| Age | Commit message (Collapse) | Author |
|---|
|
As suggested in:
https://github.com/systemd/systemd/pull/3124#discussion_r61068789
|
|
Add the boot parameter: systemd.default_timeout_start_sec to allow modification
of the default start job timeout at boot time.
|
|
|
|
This reverts commit 6e3930c40f3379b7123e505a71ba4cd6db6c372f.
Merge got squashed by mistake.
|
|
nspawn automatic user namespaces
|
|
* sd-journal: detect earlier if we try to read an object from an invalid offset
Specifically, detect early if we try to read from offset 0, i.e. are using
uninitialized offset data.
* journal: when dumping journal contents, react nicer to lines we can't read
If journal files are not cleanly closed it might happen that intermediaery
journal entries cannot be read. Handle this nicely, skip over the unreadable
entries, and log a debug message about it; after all we generally follow the
logic that we try to make the best of corrupted files.
* journal-file: always generate the same error when encountering corrupted files
Let's make sure EBADMSG is the one error we throw when we encounter corrupted
data, so that we can neatly test for it.
* journal-file: when iterating through a partly corruped journal file, treat error like EOF
When we linearly iterate through a corrupted journal file, and we encounter a
read error, don't consider this fatal, but merely as EOF condition (and log
about it).
* journal-file: make seeking in corrupted files work
Previously, when we used a bisection table for seeking through a corrupted
file, and the end of the bisection table was corrupted we'd most likely fail
the entire seek operation. Improve the situation: if we encounter invalid
entries in a bisection table, linearly go backwards until we find a working
entry again.
* man: elaborate on the automatic systemd-journald.socket service dependencies
Fixes: #1603
|
|
Fixes: #1603
|
|
Also, remove documentation for sd_journal_open_container() as we consider it
deprecated now.
|
|
I am pretty sure we shouldn't carry history sections in man pages, since it's
very hard to keep them correctly updated, the current ones are very
out-of-date, and they tend to make APIs appear unnecessarily complex.
|
|
With this change -U will turn on user namespacing only if the kernel actually
supports it and otherwise gracefully degrade to non-userns mode.
|
|
|
|
Closes #3096
|
|
|
|
This suppresses output of the hostname for messages from the local system.
Fixes: #2342
|
|
1970 UTC
aka "UNIX time".
Fixes: #2120
|
|
|
|
Nicer error message is symlinking chokes on an existing file
|
|
|
|
Fixes #1724.
|
|
When "preset" was executed for a unit without install info, we'd warn similarly
as for "enable" and "disable". But "preset" is usually called for all units,
because the preset files are provided by the distribution, and the units are under
control of individual programs, and it's reasonable to call "preset" for all units
rather then try to do it only for the ones that can be installed.
We also don't warn about missing info for "preset-all". Thus it seems reasonable
to silently ignore units w/o install info when presetting.
(In addition, when more than one unit was specified, we'd issue the warning
only if none of them had install info. But this is probably something to fix
for enable/disable too.)
|
|
Kill user session scope by default
|
|
Instead of KillOnlyUsers being a filter for KillUserProcesses, it can now be
used to specify users to kill, independently of the KillUserProcesses
setting. Having the settings orthogonal seems to make more sense. It also
makes KillOnlyUsers symmetrical to KillExcludeUsers.
|
|
This ensures that users sessions are properly cleaned up after.
The admin can still enable or disable linger for specific users to allow
them to run processes after they log out. Doing that through the user
session is much cleaner and provides better control.
dbus daemon can now be run in the user session (with --enable-user-session,
added in 1.10.2), and most distributions opted to pick this configuration.
In the normal case it makes a lot of sense to kill remaining processes.
The exception is stuff like screen and tmux. But it's easy enough to
work around, a simple example was added to the man page in previous
commit. In the long run those services should integrate with the systemd
users session on their own.
https://bugs.freedesktop.org/show_bug.cgi?id=94508
https://github.com/systemd/systemd/issues/2900
|
|
The description in the man page was wrong, KillUserProcesses does
not kill all processes of the user. Describe what the setting
does, and also add links between the relavant sections of the
manual.
Also, add an extensive example which shows how to launch screen
in the background.
|
|
|
|
IPv6 protocol requires a minimum MTU of 1280 bytes on the interface.
This fixes #3046.
Introduce helper link_ipv6_enabled() to figure out whether IPV6 is enabled.
Introduce network_has_static_ipv6_addresses() to find out if any static
ipv6 address configured.
If IPv6 is not configured on any interface that is SLAAC, DHCPv6 and static
IPv6 addresses not configured, then IPv6 will be automatically disabled for that
interface, that is we write "1" to /proc/sys/net/ipv6/conf//disable_ipv6.
|
|
I wanted to add a config line that would empty a directory
without creating it if doesn't exist. Existing actions don't allow
this.
v2: properly add 'e' to needs_glob() and takes_ownership()
|
|
- do not suggest that vendor configuration files should be in
/etc, use /usr/lib/tmpfiles.d instead
- split the first example, because the text talked about "needing
two directories", but then a smack attribute was also set, and
on a different path, which looked like a typo. Replace that
with the example from original patch [1] which added 't'.
- fix the example for /var/tmp/abrt. The 'x' line was redundant,
because /var/tmp/abrt/* is already filtered because "d /var/tmp/abrt"
overrides "d /var/tmp".
[1] http://permalink.gmane.org/gmane.comp.sysutils.systemd.devel/25051
|
|
|
|
|
|
|
|
v2:
- "=" is required, so remove the <optional> tags that v1 added
|
|
* man: change time unit specifier for minutes to "m", not "min".
To alert the reader to the fact that the ambiguous prefix "m" will be
interpreted as minutes, not months.
* man: change 'journal files' to 'archived journal files'.
So that the user may be reminded why they see log entries in the journal
from a time previous to the one they specified when using --vacuum-time.
|
|
|
|
|
|
Fixes: #2889
|
|
Let's make this more digestable to read by making the list of documented unit
file paths a bit shorter.
Specifically, let's drop references to $XDG_CONFIG_HOME and $XDG_DATA_HOME, as
their default values are listed too already. Given that the fact that the XDG
basedir spec makes these paths configurable is probably not a strong point of
the spec, let's drop the reference to the env vars, and keep only the literal,
default paths for them in the list. Of course, we do support the full XDG
basedir spec in this regard, but it's one thing to implement it and another one
to recommend it by documenting it.
Replace "$HOME" by "~", because UNIX.
|
|
This new command removes all, or all hidden container images that have been
downloaded.
|
|
This hopefully reduces confusion resulting in issues like #2992.
|
|
This allows dropping all user configuration and reverting back to the vendor
default of a unit file. It basically undoes what "systemctl edit", "systemctl
set-property" and "systemctl mask" do.
|
|
Now, that the search path logic knows the unit path for transient units we also
can introduce an explicit unit file state "transient" that clarifies to the
user what kind of unit file he is encountering.
|
|
Now that we store the generator directories in LookupPaths we can use this to
intrdouce a new unit file state called "generated", for units in these
directories.
Fixes: #2348
|
|
|
|
We check /etc/machine-id of the container and if it is already populated
we use value from there, possibly ignoring value of --uuid option from
the command line. When dealing with R/O image we setup transient machine
id.
Once we determined machine id of the container, we use this value for
registration with systemd-machined and we also export it via
container_uuid environment variable.
As registration with systemd-machined is done by the main nspawn process
we communicate container machine id established by setup_machine_id from
outer child to the main process by unix domain socket. Similarly to PID
of inner child.
|
|
DHCP DUID parsing fix, logging fix, man-page fix
|
|
|
|
Man coredump sysctl
|
|
Add `--value` option to systemctl and loginctl to only print values
|
|
|
|
Added in 3c171f0b1e.
|
