition → the initrd discovers the root partition → the host OS discovers swap, /home, and /srv. Note that this requires an EFI boot loader that sets the LoaderDevicePartUUID EFI variable, such as Gummiboot.
2014-03-06man: systemd-bootchart - fix spacing in commandZachary Cook
Use the same formatting as the systemd-analyze man page, so that man shows a space.
2014-03-06man: update link to LSBZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1073402
2014-03-06man: bring gpt-auto-generator up to dateLennart Poettering
2014-03-05man: ipv4 link-localUmut Tezduyar Lindskog
2014-03-05systemd-run: make sure --nice=, --uid=, --gid=, --setenv= also work in ↵Lennart Poettering
--scope mode
2014-03-05man: document missing options of systemd-runLennart Poettering
2014-03-05systemd-run: add new --property= switch that can set arbitrary properties ↵Lennart Poettering
for the unit that is created The code for parsing these properties is shared with "systemctl set-property", which means all the resource control settings are immediately available.
2014-03-04logind: make $XDG_RUNTIME_DIR a per-user tmpfsLennart Poettering
This way each user allocates from his own pool, with its own size limit. This puts the size limit by default to 10% of the physical RAM size but makes it configurable in logind.conf.
2014-03-04man: networkd - fix typoUmut Tezduyar Lindskog
2014-03-03logind: ignore lid switch if more than 1 display is connectedLennart Poettering
Previously we expected the desktop environment to take an inhibitor lock, but this opened a race on boot-up where logind might already be running but no DE is active. Hence, let's move checking for additional displays into logind. This also opens up this logic for other DEs, given that only GNOME implemented the inhibitor logic so far.
2014-03-03man: networkd - mention resolv.conf symlinkTom Gundersen
2014-03-03core: introduce new RuntimeDirectory= and RuntimeDirectoryMode= unit settingsLennart Poettering
As discussed on the ML these are useful to manage runtime directories below /run for services.
2014-02-25Use /var/run/dbus/system_bus_socket for the D-Bus socketZbigniew Jędrzejewski-Szmek
2014-02-26Revert back to /var/run at a couple of problemsLennart Poettering
This partially reverts 41a55c46ab8fb4ef6727434227071321fc762cce Some specifications we want to stay compatibility actually document /var/run, not /run, and we should stay compatible with that. In order to make sure our D-Bus implementation works on any system, regardless if running systemd or not, we should always use /var/run which is the only path mandated by the D-Bus spec. Similar, glibc hardcodes the utmp location to /var/run, and this is exposed in _UTMP_PATH in limits.h, hence let's stay in sync with this public API, too. We simply do not support systems where /var/run is not a symlink → /run. Hence both are equivalent. Staying compatible with upstream specifications hence weighs more than cleaning up superficial appearance.
2014-02-25Replace /var/run with /run in remaining placesZbigniew Jędrzejewski-Szmek
/run was already used almost everywhere, fix the remaining places for consistency.
2014-02-26exec: imply NoNewPriviliges= only when seccomp filters are used in user modeLennart Poettering
2014-02-26core: add new RestrictAddressFamilies= switchLennart Poettering
This new unit settings allows restricting which address families are available to processes. This is an effective way to minimize the attack surface of services, by turning off entire network stacks for them. This is based on seccomp, and does not work on x86-32, since seccomp cannot filter socketcall() syscalls on that platform.
2014-02-25networkd: add basic support for MACVLANsTom Gundersen
2014-02-25man: refer to systemd.net{work,dev}(5) from systemd-networkd(8)Tom Gundersen
2014-02-25man: split out systemd.net{work,dev}(5) from systemd-networkd(8)Tom Gundersen
2014-02-25man: split out systemd.link(5) from udev(7)Tom Gundersen
2014-02-25man: networkd - clarify that multiple addresses/routes are supportedTom Gundersen
2014-02-25nspawn: add new switch --network-macvlan= to add a macvlan device to the ↵Lennart Poettering
container
2014-02-24core: add global settings for enabling CPUAccounting=, MemoryAccounting=, ↵Lennart Poettering
BlockIOAccounting= for all units at once
2014-02-23man: document that per-interface sysctl variables are applied as network ↵Lennart Poettering
interfaces show up https://bugzilla.redhat.com/show_bug.cgi?id=1062955
2014-02-23core: clean up some confusing regarding SI decimal and IEC binary suffixes ↵Lennart Poettering
for sizes According to Wikipedia it is customary to specify hardware metrics and transfer speeds to the basis 1000 (SI decimal), while software metrics and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary). So far we specified everything in IEC, let's fix that and be more true to what's otherwise customary. Since we don't want to parse "Mi" instead of "M" we document each time what the context used is.
2014-02-22udev: net - allow MTU and Speed to be specified with unitsTom Gundersen
This also changes the names to MTUBytes and BitsPerSecond, respectively. Notice that the speed was mistakenly documented to be in bytes before this change.
2014-02-22cgroup: Extend DeviceAllow= syntax to whitelist groups of devices, not just ↵Lennart Poettering
particular devices nodes
2014-02-21net-util: match on the driver as exposed by ethtool if DRIVER not setTom Gundersen
Also fix a copy-paste error that broke matching on interface name.
2014-02-21man: networkd typo fixesThomas Hindoe Paaboel Andersen
2014-02-21man: suffix networkd config file options with "="Lennart Poettering
That's what we do for all options in the other man pages. It helps clarifying that these are options that values need to be assigned to.
2014-02-21man: split settings documentaiton in systemd.unit(5) into two sectionsLennart Poettering
2014-02-21man: don't document ".include" in configuration files anymore as first step ↵Lennart Poettering
to deprecate them one day
2014-02-21.network/.netdev/.link: allow to match on architectureTom Gundersen
2014-02-21man: there is no ExecStopPre= for service unitsLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=73177
2014-02-20man: xinclude pkg-config noteZbigniew Jędrzejewski-Szmek
2014-02-20man: xinclude --host/--machineZbigniew Jędrzejewski-Szmek
As usual, those common options are pushed to the end.
2014-02-20man: xinclude --user/--systemZbigniew Jędrzejewski-Szmek
2014-02-20man: xinclude --help/--version/--no-pagerZbigniew Jędrzejewski-Szmek
2014-02-20build-sys: add conditionals and regenerate manpage listZbigniew Jędrzejewski-Szmek
The list of man pages is auto generated, based on conditonal='...' attributes in the man page itself.