| Age | Commit message (Collapse) | Author |
|---|
|
man: add note about sd_watchdog_enabled
|
|
|
|
man: document systemd-sysctl arguments
|
|
|
|
stop managing per-interface IP forwarding settings
|
|
Remove support for RequiresOverridable= and RequisiteOverridable=
|
|
As it turns out the kernel does not support per-interface IPv6 packet
forwarding controls (unlike as it does for IPv4), but only supports a
global option (#1597). Also, the current per-interface management of the
setting isn't really useful, as you want it to propagate to at least one
more interface than the one you configure it on. This created much grief
(#1411, #1808).
Hence, let's roll this logic back and simplify this again, so that we
can expose the same behaviour on IPv4 and IPv6 and things start to work
automatically again for most folks: if a network with this setting set
is set up we propagate the setting into the global setting, but this is
strictly one-way: we never reset it again, and we do nothing for network
interfaces where this setting is not enabled.
Fixes: #1808, #1597.
|
|
The new switch operates like --network-veth, but may be specified
multiple times (to define multiple link pairs) and allows flexible
definition of the interface names.
This is an independent reimplementation of #1678, but defines different
semantics, keeping the behaviour completely independent of
--network-veth. It also comes will full hook-up for .nspawn files, and
the matching documentation.
|
|
As discussed at systemd.conf 2015 and on also raised on the ML:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034880.html
This removes the two XyzOverridable= unit dependencies, that were
basically never used, and do not enhance user experience in any way.
Most folks looking for the functionality this provides probably opt for
the "ignore-dependencies" job mode, and that's probably a good idea.
Hence, let's simplify systemd's dependency engine and remove these two
dependency types (and their inverses).
The unit file parser and the dbus property parser will now redirect
the settings/properties to result in an equivalent non-overridable
dependency. In the case of the unit file parser we generate a warning,
to inform the user.
The dbus properties for this unit type stay available on the unit
objects, but they are now hidden from usual introspection and will
always return the empty list when queried.
This should provide enough compatibility for the few unit files that
actually ever made use of this.
|
|
Previously, the %u, %U, %s and %h specifiers would resolve to the user
name, numeric user ID, shell and home directory of the user configured
in the User= setting of a unit file, or the user of the manager instance
if no User= setting was configured. That at least was the theory. In
real-life this was not ever actually useful:
- For the systemd --user instance it made no sense to ever set User=,
since the instance runs in user context after all, and hence the
privileges to change user IDs don't even exist. The four specifiers
were actually not useful at all in this case.
- For the systemd --system instance we did not allow any resolving that
would require NSS. Hence, %s and %h were not supported, unless
User=root was set, in which case they would be hardcoded to /bin/sh
and /root, to avoid NSS. Then, %u would actually resolve to whatever
was set with User=, but %U would only resolve to the numeric UID of
that setting if the User= was specified in numeric form, or happened
to be root (in which case 0 was hardcoded as mapping). Two of the
specifiers are entirely useless in this case, one is realistically
also useless, and one is pretty pointless.
- Resolving of these settings would only happen if User= was actually
set *before* the specifiers where resolved. This behaviour was
undocumented and is really ugly, as specifiers should actually be
considered something that applies to the whole file equally,
independently of order...
With this change, %u, %U, %s and %h are drastically simplified: they now
always refer to the user that is running the service instance, and the
user configured in the unit file is irrelevant. For the system instance
of systemd this means they always resolve to "root", "0", "/bin/sh" and
"/root", thus avoiding NSS. For the user instance, to the data for the
specific user.
The new behaviour is identical to the old behaviour in all --user cases
and for all units that have no User= set (or set to "0" or "root").
|
|
|
|
[Install] data
Some distributions use alias unit files via symlinks in /usr to cover
for legacy service names. With this change we'll allow "systemctl
enable" on such aliases.
Previously, our rule was that symlinks are user configuration that
"systemctl enable" + "systemctl disable" creates and removes, while unit
files is where the instructions to do so are store. As a result of the
rule we'd never read install information through symlinks, since that
would mix enablement state with installation instructions.
Now, the new rule is that only symlinks inside of /etc are
configuration. Unit files, and symlinks in /usr are now valid for
installation instructions.
This patch is quite a rework of the whole install logic, and makes the
following addional changes:
- Adds a complete test "test-instal-root" that tests the install logic
pretty comprehensively.
- Never uses canonicalize_file_name(), because that's incompatible with
operation relative to a specific root directory.
- unit_file_get_state() is reworked to return a proper error, and
returns the state in a call-by-ref parameter. This cleans up confusion
between the enum type and errno-like errors.
- The new logic puts a limit on how long to follow unit file symlinks:
it will do so only for 64 steps at max.
- The InstallContext object's fields are renamed to will_process and
has_processed (will_install and has_installed) since they are also
used for deinstallation and all kinds of other operations.
- The root directory is always verified before use.
- install.c is reordered to place the exported functions together.
- Stricter rules are followed when traversing symlinks: the unit suffix
must say identical, and it's not allowed to link between regular units
and templated units.
- Various modernizations
- The "invalid" unit file state has been renamed to "bad", in order to
avoid confusion between UNIT_FILE_INVALID and
_UNIT_FILE_STATE_INVALID. Given that the state should normally not be
seen and is not documented this should not be a problematic change.
The new name is now documented however.
Fixes #1375, #1718, #1706
|
|
man patch fix, and port journalctl --sync to use CLOCK_MONOTONIC timestamp files
|
|
Apparently, util-linux' mount command implicitly drops the smack-related
options anyway before passing them to the kernel, if the kernel doesn't
know SMACK, hence there's no point in duplicating this in systemd.
Fixes #1696
|
|
|
|
Dependency engine improvements
|
|
For all units ensure there's an "Automatic Dependencies" section in the
man page, and explain which dependencies are automatically added in all
cases, and which ones are added on top if DefaultDependencies=yes is
set.
This is also done for systemd.exec(5), systemd.resource-control(5) and
systemd.unit(5) as these pages describe common behaviour of various unit
types.
|
|
This directive allows passing environment variables from the system
manager to spawned services. Variables in the system manager can be set
inside a container by passing `--set-env=...` options to systemd-spawn.
Tested with an on-disk test.service unit. Tested using multiple variable
names on a single line, with an empty setting to clear the current list
of variables, with non-existing variables.
Tested using `systemd-run -p PassEnvironment=VARNAME` to confirm it
works with transient units.
Confirmed that `systemctl show` will display the PassEnvironment
settings.
Checked that man pages are generated correctly.
No regressions in `make check`.
|
|
The previous behavior:
When DHCPv6 was enabled, router discover was performed first, and then DHCPv6 was
enabled only if the relevant flags were passed in the Router Advertisement message.
Moreover, router discovery was performed even if AcceptRouterAdvertisements=false,
moreover, even if router advertisements were accepted (by the kernel) the flags
indicating that DHCPv6 should be performed were ignored.
New behavior:
If RouterAdvertisements are accepted, and either no routers are found, or an
advertisement is received indicating DHCPv6 should be performed, the DHCPv6
client is started. Moreover, the DHCP option now truly enables the DHCPv6
client regardless of router discovery (though it will probably not be
very useful to get a lease withotu any routes, this seems the more consistent
approach).
The recommended default setting should be to set DHCP=ipv4 and to leave
IPv6AcceptRouterAdvertisements unset.
|
|
Of course, ideally we'd just use normal synchronous bus calls, but this
is out of the question as long as we rely on dbus-daemon (which logs to
journald, and thus cannot use to avoid cyclic sync loops). Hence,
instead, reuse the wait logic already implemented for --sync, and use a
signal in one direction, and a mtime watch file for the reply.
|
|
With this new "--sync" switch we add a synchronous way to sync
everything queued to disk, and return only after that's complete. This
command gives the guarantee that anything queued before has hit the disk
before the command returns.
While we are at it, also improve the man pages and help text for
journalctl a bit.
|
|
Remove snapshot unit type
|
|
Snapshots were never useful or used for anything. Many systemd
developers that I spoke to at systemd.conf2015, didn't even know they
existed, so it is fairly safe to assume that this type can be deleted
without harm.
The fundamental problem with snapshots is that the state of the system
is dynamic, devices come and go, users log in and out, timers fire...
and restoring all units to some state from the past would "undo"
those changes, which isn't really possible.
Tested by creating a snapshot, running the new binary, and checking
that the transition did not cause errors, and the snapshot is gone,
and snapshots cannot be created anymore.
New systemctl says:
Unknown operation snapshot.
Old systemctl says:
Failed to create snapshot: Support for snapshots has been removed.
IgnoreOnSnaphost settings are warned about and ignored:
Support for option IgnoreOnSnapshot= has been removed and it is ignored
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034872.html
|
|
|
|
Let's make sure "LimitCPU=30min" can be parsed properly, following the
usual logic how we parse time values. Similar for LimitRTTIME=.
While we are at it, extend a bit on the man page section about resource
limits.
Fixes: #1772
|
|
|
|
networkd: add support to configure IPv6 hop limit
|
|
man/journalctl: mention systemd.time(7) where appropriate
|
|
Todo trimming
|
|
Put it at the top of the file, where it's hard to miss.
Also add the mapping of runlevel → target because since it is now
static.
I'm not adding runlevel(7), because we do not want to make obsolete
stuff even more prominent.
|
|
Also, machinectl status is anything but terse. Remove "terse".
|
|
Original bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1182661
|
|
|
|
Fixed kernel-command-line links
|
|
networkd: vxlan add option to set FDB entries
|
|
doc: typo and ortho fixes
|
|
core: support IEC suffixes for RLIMIT stuff
|
|
|
|
|
|
|
|
|
|
|
|
Let's make things more user-friendly and support for example
LimitAS=16G
rather than force users to always use LimitAS=16106127360.
The change is relevant for options:
[Default]Limit{FSIZE,DATA,STACK,CORE,RSS,AS,MEMLOCK,MSGQUEUE}
The patch introduces config_parse_bytes_limit(), it's the same as
config_parse_limit() but uses parse_size() tu support the suffixes.
Addresses: https://github.com/systemd/systemd/issues/1772
|
|
- Existing documentation did not mention that --plain omits the bullets and works on list-units and list-machines.
|
|
Fixed link to chattr man page
|
|
|
|
|
|
The existing text misleads readers into thinking how the notify socket protocol is "internals" and that they can only use the functions. However, the socket is part of the Interface Stability Promise. So, we should drop "internally" from the description so the man page both indicates both how the functions work and how one would talk to the socket directly.
|
|
|
|
|
