summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2015-06-11Merge pull request #3 from threatgrid/more_cgtop_enhancementsLennart Poettering
cgtop enhancements for easier machine-readable output
2015-06-10man: clarify that IMPORT{program} is done only for zero exit codeAndrei Borzenkov
2015-06-10man: udevd - correct default event timeoutTom Gundersen
This was changed from 30 to 180 seconds quite some time ago.
2015-06-09cgtop: allow user to force looping behavior even in non-TTY modeCharles Duffy
2015-06-09cgtop: raw output option (disable conversion to human-readable units)Charles Duffy
2015-06-08Revert "networkd: create "kernel" setting for IPForwarding"Lennart Poettering
2015-06-08man: systemd.link - explain random MAC addressesTom Gundersen
Two of the bits in the MAC address are set unconditioanlly, and the rest is randomized, make this clear in the documentation (as it currently read as if it was all random).
2015-06-03systemctl: Use /usr/bin/editor if availableMichael Biebl
If the EDITOR environment variable is not set, the Debian policy recommends to use the /usr/bin/editor program as default editor. This file is managed via the dpkg alternatives mechanism and typically used in Debian/Ubuntu and derivatives to configure the default editor. See section 11.4 of the Debian policy [1]. Therefor prefer /usr/bin/editor over specific editors if available. [1] https://www.debian.org/doc/debian-policy/ch-customized-programs.html
2015-06-03Merge pull request #41 from mischief/ipforwardingTom Gundersen
networkd: create "kernel" setting for IPForwarding
2015-06-02man: document IPForward=kernel optionNick Owens
2015-06-03remove gudev and gtk-docKay Sievers
The library moved to: https://git.gnome.org/browse/libgudev/
2015-06-02man: replace hard-coded /usr/libDaniel Mack
Replace some /usr/lib occurences in man/ with &rootprefix;/lib.
2015-05-28man: use configured path for mount and umount binaries in manpagesFilipe Brandenburger
Export the MOUNT_PATH and UMOUNT_PATH variables as XML entities and use them in the systemctl.1 manpage instead of hardcoding the path in /usr/bin. Tested: - Ran ./configure ac_cv_path_MOUNT_PATH=/bin/mount (same for umount) and rebuilt the manpages, confirmed that the correct path was in man/systemctl.1 - Rebuilt man/systemd.directives.xml and the man pages derived from it, confirmed that the correct paths were there as well.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-05-27man: fix systemd.resource-control(5) volume numberPatrick Donnelly
2015-05-26treewide: fix typosTorstein Husebø
2015-05-25swap: use swapon -oKarel Zak
This patch simplify swapon usage in systemd. The command swapon(8) since util-linux v2.26 supports "-o <list>". The idea is exactly the same like for mount(8). The -o specifies options in fstab-compatible way. For systemd it means that it does not have to care about things like "discard" or another swapon specific options. swapon -o <options-from-fstab> For backward compatibility the code cares about "Priority:" swap unit field (for a case when Priority: is set, but pri= in the Options: is missing). References: http://lists.freedesktop.org/archives/systemd-devel/2014-October/023576.html
2015-05-23fix typos in systemd-nspawn man pageJonathan Boulle
2015-05-21nspawn: finish user namespace supportLennart Poettering
2015-05-19hostname: Allow comments in /etc/hostnameMartin Pitt
The hostname(1) tool allows comments in /etc/hostname. Introduce a new read_hostname_config() in hostname-util which reads a hostname configuration file like /etc/hostname, strips out comments, whitespace, and cleans the hostname. Use it in hostname-setup.c and hostnamed and remove duplicated code. Update hostname manpage. Add tests. https://launchpad.net/bugs/1053048
2015-05-18man: explain UseDomains a bit moreZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=85397
2015-05-18fstab-generator: add x-systemd.requires and x-systemd.requires-mounts-forKarel Zak
Currently we have no way how to specify dependencies between fstab entries (or another units) in the /etc/fstab. It means that users are forced to bypass fstab and write .mount units manually. The patch introduces new systemd fstab options: x-systemd.requires=<PATH> - to specify dependence an another mount (PATH is translated to unit name) x-systemd.requires=<UNIT> - to specify dependence on arbitrary UNIT x-systemd.requires-mounts-for=<PATH ...> - to specify dependence on another paths, implemented by RequiresMountsFor=. The option may be specified more than once. For example two bind mounts where B depends on A: /mnt/test/A /mnt/test/A none bind,defaults /mnt/test/A /mnt/test/B none bind,x-systemd.requires=/mnt/test/A More complex example with overlay FS where one mount point depends on "low" and "upper" directories: /dev/sdc1 /mnt/low ext4 defaults /dev/sdc2 /mnt/high ext4 defaults overlay /mnt/merged overlay lowerdir=/mnt/low,upperdir=/mnt/high/data,workdir=/mnt/high/work,x-systemd.requires-mounts-for=/mnt/low,x-systemd.requires-mounts-for=mnt/high https://bugzilla.redhat.com/show_bug.cgi?id=812826 https://bugzilla.redhat.com/show_bug.cgi?id=1164334
2015-05-18Use "new" --job-mode= option in more placesZbigniew Jędrzejewski-Szmek
--irreversible/--ignore-dependencies/--fail are deprececated since 4dc5b821ae737914499119e29811fc3346e3d97c. Also add shell completions for --jobs-mode.
2015-05-15coredump: make sure we vacuum by defaultLennart Poettering
Only if both keep_free and max_use are actually 0 we can shortcut things and avoid vacuuming. If either are positive or -1 we need to execute the vacuuming. http://lists.freedesktop.org/archives/systemd-devel/2015-April/031382.html
2015-05-15man: IPMasquerade only implies IPForward=ipv4Benedikt Morbach
at least that's what the code does.
2015-05-15networkd: don't touch global forwarding settingBenedikt Morbach
This reverts commit 43c6d5abacaebf813845934ec8d5e5ee3c431854 (and a small part of 4046d8361c55c80ab8577aea52523b9e6eab0d0c) It turns out we don't actually need to set the global ip_forward setting. The only relevant setting is the one on each interface. What the global toggle actually does is switch forwarding on/off for all currently present interfaces and change the default for new ones. That means that by setting the global ip_forward we - Introduce a race condition, because if the interface with IPForward=yes is brought up after one with IPForward=no, both will have forwarding enabled, because the global switch turns it on for all interfaces. If the other interface comes up first networkd correctly sets forward=0 and it doesn't get overridden. - Change the forwarding setting for interfaces that networkd is not configured to touch, even if the user disabled forwarding via sysctl, either globally or per-interface As forwarding works fine without this, as long as all relevant interfacest individually set IPForward=yes: just drop it This means that non-networkd interfaces use the global default while networkd interfaces default to off if IPForward isn't given.
2015-05-15systemctl: introduce --now for enable, disable and maskJan Synacek
https://bugs.freedesktop.org/show_bug.cgi?id=42940
2015-05-13nspawn: rework custom mount point order, and add support for overlayfsLennart Poettering
Previously all bind mount mounts were applied in the order specified, followed by all tmpfs mounts in the order specified. This is problematic, if bind mounts shall be placed within tmpfs mounts. This patch hence reworks the custom mount point logic, and alwas applies them in strict prefix-first order. This means the order of mounts specified on the command line becomes irrelevant, the right operation will always be executed. While we are at it this commit also adds native support for overlayfs mounts, as supported by recent kernels.
2015-05-11treewide: Correct typos and spell plural of bus consistentTorstein Husebø
2015-05-09man: fix typos in previous comimtZbigniew Jędrzejewski-Szmek
2015-05-09man: document forwarding to syslog betterZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1147651
2015-05-05treewide: fix typosTorstein Husebø
2015-05-05man: document that nspawn -x, --template= and machinectl clone leave ↵Lennart Poettering
hostname and machine id unmodified
2015-05-05man: nspawn is used in production these days, admit thatLennart Poettering
Previously, the man page suggested to only use nspawn for testing, building, and debugging things. However, it is nowadays used in production and used as building block for rocket, hence let's just admit that it's pretty much production ready.
2015-05-05Add VARIANT as a standard value for /etc/os-releaseStephen Gallagher
Some distributions (such as Fedora) are using the VARIANT field to indicate to select packages which of several default configurations they should be using. For example, VARIANT=Server provides a different default firewall configuration (blocking basically everything but SSH and the management console) whereas VARIANT=Workstation opens many other ports for application compatibility. By adding this patch to the manual pages, we can standardize on a cross-distribution mechanism for accomplishing this. Fedora implementation details are available at https://fedoraproject.org/wiki/Packaging:Per-Product_Configuration (David: drop double paranthesis)
2015-05-02man: use utf-8 in systemd-remount-fs.service(8)Zbigniew Jędrzejewski-Szmek
2015-04-30man: update sd_bus_open() documentationLennart Poettering
Update for current function prototypes. Also, document -ESOCKTNOSUPPORT as being returned when protocol version mismatches are detected.
2015-04-29networkd: add man for vti6 tunnelSusant Sahani
2015-04-29man: document when the various sd-login.h calls return ENXIOLennart Poettering
2015-04-29man: document when the sd_bus_creds_xxx() calls return ENXIOLennart Poettering
2015-04-29man: avoid line break in urlLennart Poettering
2015-04-28fsck: remove fsckd again, but keep the door open for external replacementLennart Poettering
For a longer discussion see this: http://lists.freedesktop.org/archives/systemd-devel/2015-April/030175.html This introduces /run/systemd/fsck.progress as a simply AF_UNIX/SOCK_STREAM socket. If it exists and is connectable we'll connect fsck's -c switch with it. If external programs want to get progress data they should hence listen on this socket and will get all they need via that socket. To get information about the connecting fsck client they should use SO_PEERCRED. Unless /run/systemd/fsck.progress is around and connectable this change reverts back to v219 behaviour where we'd forward fsck output to /dev/console on our own.
2015-04-28run: by default, wait until the transient unit finished start-upLennart Poettering
Make this blocking behaviour optional with --no-block, similar to systemctl's switch of this name.
2015-04-28man: clarify that only the first .network file with a matching [Match] mattersLennart Poettering
http://lists.freedesktop.org/archives/systemd-devel/2015-April/031294.html
2015-04-27man: document that nspawn's --bind= switch may be used multiple timesLennart Poettering
2015-04-24man: extend documentation on IPForward= and IPMasquerade=Lennart Poettering
Mention the default values, and clarify how this relates to the underlying sysctls.
2015-04-24shutdownd: kill the old implementationDaniel Mack
Not that all functionality has been ported over to logind, the old implementation can be removed. There goes one of the oldest parts of the systemd code base.
2015-04-22man: fix example in systemd-run(1)Lennart Poettering
Reported by Holger Reif.
2015-04-22man: elaborate on the order by which tmpfiles operations are executedLennart Poettering
2015-04-21build-sys: move systemd.pc from pkgconfiglibdir back into pkgconfigdatadirLennart Poettering
The original idea of systemd.pc was to contain arch-independent system and systemd information. By exposing libdir as part of the fields (added in eb39a6239c631873db62f6a942e6cb3dab0a2db4), it started to carry arch-dependent data, thus breaking multilib systems. It was then moved to pkgconfiglibdir to deal with this (in aec432c6134146e138124c4130be2ee89dca07fa), but actually the right approach is to simply not include libdir in the .pc file at all. THis patch hence more or less reverts both commits again, and moves the .pc file back into pkgconfigdatadir. As alternative for querying the systems primary libdir there's now "systemd-path system-library-arch", hence a more correct alternative exists for querying this variable from the .pc file.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-01 07:32:46 +0000