summaryrefslogtreecommitdiff
path: root/man
AgeCommit message (Collapse)Author
2013-07-27man: systemd.unit: fix volatile pathBrandon Philips
The volatile path was '/run/systemd/systemd' when it should be '/run/systemd/system'. Fix.
2013-07-26systemctl.8: fix typo in SEE ALSODave Reisner
2013-07-26rework systemd's own process environment handling/passingKay Sievers
Stop importing non-sensical kernel-exported variables. All parameters in the kernel command line are exported to the initial environment of PID1, but suppressed if they are recognized by kernel built-in code. The EFI booted kernel will add further kernel-internal things which do not belong into userspace. The passed original environ data of the process is not touched and preserved across re-execution, to allow external reading of /proc/self/environ for process properties like container*=.
2013-07-26systemctl: remove "load" commandLennart Poettering
"systemctl load" has always been racy since the GC could hit any time, before making use of the loaded unit. Very recent systemd will run GC immeidately after all unit state changes which has the effect that the the effect of "systemctl load" is completely gone now, so let's remove the support for it in "systemctl" for good.
2013-07-26systemctl: move set-log-level to systemd-analyzeLennart Poettering
"systemctl set-log-level" is a command for analysis and tracing hence "systemd-analyze" should be the better home for it, thus allowing us to make the overly large "systemctl" a bit smaller.
2013-07-26systemctl: move "dump" command from systemctl to systemd-analyzeLennart Poettering
It's an analysis command and its format is explicitly not covered by any stability guarantees, hence move away from systemctl and into systemd-analyze, minimizing the already large interface of systemctl a bit. This patch also adds auto-paging to the various systemd-analyze commands where that makes sense
2013-07-26core: allow setting RemainAfterExit= for transient servicesLennart Poettering
2013-07-24tmpfiles: introduce --exclude-prefixDave Reisner
The opposite of --prefix, allows specifying path prefixes which should be skipped when processing rules.
2013-07-24tmpfiles: support passing --prefix multiple timesDave Reisner
2013-07-24journal: immediately sync to disk as soon as we receieve an EMERG/ALERT/CRIT ↵Lennart Poettering
message
2013-07-23man: Fix copy&paste errorMichael Biebl
2013-07-21man: wording and grammar updatesJan Engelhardt
This includes regularly-submitted corrections to comma setting and orthographical mishaps that appeared in man/ in recent commits.
2013-07-21man: udev - add section about hwdbKay Sievers
2013-07-19man: also mention /run/log/journal in systemd-jouranld.service(8)Zbigniew Jędrzejewski-Szmek
2013-07-19man: update documentation of systemctl cgroup commandsLennart Poettering
2013-07-19man: update documentation of slice units a bitLennart Poettering
2013-07-19man: update scope unit man page a bitLennart Poettering
2013-07-19man: update pam_systemd documentation to current state of the codeLennart Poettering
2013-07-19man: list scope and slice units in systemd(1)Lennart Poettering
2013-07-19man: document sd_pid_get_slice() call of libsystemd-loginLennart Poettering
2013-07-19man: a few corrections to the machinectl man pageLennart Poettering
2013-07-19man: update systemd-nspawn regarding new --slice= logicLennart Poettering
2013-07-19man: extend systemd-run man page a littleLennart Poettering
2013-07-19man: drop the old cgroup settings from the man pagesLennart Poettering
2013-07-19man: Fix example to use the new --boot syntaxJan Janssen
2013-07-19core: add %v specifierZbigniew Jędrzejewski-Szmek
2013-07-19man: document Slice= setting (and other fixes)Lennart Poettering
2013-07-19man: add reference to new machined bus API documentation in the wikiLennart Poettering
2013-07-18systemctl: option to list units by stateMaciej Wereski
This allows to show only units with specified LOAD or SUB or ACTIVE state.
2013-07-18journalctl: add ”short-iso” output format with verbose ISO8601 timestampsTomasz Torcz
Example: 2013-07-18T10:10:01+0200 sandworm CROND[20957]: (root) CMD (/usr/lib64/sa/sa1 1 1)
2013-07-17journalctl: remove ":" from the --boot syntaxZbigniew Jędrzejewski-Szmek
Instead of :-0, :1, :5, etc., use -0, 1 or +1, 5, etc. For BOOT_ID+OFFSET, use BOOT_ID+offset or BOOT_ID-offset (either + or - is required). Also make error handling a bit more robust and verbose. Modify the man page to describe the most common case (-b) first, and the second most common case (-b -1) second.
2013-07-16journalctl: augment short mode with a cursor at the endZbigniew Jędrzejewski-Szmek
Two options are added: --show-cursor to print the cursor at the end, and --after-cursor to resume logs on the next line after the previous one.
2013-07-16udev: export tags of "dead" device nodes to /run/udev/static_node-tags/Tom Gundersen
Based on a patch by Kay Sievers. A tag is exported at boot as a symlinks to the device node in the folder /run/udev/static_node-tags/<tagname>/, if the device node exists. These tags are cleaned up by udevadm info --cleanup-db, but are otherwise never removed.
2013-07-16journal: return -ECHILD after a forkZbigniew Jędrzejewski-Szmek
A few asserts are replaced with 'return -EINVAL'. I think that assert should not be used to check argument in public functions. Fields in struct sd_journal are rearranged to make it less swiss-cheesy.
2013-07-16man: improve readability of --output options in journalctl(1)Jason St. John
The list and descriptions of valid output options was difficult to read, so break up the long block of text into discrete man page list items to improve readability.
2013-07-16man: use HTTPS links for links that support itJason St. John
2013-07-16journalctl: Add support for showing messages from a previous bootJan Janssen
Hi, I redid the boot ID look up to use enumerate_unique. This is quite fast if the cache is warm but painfully slow if it isn't. It has a slight chance of returning the wrong order if realtime clock jumps around. This one has to do n searches for every boot ID there is plus a sort, so it depends heavily on cache hotness. This is in contrast to the other way of look-up through filtering by a MESSAGE_ID, which only needs about 1 seek + whatever amount of relative IDs you want to walk. I also have a linked-list + (in-place) mergesort version of this patch, which has pretty much the same runtime. But since this one is using libc sorting and armortized allocation, I prefer this one. To summarize: The MESSAGE_ID way is a *lot* faster but can be incomplete due to rotation, while the enumerate+sort will find every boot ID out there but will be painfully slow for large journals and cold caches. You choose :P Jan
2013-07-16detect-virt: detect User-Mode LinuxRamkumar Ramachandra
In a User-Mode Linux session: $ systemd-detect-virt none Although it is possible to reliably detect virtualization: $ cat /proc/cpuinfo processor : 0 vendor_id : User Mode Linux model name : UML mode : skas host : Linux kytes 3.11.0-rc1-00009-ge5fd680 (...) bogomips : 7007.43 So, grep for the string "\nvendor_id\t: User Mode Linux\n" in /proc/cpuinfo, and say "uml" when asked.
2013-07-16journal: add logging of effective capabilities _CAP_EFFECTIVEShawn Landden
I think this is the most important of the capabilities bitmasks to log.
2013-07-15man: add FILES section to systemd-journald.service(8)Zbigniew Jędrzejewski-Szmek
2013-07-15man: add note about paging and colors to journalctl(1)Zbigniew Jędrzejewski-Szmek
2013-07-16cryptsetup: Add tcrypt supportJan Janssen
Tcrypt uses a different approach to passphrases/key files. The passphrase and all key files are incorporated into the "password" to open the volume. So, the idea of slots that provide a way to open the volume with different passphrases/key files that are independent from each other like with LUKS does not apply. Therefore, we use the key file from /etc/crypttab as the source for the passphrase. The actual key files that are combined with the passphrase into a password are provided as a new option in /etc/crypttab and can be given multiple times if more than one key file is used by a volume.
2013-07-14journalctl: add --force option to recreate FSSShawn Landden
2013-07-13man: tweak WantedBy=/RequiredBy= description a bitZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=55663
2013-07-13man: wording and grammar updateJan Engelhardt
2013-07-12man: document the slice and scope units, add systemd.cgroup(5)Zbigniew Jędrzejewski-Szmek
2013-07-12man: use <literal> not <filename> for suffixesZbigniew Jędrzejewski-Szmek
Especially sentences like "filename ends in .suffix" are easier to parse if the suffix is surrounded by quotes. In sentences like "requires a .service unit", where the suffix is used as a class designation, there is no need to use quotes.
2013-07-12man: remove note about shutdown being legacyZbigniew Jędrzejewski-Szmek
This can only confuse people, because there's no need to discourage people from using shutdown. It is fully functional and supported.
2013-07-11basic SO_REUSEPORT supportShawn Landden
2013-07-10man: document systemd-runZbigniew Jędrzejewski-Szmek