summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2016-05-20Merge pull request #3290 from htejun/cgroup2-io-compatLennart Poettering
Implement compat translation between IO* and BlockIO* settings
2016-05-20Merge pull request #3235 from dkg/hwaddr-cleanupTom Gundersen
minor improvements for dealing with MAC Addresses
2016-05-19systemctl: restore the no-sync option for legacy halt (#3249)tblume
The sync() call on shutdown had been removed with commit 57371e5829a61e5ee6c9f98404dfc729d6c62608 together with the no-sync option for the shutdown commands. The sync call was restored in commit 4a3ad39957399c4a30fc472a804e72907ecaa4f9 but the no-sync option wasn't re-added. I think we should restore this option at least for the legacy halt command.
2016-05-18core: translate between IO and BlockIO settings to ease transitionTejun Heo
Due to the substantial interface changes in cgroup unified hierarchy, new IO settings are introduced. Currently, IO settings apply only to unified hierarchy and BlockIO to legacy. While the transition is necessary, it's painful for users to have to provide configs for both. This patch implements translation from one config set to another for configs which make sense. * The translation takes place during application of the configs. Users won't see IO or BlockIO settings appearing without being explicitly created. * The translation takes place only if there is no config for the matching cgroup hierarchy type at all. While this doesn't provide comprehensive compatibility, it should considerably ease transition to the new IO settings which are a superset of BlockIO settings. v2: - Update test-cgroup-mask.c so that it accounts for the fact that CGROUP_MASK_IO and CGROUP_MASK_BLKIO move together. Also, test/parent.slice now sets IOWeight instead of BlockIOWeight.
2016-05-18core: add support for IOReadIOPSMax and IOWriteIOPSMaxTejun Heo
cgroup IO controller supports maximum limits for both bandwidth and IOPS but systemd resource control currently only supports bandwidth limits. This patch adds support for IOReadIOPSMax and IOWriteIOPSMax when unified cgroup hierarchy is in use. It isn't difficult to also add BlockIOReadIOPS and BlockIOWriteIOPS for legacy hierarchies but IO control on legacy hierarchies is half-broken anyway, so let's leave it alone for now.
2016-05-17coredump: Improve man pagesPeter Mattern
2016-05-17networkd: Add EmitRouter= option for DHCP Server (#3251)Clemens Gruber
Add an option to disable appending DHCP option 3 (Router) to the DHCP OFFER and ACK packets. This commit adds the boolean option EmitRouter= for the [DHCPServer] section in .network files. Rationale: On embedded devices, it is very useful to have a DHCP server running on an USB OTG ethernet gadget interface to avoid manual setup on the client PCs, but it should only serve IP addresses, no route(r)s. Otherwise, Windows clients experience network connectivity issues, due to them using the address set in DHCP option 3 as default gateway. Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
2016-05-17man: clarify different uses of MACAddressDaniel Kahn Gillmor
Improve the networkd documentation to clarify that Match.MACAddress is for selection, but Link.MACAddress describes an action to be taken.
2016-05-16man: clarify that IOXyz= only applies to the unified hierarchy, and ↵Lennart Poettering
BlockIOXyz= to the legacy hierarchy With this change for each setting we say which hierarachy it applies to briefly in the first sentence of the description, plus in longer form in an extra pargraph at the end, with a recommendation for the counterpart of the option in the other hierarchy. Also adds markup and the "=" suffix to all mentioned settings.
2016-05-16Merge pull request #3193 from htejun/cgroup-io-controllerLennart Poettering
core: add io controller support on the unified hierarchy
2016-05-15namespace: Make private /dev noexec and readonly (#3263)topimiettinen
Private /dev will not be managed by udev or others, so we can make it noexec and readonly after we have made all device nodes. As /dev/shm needs to be writable, we can't use bind_remount_recursive().
2016-05-15/var/tmp instead of /tmp/var in systemd.unit man page (#3262)gdamjan
2016-05-15man: fix typo (#3261)Andre Klärner
2016-05-15networkd: bridge add support to configure multicast snooping (#3223)Susant Sahani
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute it can change the multicast snooping value. IGMP snooping monitors the Internet Group Management Protocol (IGMP) traffic between hosts and multicast routers.
2016-05-12Create initrd-root-device.target synchronization point (#3239)Daniel Drake
Add a synchronization point so that custom initramfs units can run after the root device becomes available, before it is fsck'd and mounted. This is useful for custom initramfs units that may modify the root disk partition table, where the root device is not known in advance (it's dynamically selected by the generators).
2016-05-10man: document the nfs mount option bg as unsupported (#3231)tblume
The nfs mount option bg will not be supported with systemd. Reasons are discussed here: https://github.com/systemd/systemd/pull/3169
2016-05-09networkd: reworkd LLDP emission to allow control of propagation levelLennart Poettering
This allows selecting the propagation level of emitted LLDP packets (specifically: the destination MAC address of the packets). This is useful because it allows generating LLDP packets that optionally cross certain types of bridges. See 802.11ab-2009, Table 7-1 for details.
2016-05-09man: add documentation for the new --network-zone= concept of nspawnLennart Poettering
2016-05-09man: document that nspawn's host0 and ve-* interfaces have default config in ↵Lennart Poettering
networkd
2016-05-06man: link the part about [DHCP] to the DHCP= explanationLennart Poettering
2016-05-06man: move IPv6 note to the right sectionLennart Poettering
Make the XML validate again.
2016-05-06networkd: move the IAID configuration option into the [DHCP] sectionLennart Poettering
It's only relevant to DHCP, and it should be where the DUID is configured too.
2016-05-05Merge pull request #3190 from poettering/logind-fixesZbigniew Jędrzejewski-Szmek
2016-05-05logind: enforce a limit on inhibitors we hand outLennart Poettering
For similar reasons as the recent addition of a limit on sessions. Note that we don't enforce a limit on inhibitors per-user currently, but there's an implicit one, since each inhibitor takes up one fd, and fds are limited via RLIMIT_NOFILE, and the limit on the number of processes per user.
2016-05-05logind: enforce a limit on current user sessionsLennart Poettering
We really should put limits on all resources we manage, hence add one to the number of concurrent sessions, too. This was previously unbounded, hence set a relatively high limit of 8K by default. Note that most PAM setups will actually invoke pam_systemd prefixed with "-", so that the return code of pam_systemd is ignored, and the login attempt succeeds anyway. On systems like this the session will be created but is not tracked by systemd.
2016-05-05core: add io controller support on the unified hierarchyTejun Heo
On the unified hierarchy, blkio controller is renamed to io and the interface is changed significantly. * blkio.weight and blkio.weight_device are consolidated into io.weight which uses the standardized weight range [1, 10000] with 100 as the default value. * blkio.throttle.{read|write}_{bps|iops}_device are consolidated into io.max. Expansion of throttling features is being worked on to support work-conserving absolute limits (io.low and io.high). * All stats are consolidated into io.stats. This patchset adds support for the new interface. As the interface has been revamped and new features are expected to be added, it seems best to treat it as a separate controller rather than trying to expand the blkio settings although we might add automatic translation if only blkio settings are specified. * io.weight handling is mostly identical to blkio.weight[_device] handling except that the weight range is different. * Both read and write bandwidth settings are consolidated into CGroupIODeviceLimit which describes all limits applicable to the device. This makes it less painful to add new limits. * "max" can be used to specify the maximum limit which is equivalent to no config for max limits and treated as such. If a given CGroupIODeviceLimit doesn't contain any non-default configs, the config struct is discarded once the no limit config is applied to cgroup. * lookup_blkio_device() is renamed to lookup_block_device(). Signed-off-by: Tejun Heo <htejun@fb.com>
2016-05-05core: change default trigger limits for socket unitsLennart Poettering
Let's lower the default values a bit, and pick different defaults for Accept=yes and Accept=no sockets. Fixes: #3167
2016-05-04Merge pull request #3156 from keszybz/duid-settingsLennart Poettering
Rework DUID setting
2016-05-04Merge pull request #3170 from poettering/v230-preparation-fixesLennart Poettering
make virtualization detection quieter, rework unit start limit logic, detect unit file drop-in changes correctly, fix autofs state propagation
2016-05-03networkd: Add support to configure IPv6 preferred lifetime (#3102)Susant Sahani
Closes #2166. We only allow 0, infinity and forever. infinity and forever is same.
2016-05-03Merge pull request #3132 from ssahani/route-tableZbigniew Jędrzejewski-Szmek
networkd: add support to set route table
2016-05-03networkd: add support to set route tableSusant Sahani
networkd: add support to set route table 1. add support to configure the table id. if id is less than 256 we can fit this in the header of route as netlink property is a char. But in kernel this proepty is a unsigned 32. Hence if greater that 256 add this as RTA_TABLE attribute. 2. we are not setting the address family now. Now set this property.
2016-05-03man: add a description of DUIDType and DUIDRawDataZbigniew Jędrzejewski-Szmek
This is essentially a revert of f38e0cce75ff2ffbd99f7e382ed39c160bb7d799 (which removed the documentation of DUIDType on purpose). The description is heavily updated for the new semantics. This addresses #3127 § 4.
2016-05-03man: s/similar/similarly/Zbigniew Jędrzejewski-Szmek
2016-05-03man: rename TriggerLimitIntervalBurst to TriggerLimitBurst (#3181)Evgeny Vereshchagin
[/etc/systemd/system/test.socket:2] Unknown lvalue 'TriggerLimitIntervalBurst' in section 'Socket' Follow-up for 8b26cdbd2a94
2016-05-02Merge pull request #3153 from poettering/async-cloneZbigniew Jędrzejewski-Szmek
machined: make "clone" asynchronous, and support copy-based fall-back
2016-05-02core: move enforcement of the start limit into per-unit-type code againLennart Poettering
Let's move the enforcement of the per-unit start limit from unit.c into the type-specific files again. For unit types that know a concept of "result" codes this allows us to hook up the start limit condition to it with an explicit result code. Also, this makes sure that the state checks in clal like service_start() may be done before the start limit is checked, as the start limit really should be checked last, right before everything has been verified to be in order. The generic start limit logic is left in unit.c, but the invocation of it is moved into the per-type files, in the various xyz_start() functions, so that they may place the check at the right location. Note that this change drops the enforcement entirely from device, slice, target and scope units, since these unit types generally may not fail activation, or may only be activated a single time. This is also documented now. Note that restores the "start-limit-hit" result code that existed before 6bf0f408e4833152197fb38fb10a9989c89f3a59 already in the service code. However, it's not introduced for all units that have a result code concept. Fixes #3166.
2016-05-02man: slightly extend the machinectl clone documentationLennart Poettering
2016-04-30Merge pull request #3152 from poettering/aliasfixZbigniew Jędrzejewski-Szmek
Refuse aliases to non-aliasable units in more places Fixes #2730.
2016-04-29Merge pull request #3151 from keszybz/pr3149-2Zbigniew Jędrzejewski-Szmek
Assorted fixes #3149 + one commit tacked on top
2016-04-29man: document that some unit types do not support unit aliases via symlinksLennart Poettering
2016-04-29core: make parsing of RLIMIT_NICE aware of actual nice levelsLennart Poettering
2016-04-29core: rename StartLimitInterval= to StartLimitIntervalSec=Lennart Poettering
We generally follow the rule that for time settings we suffix the setting name with "Sec" to indicate the default unit if none is specified. The only exception was the rate limiting interval settings. Fix this, and keep the old names for compatibility. Do the same for journald's RateLimitInterval= setting
2016-04-29core: move start ratelimiting check after condition checksLennart Poettering
With #2564 unit start rate limiting was moved from after the condition checks are to before they are made, in an attempt to fix #2467. This however resulted in #2684. However, with a previous commit a concept of per socket unit trigger rate limiting has been added, to fix #2467 more comprehensively, hence the start limit can be moved after the condition checks again, thus fixing #2684. Fixes: #2684
2016-04-29core: introduce activation rate limiting for socket unitsLennart Poettering
This adds two new settings TriggerLimitIntervalSec= and TriggerLimitBurst= that define a rate limit for activation of socket units. When the limit is hit, the socket is is put into a failure mode. This is an alternative fix for #2467, since the original fix resulted in issue #2684. In a later commit the StartLimitInterval=/StartLimitBurst= rate limiter will be changed to be applied after any start conditions checks are made. This way, there are two separate rate limiters enforced: one at triggering time, before any jobs are queued with this patch, as well as the start limit that is moved again to be run immediately before the unit is activated. Condition checks are done in between the two, and thus no longer affect the start limit.
2016-04-29man: document that RemainAfterExit= doesn't make much sense for repetitive ↵Lennart Poettering
timers Fixes #3122
2016-04-29networkd: clean up DUID code a bitLennart Poettering
Let's move DUID configuration into the [DHCP] section, since it only makes sense in a DHCP context, and should be close to the configuration of ClientIdentifier= and suchlike. This really shouldn't be a section of its own, we don't have any for any of our other per-protocol specific identifiers... Follow-up for #2890 #2943
2016-04-29man: minor wording fixesLennart Poettering
As suggested in: https://github.com/systemd/systemd/pull/3124#discussion_r61068789
2016-04-26core: set start job timeout from the kernel commandline (#3112)tblume
Add the boot parameter: systemd.default_timeout_start_sec to allow modification of the default start job timeout at boot time.
2016-04-26Merge pull request #3124 from poettering/small-journal-fixesZbigniew Jędrzejewski-Szmek