summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2015-04-20networkd: Add support for bond option.Susant Sahani
This patch adds configurational support for bond option. Test conf: bond.netdev --- [NetDev] Name=bond1 Kind=bond [Bond] ArpAllTargets=all PrimaryReselect=better ArpIntervalSec=10s ArpIpTargets= 192.168.8.102 192.168.8.101 192.168.8.102 --- $cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 10000 ARP IP target/s (n.n.n.n form): 192.168.8.100, 192.168.8.101, 192.168.8.102
2015-04-20networkd vxlan: Add support for enabling UDP checksumsSusant Sahani
Add UDPCheckSum option to enable transmitting UDP checksums when doing VXLAN/IPv4. Add UDP6ZeroChecksumRx, and UDP6ZeroChecksumTx options to enable sending zero checksums and receiving zero checksums in VXLAN/IPv6 [tomegun: rebase manpage due to whitespace changes]
2015-04-17cryptsetup: Implement offset and skip optionsMartin Pitt
These are useful for plain devices as they don't have any metadata by themselves. Instead of using an unreliable hardcoded device name in crypttab you can then put static metadata at the start of the partition for a stable UUID or label. https://bugs.freedesktop.org/show_bug.cgi?id=87717 https://bugs.debian.org/751707 https://launchpad.net/bugs/953875
2015-04-13man: slightly fewer paragraphs can help readabilityLennart Poettering
2015-04-13man: fix examples indentation in tmpfiles.d(5)Lennart Poettering
2015-04-13man: add information about more lines to explanation of argument fieldLennart Poettering
2015-04-13man: document which tmpfiles line types follow symlinksLennart Poettering
Generally, we will not follow symlinks, except for "w". Avoid documentation for now for fifo, device node, directory lines, which currently follow symlinks but better shouldn't.
2015-04-12man: add link to glib in sd_event_run(3)Zbigniew Jędrzejewski-Szmek
2015-04-08man: avoid confusion regarding "time synchronization state"Lennart Poettering
Also, update example in the timedatectl man page to match the actual timedatectl output.
2015-04-08man: remove 'fs' from 'rootfsflags'Zbigniew Jędrzejewski-Szmek
rootfsflags does not appear anywhere else.
2015-04-07logind,systemctl: add reboot to EFI firmware supportJan Janssen
2015-04-07man: fix typos in machinectlRichard Maw
The s/now/not/ unfortunately inverted the meaning.
2015-04-07man: Resolve how to refer to derived names for machinectl containersRichard Maw
"the name it is" is clumsy english, and since the most recently referred to thing was a name anyway we can just leave the "it is". This matches later uses in the same document.
2015-04-07timedatectl: avoid specifically referring to NTPLennart Poettering
systemd-timesyncd not only does NTP, but also manages clock monotonicity using a flags file. In future, it might learn PTP support. Hence don't expose its enablement state as "NTP" but use the more generic term "network time synchronization". After all, for similar reasons systemd-timesyncd is not called systemd-ntpd.
2015-04-07man: update timedatectl(1)'s examplesLennart Poettering
The output didn't match what we output these days. Also, "set-ntp" cannot be used to control chronyd anymore.
2015-04-07man: document in timedatectl(1) that the NTP state shown reflects whether ↵Lennart Poettering
timesyncd is enabled
2015-04-07man: document default timeouts and start limit parametersLennart Poettering
2015-04-02man: don't mention "journalctl /dev/sda"Lennart Poettering
It never worked, and nobody ever worked on it, hence don't mention it.
2015-03-31man: fix line breaks in code examplesLennart Poettering
2015-03-24man: Second example systemd-socket-proxyd does not need a Unix socket listener.David Strauss
2015-03-22man: add journal-remote.conf(5)Chris Morgan
2015-03-19man: add h/H to tmpfiles.d(5)Goffredo Baroncelli
2015-03-15man: standard-conf: change directory reference to wildcardAlison Chaiken
2015-03-15network: add UseNTP DHCP optionMichael Marineau
Despite having the internal logic in place to enable/disable using NTP servers provided by DHCP the network config didn't expose the option.
2015-03-14man: add sd_event_{run,wait,prepare,dispatch,loop}Zbigniew Jędrzejewski-Szmek
2015-03-13man: fix indentation of copyright headersZbigniew Jędrzejewski-Szmek
2015-03-13man: no paren in linkZbigniew Jędrzejewski-Szmek
2015-03-13man: fix name of systemd.journal-fields(7)Zbigniew Jędrzejewski-Szmek
2015-03-13man: fix link to strerror(3)Zbigniew Jędrzejewski-Szmek
2015-03-13man: s/sd_bus_message_get_seqno/sd_bus_message_get_seqnum/Zbigniew Jędrzejewski-Szmek
2015-03-13man: fix name of systemd.resource-control(5)Zbigniew Jędrzejewski-Szmek
2015-03-13man: link to fd.o for dbus stuffZbigniew Jędrzejewski-Szmek
2015-03-13man: link to freebsd.org for inetd(8)Zbigniew Jędrzejewski-Szmek
2015-03-13man: fix a bunch of linksZbigniew Jędrzejewski-Szmek
All hail linkchecker!
2015-03-13tree-wide: there is no ENOTSUP on linuxDavid Herrmann
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
2015-03-13man: update example 2 in systemd.network(5)Zbigniew Jędrzejewski-Szmek
none/both/v4/v6 are deprecated in favour of no/yes/ipv4/ipv6. https://bugs.freedesktop.org/show_bug.cgi?id=89221
2015-03-12man: split paragraphDavid Herrmann
Explicitly put the "multiple EnvironmentFile=" description into its own paragraph to make it much easier to find.
2015-03-11man: fix links to compressorsZbigniew Jędrzejewski-Szmek
2015-03-11udev: add SYSCTL{} supportKay Sievers
2015-03-10tmpfiles: port to unquote_many_words()daurnimator
2015-03-10man: document "machinectl export-tar" and "export-raw"Lennart Poettering
2015-03-10add REMOTE_ADDR and REMOTE_PORT for Accept=yesShawn Landden
2015-03-09man: document machinectl import-tar and import-rawLennart Poettering
2015-03-09man: document that ExecStartPre= is not the place to start long-running ↵Lennart Poettering
processes
2015-03-09Fix typosTorstein Husebø
2015-03-06login: make hold-off timeout configurableDavid Herrmann
This introduces 'HoldoffTimeoutSec' to logind.conf to make IGNORE_LID_SWITCH_{SUSPEND,STARTUP}_USEC configurable. Background: If an external monitor is connected, or if the system is docked, we want to ignore LID events. This is required to support setups where a laptop is used with external peripherals while the LID is closed. However, this requires us to probe all hot-plugged devices before reacting to LID events. But with modern buses like USB, the standards do not impose any timeout on the slots, so we have no chance to know whether a given slot is used or not. Hence, after resume and startup, we have to wait a fixed timeout to give the kernel a chance to probe devices. Our timeout has always been generous enough to support even the slowest devices. However, a lot of people didn't use these features and wanted to disable the hold-off timer. Now we provide a knob to do that.
2015-03-04man: replace obsolete wiki link with man pageZachary Cook
2015-03-04networkd: Make DHCP client ID creation configurableJan Janssen
2015-03-03Do not advertise .d snippets over main config fileZbigniew Jędrzejewski-Szmek
For daemons which have a main configuration file, there's little reason for the administrator to use configuration snippets. They are useful for packagers which need to override settings, but we shouldn't advertise that as the main way of configuring those services. https://bugs.freedesktop.org/show_bug.cgi?id=89397
2015-03-03man: fix typoLennart Poettering
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-14 19:58:07 +0000